C++ TRACK::SetLayer方法代码示例

void PNS_KICAD_IFACE::AddItem( PNS::ITEM* aItem )
{
    BOARD_CONNECTED_ITEM* newBI = NULL;

    switch( aItem->Kind() )
    {
    case PNS::ITEM::SEGMENT_T:
    {
        PNS::SEGMENT* seg = static_cast<PNS::SEGMENT*>( aItem );
        TRACK* track = new TRACK( m_board );
        const SEG& s = seg->Seg();
        track->SetStart( wxPoint( s.A.x, s.A.y ) );
        track->SetEnd( wxPoint( s.B.x, s.B.y ) );
        track->SetWidth( seg->Width() );
        track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
        track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
        newBI = track;
        break;
    }

    case PNS::ITEM::VIA_T:
    {
        VIA* via_board = new VIA( m_board );
        PNS::VIA* via = static_cast<PNS::VIA*>( aItem );
        via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
        via_board->SetWidth( via->Diameter() );
        via_board->SetDrill( via->Drill() );
        via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
        via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
        via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
                                 ToLAYER_ID( via->Layers().End() ) );
        newBI = via_board;
        break;
    }

    default:
        break;
    }

    if( newBI )
    {
        aItem->SetParent( newBI );
        newBI->ClearFlags();

        m_commit->Add( newBI );
    }
}

TRACK* SPECCTRA_DB::makeTRACK( PATH* aPath, int aPointIndex, int aNetcode ) throw( IO_ERROR )
{
    int layerNdx = findLayerName( aPath->layer_id );

    if( layerNdx == -1 )
    {
        wxString layerName = FROM_UTF8( aPath->layer_id.c_str() );
        THROW_IO_ERROR( wxString::Format( _("Session file uses invalid layer id \"%s\""),
                                          GetChars( layerName ) ) );
    }

    TRACK* track = new TRACK( sessionBoard );

    track->SetStart( mapPt( aPath->points[aPointIndex+0], routeResolution ) );
    track->SetEnd( mapPt( aPath->points[aPointIndex+1], routeResolution ) );
    track->SetLayer( pcbLayer2kicad[layerNdx] );
    track->SetWidth( scale( aPath->aperture_width, routeResolution ) );
    track->SetNetCode( aNetcode );

    return track;
}

bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
    unsigned    itmp;

    if( aTrack == NULL )
    {
        if( GetActiveLayer() != GetScreen()->m_Route_Layer_TOP )
            SetActiveLayer( GetScreen()->m_Route_Layer_TOP );
        else
            SetActiveLayer( GetScreen()->m_Route_Layer_BOTTOM );

        UpdateStatusBar();
        return true;
    }

    // Avoid more than one via on the current location:
    if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
                                      g_CurrentTrackSegment->GetLayer() ) )
        return false;

    for( TRACK* segm = g_FirstTrackSegment;  segm;  segm = segm->Next() )
    {
        if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
            return false;
    }

    // Is the current segment Ok (no DRC error) ?
    if( g_Drc_On )
    {
        if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
            // DRC error, the change layer is not made
            return false;

        // Handle 2 segments.
        if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
        {
            if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
                return false;
        }
    }

    /* Save current state before placing a via.
     * If the via cannot be placed this current state will be reused
     */
    itmp = g_CurrentTrackList.GetCount();
    Begin_Route( g_CurrentTrackSegment, DC );

    m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

    // create the via
    VIA* via = new VIA( GetBoard() );
    via->SetFlags( IS_NEW );
    via->SetViaType( GetDesignSettings().m_CurrentViaType );
    via->SetNetCode( GetBoard()->GetHighLightNetCode() );
    via->SetPosition( g_CurrentTrackSegment->GetEnd() );

    // for microvias, the size and hole will be changed later.
    via->SetWidth( GetDesignSettings().GetCurrentViaSize());
    via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );

    // Usual via is from copper to component.
    // layer pair is B_Cu and F_Cu.
    via->SetLayerPair( B_Cu, F_Cu );

    LAYER_ID first_layer = GetActiveLayer();
    LAYER_ID last_layer;

    // prepare switch to new active layer:
    if( first_layer != GetScreen()->m_Route_Layer_TOP )
        last_layer = GetScreen()->m_Route_Layer_TOP;
    else
        last_layer = GetScreen()->m_Route_Layer_BOTTOM;

    // Adjust the actual via layer pair
    switch( via->GetViaType() )
    {
    case VIA_BLIND_BURIED:
        via->SetLayerPair( first_layer, last_layer );
        break;

    case VIA_MICROVIA:  // from external to the near neighbor inner layer
        {
            LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );

            if( first_layer == B_Cu )
                last_layer = last_inner_layer;
            else if( first_layer == F_Cu )
                last_layer = In1_Cu;
            else if( first_layer == last_inner_layer )
                last_layer = B_Cu;
            else if( first_layer == In1_Cu )
                last_layer = F_Cu;
            // else error: will be removed later
            via->SetLayerPair( first_layer, last_layer );

            // Update diameter and hole size, which where set previously
            // for normal vias
            NETINFO_ITEM* net = via->GetNet();
            via->SetWidth( net->GetMicroViaSize() );
            via->SetDrill( net->GetMicroViaDrillSize() );
//.........这里部分代码省略.........

void PNS_ROUTER::CommitRouting( PNS_NODE* aNode )
{
    PNS_NODE::ITEM_VECTOR removed, added;

    aNode->GetUpdatedItems( removed, added );

    for( unsigned int i = 0; i < removed.size(); i++ )
    {
        BOARD_CONNECTED_ITEM* parent = removed[i]->Parent();

        if( parent )
        {
            m_view->Remove( parent );
            m_board->Remove( parent );
            m_undoBuffer.PushItem( ITEM_PICKER( parent, UR_DELETED ) );
        }
    }

    for( PNS_ITEM* item : added )
    {
        BOARD_CONNECTED_ITEM* newBI = NULL;

        switch( item->Kind() )
        {
        case PNS_ITEM::SEGMENT:
        {
            PNS_SEGMENT* seg = static_cast<PNS_SEGMENT*>( item );
            TRACK* track = new TRACK( m_board );
            const SEG& s = seg->Seg();

            track->SetStart( wxPoint( s.A.x, s.A.y ) );
            track->SetEnd( wxPoint( s.B.x, s.B.y ) );
            track->SetWidth( seg->Width() );
            track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
            track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
            newBI = track;
            break;
        }

        case PNS_ITEM::VIA:
        {
            VIA* via_board = new VIA( m_board );
            PNS_VIA* via = static_cast<PNS_VIA*>( item );
            via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
            via_board->SetWidth( via->Diameter() );
            via_board->SetDrill( via->Drill() );
            via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
            via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
            via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
                                     ToLAYER_ID( via->Layers().End() ) );
            newBI = via_board;
            break;
        }

        default:
            break;
        }

        if( newBI )
        {
            item->SetParent( newBI );
            newBI->ClearFlags();
            m_view->Add( newBI );
            m_board->Add( newBI );
            m_undoBuffer.PushItem( ITEM_PICKER( newBI, UR_NEW ) );
            newBI->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
        }
    }

    m_board->GetRatsnest()->Recalculate();
    m_world->Commit( aNode );
}

//.........这里部分代码省略.........
    bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;

    for( auto item : m_items )
    {
        m_commit.Modify( item );

        switch( item->Type() )
        {
            case PCB_TRACE_T:
            {
                wxASSERT( m_tracks );
                TRACK* t = static_cast<TRACK*>( item );

                if( !m_trackStartX.IsIndeterminate() )
                    t->SetStart( wxPoint( m_trackStartX.GetValue(), t->GetStart().y ) );

                if( !m_trackStartY.IsIndeterminate() )
                    t->SetStart( wxPoint( t->GetStart().x, m_trackStartY.GetValue() ) );

                if( !m_trackEndX.IsIndeterminate() )
                    t->SetEnd( wxPoint( m_trackEndX.GetValue(), t->GetEnd().y ) );

                if( !m_trackEndY.IsIndeterminate() )
                    t->SetEnd( wxPoint( t->GetEnd().x, m_trackEndY.GetValue() ) );

                if( m_trackNetclass->IsChecked() )
                    t->SetWidth( t->GetNetClass()->GetTrackWidth() );
                else if( !m_trackWidth.IsIndeterminate() )
                    t->SetWidth( m_trackWidth.GetValue() );

                LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();

                if( layer != UNDEFINED_LAYER )
                    t->SetLayer( (PCB_LAYER_ID) layer );

                if( changeLock )
                    t->SetLocked( setLock );

                if ( !m_netSelector->IsIndeterminate() )
                    t->SetNetCode( m_netSelector->GetSelectedNetcode() );

                break;
            }

            case PCB_VIA_T:
            {
                wxASSERT( m_vias );
                VIA* v = static_cast<VIA*>( item );

                if( !m_viaX.IsIndeterminate() )
                    v->SetPosition( wxPoint( m_viaX.GetValue(), v->GetPosition().y ) );

                if( !m_viaY.IsIndeterminate() )
                    v->SetPosition( wxPoint( v->GetPosition().x, m_viaY.GetValue() ) );

                if( m_ViaTypeChoice->GetSelection() != 3)
                {
                    switch( m_ViaTypeChoice->GetSelection() )
                    {
                    default:
                    case 0: v->SetViaType( VIA_THROUGH ); v->SanitizeLayers(); break;
                    case 1: v->SetViaType( VIA_MICROVIA );                     break;
                    case 2: v->SetViaType( VIA_BLIND_BURIED );                 break;
                    }
                }

bool DIALOG_TRACK_VIA_PROPERTIES::Apply()
{
    if( !check() )
        return false;

    for( int i = 0; i < m_items.Size(); ++i )
    {
        BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );

        switch( item->Type() )
        {
            case PCB_TRACE_T:
            {
                assert( m_tracks );
                TRACK* t = static_cast<TRACK*>( item );

                if( m_trackStartX.Valid() || m_trackStartY.Valid() )
                {
                    wxPoint start = t->GetStart();

                    if( m_trackStartX.Valid() )
                        start.x = m_trackStartX.GetValue();

                    if( m_trackStartY.Valid() )
                        start.y = m_trackStartY.GetValue();

                    t->SetStart( start );
                }

                if( m_trackEndX.Valid() || m_trackEndY.Valid() )
                {
                    wxPoint end = t->GetEnd();

                    if( m_trackEndX.Valid() )
                        end.x = m_trackEndX.GetValue();

                    if( m_trackEndY.Valid() )
                        end.y = m_trackEndY.GetValue();

                    t->SetEnd( end );
                }

                if( m_trackNetclass->IsChecked() )
                {
                    t->SetWidth( t->GetNetClass()->GetTrackWidth() );
                }
                else if( m_trackWidth.Valid() )
                {
                    t->SetWidth( m_trackWidth.GetValue() );
                }

                LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();

                if( layer != UNDEFINED_LAYER )
                    t->SetLayer( (LAYER_ID) layer );

                break;
            }

            case PCB_VIA_T:
            {
                assert( m_vias );

                VIA* v = static_cast<VIA*>( item );

                if( m_viaX.Valid() || m_viaY.Valid() )
                {
                    wxPoint pos = v->GetPosition();

                    if( m_viaX.Valid() )
                        pos.x = m_viaX.GetValue();

                    if( m_viaY.Valid() )
                        pos.y = m_viaY.GetValue();

                    v->SetPosition( pos );
                }

                if( m_viaNetclass->IsChecked() )
                {
                    v->SetWidth( v->GetNetClass()->GetViaDiameter() );
                    v->SetDrill( v->GetNetClass()->GetViaDrill() );
                }
                else
                {
                    if( m_viaDiameter.Valid() )
                        v->SetWidth( m_viaDiameter.GetValue() );

                    if( m_viaDrill.Valid() )
                        v->SetDrill( m_viaDrill.GetValue() );
                }

                break;
            }

            default:
                assert( false );
                break;
        }
    }
//.........这里部分代码省略.........