C++ MachineBasicBlock::livein_end方法代码示例

void LiveVariables::runOnBlock(MachineBasicBlock *MBB, const unsigned NumRegs) {
  // Mark live-in registers as live-in.
  SmallVector<unsigned, 4> Defs;
  for (MachineBasicBlock::livein_iterator II = MBB->livein_begin(),
         EE = MBB->livein_end(); II != EE; ++II) {
    assert(TargetRegisterInfo::isPhysicalRegister(*II) &&
           "Cannot have a live-in virtual register!");
    HandlePhysRegDef(*II, nullptr, Defs);
  }

  // Loop over all of the instructions, processing them.
  DistanceMap.clear();
  unsigned Dist = 0;
  for (MachineBasicBlock::iterator I = MBB->begin(), E = MBB->end();
       I != E; ++I) {
    MachineInstr *MI = I;
    if (MI->isDebugValue())
      continue;
    DistanceMap.insert(std::make_pair(MI, Dist++));

    runOnInstr(MI, Defs);
  }

  // Handle any virtual assignments from PHI nodes which might be at the
  // bottom of this basic block.  We check all of our successor blocks to see
  // if they have PHI nodes, and if so, we simulate an assignment at the end
  // of the current block.
  if (!PHIVarInfo[MBB->getNumber()].empty()) {
    SmallVectorImpl<unsigned> &VarInfoVec = PHIVarInfo[MBB->getNumber()];

    for (SmallVectorImpl<unsigned>::iterator I = VarInfoVec.begin(),
           E = VarInfoVec.end(); I != E; ++I)
      // Mark it alive only in the block we are representing.
      MarkVirtRegAliveInBlock(getVarInfo(*I),MRI->getVRegDef(*I)->getParent(),
                              MBB);
  }

  // MachineCSE may CSE instructions which write to non-allocatable physical
  // registers across MBBs. Remember if any reserved register is liveout.
  SmallSet<unsigned, 4> LiveOuts;
  for (MachineBasicBlock::const_succ_iterator SI = MBB->succ_begin(),
         SE = MBB->succ_end(); SI != SE; ++SI) {
    MachineBasicBlock *SuccMBB = *SI;
    if (SuccMBB->isLandingPad())
      continue;
    for (MachineBasicBlock::livein_iterator LI = SuccMBB->livein_begin(),
           LE = SuccMBB->livein_end(); LI != LE; ++LI) {
      unsigned LReg = *LI;
      if (!TRI->isInAllocatableClass(LReg))
        // Ignore other live-ins, e.g. those that are live into landing pads.
        LiveOuts.insert(LReg);
    }
  }

  // Loop over PhysRegDef / PhysRegUse, killing any registers that are
  // available at the end of the basic block.
  for (unsigned i = 0; i != NumRegs; ++i)
    if ((PhysRegDef[i] || PhysRegUse[i]) && !LiveOuts.count(i))
      HandlePhysRegDef(i, nullptr, Defs);
}

void MIRPrinter::convert(ModuleSlotTracker &MST,
                         yaml::MachineBasicBlock &YamlMBB,
                         const MachineBasicBlock &MBB) {
  assert(MBB.getNumber() >= 0 && "Invalid MBB number");
  YamlMBB.ID = (unsigned)MBB.getNumber();
  if (const auto *BB = MBB.getBasicBlock()) {
    if (BB->hasName()) {
      YamlMBB.Name.Value = BB->getName();
    } else {
      int Slot = MST.getLocalSlot(BB);
      if (Slot == -1)
        YamlMBB.IRBlock.Value = "<badref>";
      else
        YamlMBB.IRBlock.Value = (Twine("%ir-block.") + Twine(Slot)).str();
    }
  }
  YamlMBB.Alignment = MBB.getAlignment();
  YamlMBB.AddressTaken = MBB.hasAddressTaken();
  YamlMBB.IsLandingPad = MBB.isLandingPad();
  for (const auto *SuccMBB : MBB.successors()) {
    std::string Str;
    raw_string_ostream StrOS(Str);
    MIPrinter(StrOS, MST, RegisterMaskIds, StackObjectOperandMapping)
        .printMBBReference(*SuccMBB);
    YamlMBB.Successors.push_back(StrOS.str());
  }
  if (MBB.hasSuccessorWeights()) {
    for (auto I = MBB.succ_begin(), E = MBB.succ_end(); I != E; ++I)
      YamlMBB.SuccessorWeights.push_back(
          yaml::UnsignedValue(MBB.getSuccWeight(I)));
  }
  // Print the live in registers.
  const auto *TRI = MBB.getParent()->getSubtarget().getRegisterInfo();
  assert(TRI && "Expected target register info");
  for (auto I = MBB.livein_begin(), E = MBB.livein_end(); I != E; ++I) {
    std::string Str;
    raw_string_ostream StrOS(Str);
    printReg(*I, StrOS, TRI);
    YamlMBB.LiveIns.push_back(StrOS.str());
  }
  // Print the machine instructions.
  YamlMBB.Instructions.reserve(MBB.size());
  std::string Str;
  for (const auto &MI : MBB) {
    raw_string_ostream StrOS(Str);
    MIPrinter(StrOS, MST, RegisterMaskIds, StackObjectOperandMapping).print(MI);
    YamlMBB.Instructions.push_back(StrOS.str());
    Str.clear();
  }
}

bool LiveVariables::runOnMachineFunction(MachineFunction &mf) {
  MF = &mf;
  MRI = &mf.getRegInfo();
  TRI = MF->getTarget().getRegisterInfo();

  ReservedRegisters = TRI->getReservedRegs(mf);

  unsigned NumRegs = TRI->getNumRegs();
  PhysRegDef  = new MachineInstr*[NumRegs];
  PhysRegUse  = new MachineInstr*[NumRegs];
  PHIVarInfo = new SmallVector<unsigned, 4>[MF->getNumBlockIDs()];
  std::fill(PhysRegDef,  PhysRegDef  + NumRegs, (MachineInstr*)0);
  std::fill(PhysRegUse,  PhysRegUse  + NumRegs, (MachineInstr*)0);

  /// Get some space for a respectable number of registers.
  VirtRegInfo.resize(64);

  analyzePHINodes(mf);

  // Calculate live variable information in depth first order on the CFG of the
  // function.  This guarantees that we will see the definition of a virtual
  // register before its uses due to dominance properties of SSA (except for PHI
  // nodes, which are treated as a special case).
  MachineBasicBlock *Entry = MF->begin();
  SmallPtrSet<MachineBasicBlock*,16> Visited;

  for (df_ext_iterator<MachineBasicBlock*, SmallPtrSet<MachineBasicBlock*,16> >
         DFI = df_ext_begin(Entry, Visited), E = df_ext_end(Entry, Visited);
       DFI != E; ++DFI) {
    MachineBasicBlock *MBB = *DFI;

    // Mark live-in registers as live-in.
    for (MachineBasicBlock::const_livein_iterator II = MBB->livein_begin(),
           EE = MBB->livein_end(); II != EE; ++II) {
      assert(TargetRegisterInfo::isPhysicalRegister(*II) &&
             "Cannot have a live-in virtual register!");
      HandlePhysRegDef(*II, 0);
    }

    // Loop over all of the instructions, processing them.
    DistanceMap.clear();
    unsigned Dist = 0;
    for (MachineBasicBlock::iterator I = MBB->begin(), E = MBB->end();
         I != E; ++I) {
      MachineInstr *MI = I;
      DistanceMap.insert(std::make_pair(MI, Dist++));

      // Process all of the operands of the instruction...
      unsigned NumOperandsToProcess = MI->getNumOperands();

      // Unless it is a PHI node.  In this case, ONLY process the DEF, not any
      // of the uses.  They will be handled in other basic blocks.
      if (MI->getOpcode() == TargetInstrInfo::PHI)
        NumOperandsToProcess = 1;

      SmallVector<unsigned, 4> UseRegs;
      SmallVector<unsigned, 4> DefRegs;
      for (unsigned i = 0; i != NumOperandsToProcess; ++i) {
        const MachineOperand &MO = MI->getOperand(i);
        if (!MO.isReg() || MO.getReg() == 0)
          continue;
        unsigned MOReg = MO.getReg();
        if (MO.isUse())
          UseRegs.push_back(MOReg);
        if (MO.isDef())
          DefRegs.push_back(MOReg);
      }

      // Process all uses.
      for (unsigned i = 0, e = UseRegs.size(); i != e; ++i) {
        unsigned MOReg = UseRegs[i];
        if (TargetRegisterInfo::isVirtualRegister(MOReg))
          HandleVirtRegUse(MOReg, MBB, MI);
        else if (!ReservedRegisters[MOReg])
          HandlePhysRegUse(MOReg, MI);
      }

      // Process all defs.
      for (unsigned i = 0, e = DefRegs.size(); i != e; ++i) {
        unsigned MOReg = DefRegs[i];
        if (TargetRegisterInfo::isVirtualRegister(MOReg))
          HandleVirtRegDef(MOReg, MI);
        else if (!ReservedRegisters[MOReg])
          HandlePhysRegDef(MOReg, MI);
      }
    }

    // Handle any virtual assignments from PHI nodes which might be at the
    // bottom of this basic block.  We check all of our successor blocks to see
    // if they have PHI nodes, and if so, we simulate an assignment at the end
    // of the current block.
    if (!PHIVarInfo[MBB->getNumber()].empty()) {
      SmallVector<unsigned, 4>& VarInfoVec = PHIVarInfo[MBB->getNumber()];

      for (SmallVector<unsigned, 4>::iterator I = VarInfoVec.begin(),
             E = VarInfoVec.end(); I != E; ++I)
        // Mark it alive only in the block we are representing.
        MarkVirtRegAliveInBlock(getVarInfo(*I),MRI->getVRegDef(*I)->getParent(),
                                MBB);
    }
//.........这里部分代码省略.........

bool LiveVariables::runOnMachineFunction(MachineFunction &mf) {
  MF = &mf;
  MRI = &mf.getRegInfo();
  TRI = MF->getTarget().getRegisterInfo();

  ReservedRegisters = TRI->getReservedRegs(mf);

  unsigned NumRegs = TRI->getNumRegs();
  PhysRegDef  = new MachineInstr*[NumRegs];
  PhysRegUse  = new MachineInstr*[NumRegs];
  PHIVarInfo = new SmallVector<unsigned, 4>[MF->getNumBlockIDs()];
  std::fill(PhysRegDef,  PhysRegDef  + NumRegs, (MachineInstr*)0);
  std::fill(PhysRegUse,  PhysRegUse  + NumRegs, (MachineInstr*)0);
  PHIJoins.clear();

  // FIXME: LiveIntervals will be updated to remove its dependence on
  // LiveVariables to improve compilation time and eliminate bizarre pass
  // dependencies. Until then, we can't change much in -O0.
  if (!MRI->isSSA())
    report_fatal_error("regalloc=... not currently supported with -O0");

  analyzePHINodes(mf);

  // Calculate live variable information in depth first order on the CFG of the
  // function.  This guarantees that we will see the definition of a virtual
  // register before its uses due to dominance properties of SSA (except for PHI
  // nodes, which are treated as a special case).
  MachineBasicBlock *Entry = MF->begin();
  SmallPtrSet<MachineBasicBlock*,16> Visited;

  for (df_ext_iterator<MachineBasicBlock*, SmallPtrSet<MachineBasicBlock*,16> >
         DFI = df_ext_begin(Entry, Visited), E = df_ext_end(Entry, Visited);
       DFI != E; ++DFI) {
    MachineBasicBlock *MBB = *DFI;

    // Mark live-in registers as live-in.
    SmallVector<unsigned, 4> Defs;
    for (MachineBasicBlock::livein_iterator II = MBB->livein_begin(),
           EE = MBB->livein_end(); II != EE; ++II) {
      assert(TargetRegisterInfo::isPhysicalRegister(*II) &&
             "Cannot have a live-in virtual register!");
      HandlePhysRegDef(*II, 0, Defs);
    }

    // Loop over all of the instructions, processing them.
    DistanceMap.clear();
    unsigned Dist = 0;
    for (MachineBasicBlock::iterator I = MBB->begin(), E = MBB->end();
         I != E; ++I) {
      MachineInstr *MI = I;
      if (MI->isDebugValue())
        continue;
      DistanceMap.insert(std::make_pair(MI, Dist++));

      // Process all of the operands of the instruction...
      unsigned NumOperandsToProcess = MI->getNumOperands();

      // Unless it is a PHI node.  In this case, ONLY process the DEF, not any
      // of the uses.  They will be handled in other basic blocks.
      if (MI->isPHI())
        NumOperandsToProcess = 1;

      // Clear kill and dead markers. LV will recompute them.
      SmallVector<unsigned, 4> UseRegs;
      SmallVector<unsigned, 4> DefRegs;
      SmallVector<unsigned, 1> RegMasks;
      for (unsigned i = 0; i != NumOperandsToProcess; ++i) {
        MachineOperand &MO = MI->getOperand(i);
        if (MO.isRegMask()) {
          RegMasks.push_back(i);
          continue;
        }
        if (!MO.isReg() || MO.getReg() == 0)
          continue;
        unsigned MOReg = MO.getReg();
        if (MO.isUse()) {
          MO.setIsKill(false);
          UseRegs.push_back(MOReg);
        } else /*MO.isDef()*/ {
          MO.setIsDead(false);
          DefRegs.push_back(MOReg);
        }
      }

      // Process all uses.
      for (unsigned i = 0, e = UseRegs.size(); i != e; ++i) {
        unsigned MOReg = UseRegs[i];
        if (TargetRegisterInfo::isVirtualRegister(MOReg))
          HandleVirtRegUse(MOReg, MBB, MI);
        else if (!ReservedRegisters[MOReg])
          HandlePhysRegUse(MOReg, MI);
      }

      // Process all masked registers. (Call clobbers).
      for (unsigned i = 0, e = RegMasks.size(); i != e; ++i)
        HandleRegMask(MI->getOperand(RegMasks[i]));

      // Process all defs.
      for (unsigned i = 0, e = DefRegs.size(); i != e; ++i) {
        unsigned MOReg = DefRegs[i];
//.........这里部分代码省略.........

/// HoistRegionPostRA - Walk the specified region of the CFG and hoist loop
/// invariants out to the preheader.
void MachineLICM::HoistRegionPostRA() {
  unsigned NumRegs = TRI->getNumRegs();
  unsigned *PhysRegDefs = new unsigned[NumRegs];
  std::fill(PhysRegDefs, PhysRegDefs + NumRegs, 0);

  SmallVector<CandidateInfo, 32> Candidates;
  SmallSet<int, 32> StoredFIs;

  // Walk the entire region, count number of defs for each register, and
  // collect potential LICM candidates.
  const std::vector<MachineBasicBlock*> Blocks = CurLoop->getBlocks();
  for (unsigned i = 0, e = Blocks.size(); i != e; ++i) {
    MachineBasicBlock *BB = Blocks[i];
    // Conservatively treat live-in's as an external def.
    // FIXME: That means a reload that're reused in successor block(s) will not
    // be LICM'ed.
    for (MachineBasicBlock::livein_iterator I = BB->livein_begin(),
           E = BB->livein_end(); I != E; ++I) {
      unsigned Reg = *I;
      ++PhysRegDefs[Reg];
      for (const unsigned *AS = TRI->getAliasSet(Reg); *AS; ++AS)
        ++PhysRegDefs[*AS];
    }

    for (MachineBasicBlock::iterator
           MII = BB->begin(), E = BB->end(); MII != E; ++MII) {
      MachineInstr *MI = &*MII;
      ProcessMI(MI, PhysRegDefs, StoredFIs, Candidates);
    }
  }

  // Now evaluate whether the potential candidates qualify.
  // 1. Check if the candidate defined register is defined by another
  //    instruction in the loop.
  // 2. If the candidate is a load from stack slot (always true for now),
  //    check if the slot is stored anywhere in the loop.
  for (unsigned i = 0, e = Candidates.size(); i != e; ++i) {
    if (Candidates[i].FI != INT_MIN &&
        StoredFIs.count(Candidates[i].FI))
      continue;

    if (PhysRegDefs[Candidates[i].Def] == 1) {
      bool Safe = true;
      MachineInstr *MI = Candidates[i].MI;
      for (unsigned j = 0, ee = MI->getNumOperands(); j != ee; ++j) {
        const MachineOperand &MO = MI->getOperand(j);
        if (!MO.isReg() || MO.isDef() || !MO.getReg())
          continue;
        if (PhysRegDefs[MO.getReg()]) {
          // If it's using a non-loop-invariant register, then it's obviously
          // not safe to hoist.
          Safe = false;
          break;
        }
      }
      if (Safe)
        HoistPostRA(MI, Candidates[i].Def);
    }
  }

  delete[] PhysRegDefs;
}

void MIPrinter::print(const MachineBasicBlock &MBB) {
  assert(MBB.getNumber() >= 0 && "Invalid MBB number");
  OS << "bb." << MBB.getNumber();
  bool HasAttributes = false;
  if (const auto *BB = MBB.getBasicBlock()) {
    if (BB->hasName()) {
      OS << "." << BB->getName();
    } else {
      HasAttributes = true;
      OS << " (";
      int Slot = MST.getLocalSlot(BB);
      if (Slot == -1)
        OS << "<ir-block badref>";
      else
        OS << (Twine("%ir-block.") + Twine(Slot)).str();
    }
  }
  if (MBB.hasAddressTaken()) {
    OS << (HasAttributes ? ", " : " (");
    OS << "address-taken";
    HasAttributes = true;
  }
  if (MBB.isLandingPad()) {
    OS << (HasAttributes ? ", " : " (");
    OS << "landing-pad";
    HasAttributes = true;
  }
  if (MBB.getAlignment()) {
    OS << (HasAttributes ? ", " : " (");
    OS << "align " << MBB.getAlignment();
    HasAttributes = true;
  }
  if (HasAttributes)
    OS << ")";
  OS << ":\n";

  bool HasLineAttributes = false;
  // Print the successors
  if (!MBB.succ_empty()) {
    OS.indent(2) << "successors: ";
    for (auto I = MBB.succ_begin(), E = MBB.succ_end(); I != E; ++I) {
      if (I != MBB.succ_begin())
        OS << ", ";
      printMBBReference(**I);
      if (MBB.hasSuccessorWeights())
        OS << '(' << MBB.getSuccWeight(I) << ')';
    }
    OS << "\n";
    HasLineAttributes = true;
  }

  // Print the live in registers.
  const auto *TRI = MBB.getParent()->getSubtarget().getRegisterInfo();
  assert(TRI && "Expected target register info");
  if (!MBB.livein_empty()) {
    OS.indent(2) << "liveins: ";
    for (auto I = MBB.livein_begin(), E = MBB.livein_end(); I != E; ++I) {
      if (I != MBB.livein_begin())
        OS << ", ";
      printReg(*I, OS, TRI);
    }
    OS << "\n";
    HasLineAttributes = true;
  }

  if (HasLineAttributes)
    OS << "\n";
  bool IsInBundle = false;
  for (auto I = MBB.instr_begin(), E = MBB.instr_end(); I != E; ++I) {
    const MachineInstr &MI = *I;
    if (IsInBundle && !MI.isInsideBundle()) {
      OS.indent(2) << "}\n";
      IsInBundle = false;
    }
    OS.indent(IsInBundle ? 4 : 2);
    print(MI);
    if (!IsInBundle && MI.getFlag(MachineInstr::BundledSucc)) {
      OS << " {";
      IsInBundle = true;
    }
    OS << "\n";
  }
  if (IsInBundle)
    OS.indent(2) << "}\n";
}