当前位置: 首页>>代码示例>>C++>>正文


C++ TRACK::Clone方法代码示例

本文整理汇总了C++中TRACK::Clone方法的典型用法代码示例。如果您正苦于以下问题:C++ TRACK::Clone方法的具体用法?C++ TRACK::Clone怎么用?C++ TRACK::Clone使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在TRACK的用法示例。


在下文中一共展示了TRACK::Clone方法的3个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: StartMoveOneNodeOrSegment

void PCB_EDIT_FRAME::StartMoveOneNodeOrSegment( TRACK* aTrack, wxDC* aDC, int aCommand )
{
    if( !aTrack )
        return;

    EraseDragList();

    // Change highlighted net: the new one will be highlighted
    GetBoard()->PushHighLight();

    if( GetBoard()->IsHighLightNetON() )
        HighLight( aDC );

    PosInit = GetCrossHairPosition();

    if( aTrack->Type() == PCB_VIA_T )
    {
        aTrack->SetFlags( IS_DRAGGED | STARTPOINT | ENDPOINT );
        AddSegmentToDragList( aTrack->GetFlags(), aTrack );

        if( aCommand != ID_POPUP_PCB_MOVE_TRACK_SEGMENT )
        {
            Collect_TrackSegmentsToDrag( GetBoard(), aTrack->GetStart(),
                                         aTrack->GetLayerSet(),
                                         aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
        }

        PosInit = aTrack->GetStart();
    }
    else
    {
        STATUS_FLAGS diag = aTrack->IsPointOnEnds( GetCrossHairPosition(), -1 );
        wxPoint pos;

        switch( aCommand )
        {
        case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:   // Move segment
            aTrack->SetFlags( IS_DRAGGED | ENDPOINT | STARTPOINT );
            AddSegmentToDragList( aTrack->GetFlags(), aTrack );
            break;

        case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:   // drag a segment
            pos = aTrack->GetStart();
            Collect_TrackSegmentsToDrag( GetBoard(), pos, aTrack->GetLayerSet(),
                                         aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
            pos = aTrack->GetEnd();
            aTrack->SetFlags( IS_DRAGGED | ENDPOINT | STARTPOINT );
            Collect_TrackSegmentsToDrag( GetBoard(), pos, aTrack->GetLayerSet(),
                                         aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
            break;

        case ID_POPUP_PCB_MOVE_TRACK_NODE:  // Drag via or move node
            pos = (diag & STARTPOINT) ? aTrack->GetStart() : aTrack->GetEnd();
            Collect_TrackSegmentsToDrag( GetBoard(), pos, aTrack->GetLayerSet(),
                                         aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
            PosInit = pos;
            break;
        }

        aTrack->SetFlags( IS_DRAGGED );
    }

    // Prepare the Undo command
    ITEM_PICKER picker( aTrack, UR_CHANGED );
    picker.SetLink( aTrack->Clone() );
    s_ItemsListPicker.PushItem( picker );

    for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
    {
        TRACK* draggedtrack = g_DragSegmentList[ii].m_Track;
        picker.SetItem( draggedtrack );
        picker.SetLink( draggedtrack->Clone() );
        s_ItemsListPicker.PushItem( picker );
        draggedtrack = (TRACK*) picker.GetLink();
        draggedtrack->SetStatus( 0 );
        draggedtrack->ClearFlags();
    }

    s_LastPos = PosInit;
    m_canvas->SetMouseCapture( Show_MoveNode, Abort_MoveTrack );

    GetBoard()->SetHighLightNet( aTrack->GetNetCode() );
    GetBoard()->HighLightON();

    GetBoard()->DrawHighLight( m_canvas, aDC, GetBoard()->GetHighLightNetCode() );
    m_canvas->CallMouseCapture( aDC, wxDefaultPosition, true );

    UndrawAndMarkSegmentsToDrag( m_canvas, aDC );
}
开发者ID:LDavis4559,项目名称:kicad-source-mirror,代码行数:89,代码来源:move_or_drag_track.cpp

示例2: Start_DragTrackSegmentAndKeepSlope


//.........这里部分代码省略.........
            error = true;

        TrackToStartPoint->SetState( BUSY, false );
    }

    if( ( track->end == NULL ) || ( track->end->Type() == PCB_TRACE_T ) )
        TrackToEndPoint = track->GetTrack( GetBoard()->m_Track, NULL, ENDPOINT_END, true, false );

    //  Test if more than one segment is connected to this point
    if( TrackToEndPoint )
    {
        TrackToEndPoint->SetState( BUSY, true );

        if( (TrackToEndPoint->Type() == PCB_VIA_T)
           || track->GetTrack( GetBoard()->m_Track, NULL, ENDPOINT_END, true, false ) )
            error = true;

        TrackToEndPoint->SetState( BUSY, false );
    }

    if( error )
    {
        DisplayError( this,
                      _( "Unable to drag this segment: too many segments connected" ) );
        return;
    }

    if( !TrackToStartPoint || ( TrackToStartPoint->Type() != PCB_TRACE_T ) )
        s_StartSegmentPresent = false;

    if( !TrackToEndPoint || ( TrackToEndPoint->Type() != PCB_TRACE_T ) )
        s_EndSegmentPresent = false;

    // Change high light net: the new one will be highlighted
    GetBoard()->PushHighLight();

    if( GetBoard()->IsHighLightNetON() )
        HighLight( DC );

    EraseDragList();

    track->SetFlags( IS_DRAGGED );

    if( TrackToStartPoint )
    {
        STATUS_FLAGS flag = STARTPOINT;

        if( track->GetStart() != TrackToStartPoint->GetStart() )
            flag = ENDPOINT;

        AddSegmentToDragList( flag, TrackToStartPoint );
        track->SetFlags( STARTPOINT );
    }

    if( TrackToEndPoint )
    {
        STATUS_FLAGS flag = STARTPOINT;

        if( track->GetEnd() != TrackToEndPoint->GetStart() )
            flag = ENDPOINT;

        AddSegmentToDragList( flag, TrackToEndPoint );
        track->SetFlags( ENDPOINT );
    }

    AddSegmentToDragList( track->GetFlags(), track );

    UndrawAndMarkSegmentsToDrag( m_canvas, DC );


    PosInit   = GetCrossHairPosition();
    s_LastPos = GetCrossHairPosition();
    m_canvas->SetMouseCapture( Show_Drag_Track_Segment_With_Cte_Slope, Abort_MoveTrack );

    GetBoard()->SetHighLightNet( track->GetNetCode() );
    GetBoard()->HighLightON();
    GetBoard()->DrawHighLight( m_canvas, DC, GetBoard()->GetHighLightNetCode() );

    // Prepare the Undo command
    ITEM_PICKER picker( NULL, UR_CHANGED );

    for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
    {
        TRACK* draggedtrack = g_DragSegmentList[ii].m_Track;
        picker.SetItem( draggedtrack);
        picker.SetLink ( draggedtrack->Clone() );
        s_ItemsListPicker.PushItem( picker );
        draggedtrack = (TRACK*) picker.GetLink();
        draggedtrack->SetStatus( 0 );
        draggedtrack->ClearFlags();
    }

    if( !InitialiseDragParameters() )
    {
        DisplayError( this, _( "Unable to drag this segment: two collinear segments" ) );
        m_canvas->SetMouseCaptureCallback( NULL );
        Abort_MoveTrack( m_canvas, DC );
        return;
    }
}
开发者ID:LDavis4559,项目名称:kicad-source-mirror,代码行数:101,代码来源:move_or_drag_track.cpp

示例3: Other_Layer_Route


//.........这里部分代码省略.........
    // Adjust the actual via layer pair
    switch( via->GetViaType() )
    {
    case VIA_BLIND_BURIED:
        via->SetLayerPair( first_layer, last_layer );
        break;

    case VIA_MICROVIA:  // from external to the near neighbor inner layer
        {
            LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );

            if( first_layer == B_Cu )
                last_layer = last_inner_layer;
            else if( first_layer == F_Cu )
                last_layer = In1_Cu;
            else if( first_layer == last_inner_layer )
                last_layer = B_Cu;
            else if( first_layer == In1_Cu )
                last_layer = F_Cu;
            // else error: will be removed later
            via->SetLayerPair( first_layer, last_layer );

            // Update diameter and hole size, which where set previously
            // for normal vias
            NETINFO_ITEM* net = via->GetNet();
            via->SetWidth( net->GetMicroViaSize() );
            via->SetDrill( net->GetMicroViaDrillSize() );
        }
        break;

    default:
        break;
    }

    if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
    {
        // DRC fault: the Via cannot be placed here ...
        delete via;

        m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

        // delete the track(s) added in Begin_Route()
        while( g_CurrentTrackList.GetCount() > itmp )
        {
            Delete_Segment( DC, g_CurrentTrackSegment );
        }

         SetCurItem( g_CurrentTrackSegment, false );

        // Refresh DRC diag, erased by previous calls
        if( m_drc->GetCurrentMarker() )
            SetMsgPanel( m_drc->GetCurrentMarker() );

        return false;
    }

    SetActiveLayer( last_layer );

    TRACK*  lastNonVia = g_CurrentTrackSegment;

    /* A new via was created. It was Ok.
     */
    g_CurrentTrackList.PushBack( via );

    /* The via is now in linked list and we need a new track segment
     * after the via, starting at via location.
     * it will become the new current segment (from via to the mouse cursor)
     */

    TRACK* track = (TRACK*)lastNonVia->Clone();

    /* the above creates a new segment from the last entered segment, with the
     * current width, flags, netcode, etc... values.
     * layer, start and end point are not correct,
     * and will be modified next
     */

    // set the layer to the new value
    track->SetLayer( GetActiveLayer() );

    /* the start point is the via position and the end point is the cursor
     * which also is on the via (will change when moving mouse)
     */
    track->SetEnd( via->GetStart() );
    track->SetStart( via->GetStart() );

    g_CurrentTrackList.PushBack( track );

    if( g_TwoSegmentTrackBuild )
    {
        // Create a second segment (we must have 2 track segments to adjust)
        g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
    }

    m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
    SetMsgPanel( via );
    UpdateStatusBar();

    return true;
}
开发者ID:AlexanderBrevig,项目名称:kicad-source-mirror,代码行数:101,代码来源:editrack-part2.cpp


注:本文中的TRACK::Clone方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。