本文整理汇总了C++中Dynamixel::WriteByte方法的典型用法代码示例。如果您正苦于以下问题：C++ Dynamixel::WriteByte方法的具体用法？C++ Dynamixel::WriteByte怎么用？C++ Dynamixel::WriteByte使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Dynamixel的用法示例。
在下文中一共展示了Dynamixel::WriteByte方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: Broadcast
void Broadcast()
{
unsigned char param[Amount*(1+4)];
for(int i = 0; i < Amount; i++)
{
DXL.WriteByte(Id[i], P_TORQUE_ENABLE, 1, 0);
}
int goal=0;
int GoalPos;
while(1)
{
printf( "Press any key to continue!(press ESC to quit)\n" );
if(_getch() == 0x1b)
break;
do
{
// Make syncwrite packet
for(int i = 0; i < Amount; i++)
{
printf("for id=%d,input goalpos\n",Id[i]);
scanf("%d",&goal);
GoalPos = (int)(goal);
param[i*(1+4)+0] = (unsigned char)Id[i];
param[i*(1+4)+1] = DXL_LOBYTE(DXL_LOWORD(GoalPos));
param[i*(1+4)+2] = DXL_HIBYTE(DXL_LOWORD(GoalPos));
param[i*(1+4)+3] = DXL_LOBYTE(DXL_HIWORD(GoalPos));
param[i*(1+4)+4] = DXL_HIBYTE(DXL_HIWORD(GoalPos));
}
printf("%d\n", GoalPos);
int result = DXL.SyncWrite(P_GOAL_POSITION_LL, 4, param, Amount*(1+4));
if( result != COMM_RXSUCCESS )
{
printf("fail to open serial port!\n");//PrintCommStatus(result);
break;
}
usleep(CONTROL_PERIOD*1000);
}while(1);
}
}示例2: Write
void Write(int id, int addr, long value, int len)
{
int result = COMM_TXFAIL, error = 0;
if(len == 1)
result = DXL.WriteByte(id, addr, (int)value, &error);
else if(len == 2)
result = DXL.WriteWord(id, addr, (int)value, &error);
else if(len == 4)
result = DXL.WriteDWord(id, addr, value, &error);
if(result != COMM_RXSUCCESS)
{
fprintf(stderr, "\n Fail to write! \n\n");
return;
}
if(error != 0)
PrintErrorCode(error);
fprintf(stderr, "\n Success to write! \n\n");
}示例3: main
int main()
{
int id[NUM_ACTUATOR];
float phase[NUM_ACTUATOR];
float theta = 0;
int AmpPos = 150000;
int GoalPos;
int i;
int result;
// Initialize id and phase
for( i=0; i < NUM_ACTUATOR; i++ )
{
id[i] = i+1;
phase[i] = 2*PI * (float)i / (float)NUM_ACTUATOR;
}
Dynamixel DXL("/dev/ttyUSB0");
// Open device
if( DXL.Connect() == 0 )
{
printf( "Failed to open USB2Dynamixel!\n" );
printf( "Press any key to terminate...\n" );
_getch();
return 0;
}
else
printf( "Succeed to open USB2Dynamixel!\n" );
if(DXL.SetBaudrate(DEFAULT_BAUDNUM) == true)
{
printf( "Succeed to change the baudrate!\n" );
}
else
{
printf( "Failed to change the baudrate!\n" );
printf( "Press any key to terminate...\n" );
_getch();
return 0;
}
unsigned char param[NUM_ACTUATOR*(1+4)];
DXL.WriteByte(1, P_TORQUE_ENABLE, 1, 0);
DXL.WriteByte(2, P_TORQUE_ENABLE, 1, 0);
while(1)
{
printf( "Press any key to continue!(press ESC to quit)\n" );
if(_getch() == 0x1b)
break;
theta = 0;
do
{
// Make syncwrite packet
for(i = 0; i < NUM_ACTUATOR; i++)
{
GoalPos = (int)((sin(theta+phase[i])) * (double)AmpPos);
param[i*(1+4)+0] = (unsigned char)id[i];
param[i*(1+4)+1] = DXL_LOBYTE(DXL_LOWORD(GoalPos));
param[i*(1+4)+2] = DXL_HIBYTE(DXL_LOWORD(GoalPos));
param[i*(1+4)+3] = DXL_LOBYTE(DXL_HIWORD(GoalPos));
param[i*(1+4)+4] = DXL_HIBYTE(DXL_HIWORD(GoalPos));
}
printf("%d\n", GoalPos);
result = DXL.SyncWrite(P_GOAL_POSITION_LL, 4, param, NUM_ACTUATOR*(1+4));
if( result != COMM_RXSUCCESS )
{
PrintCommStatus(result);
break;
}
theta += STEP_THETA;
usleep(CONTROL_PERIOD*1000);
}while(theta < 2*PI);
}
DXL.Disconnect();
printf( "Press any key to terminate...\n" );
_getch();
return 0;
}示例4: main
int main()
{
int PresentPos = 0;
int PresentVel = 0;
int index = 0, result = COMM_TXFAIL, error = 0, Moving = 1;
int GoalPos[2] = {-125700, 125700};
int GoalVel[2] = {-8000, 8000};
Dynamixel DXL("/dev/ttyUSB0");
// Open device
if( DXL.Connect() == 0 )
{
printf( "Failed to open USB2Dynamixel!\n" );
printf( "Press any key to terminate...\n" );
_getch();
return 0;
}
else
printf( "Succeed to open USB2Dynamixel!\n" );
if(DXL.SetBaudrate(DEFAULT_BAUDNUM) == true)
{
printf( "Succeed to change the baudrate!\n" );
}
else
{
printf( "Failed to change the baudrate!\n" );
printf( "Press any key to terminate...\n" );
_getch();
return 0;
}
result = DXL.WriteByte(DEFAULT_ID, P_TORQUE_ENABLE, 1, &error);
if(result == COMM_RXSUCCESS)
{
PrintErrorCode(error);
}
else
PrintCommStatus(result);
while(1)
{
printf("Definir Velocidad (-8000,8000) \r\n");
cin>>GoalVel[0];
printf( "Presione Enter para continuar!(presione ESC y Enter para salir)\n" );
if(_getch() == 0x1b)
break;
// Write goal position
//DXL.WriteDWord( DEFAULT_ID, P_GOAL_POSITION_LL, GoalPos[index], &error);
// Write goal Speed
result = DXL.WriteDWord( DEFAULT_ID, P_GOAL_VELOCITY_LL, GoalVel[index], &error);
if(result == COMM_RXSUCCESS)
{
PrintErrorCode(error);
}
else
PrintCommStatus(result);
// Change goal position
/* for(int i=0;i<1;i++)
{
// Read present position
//result = DXL.ReadDWord(DEFAULT_ID, P_PRESENT_POSITION_LL, (long*) &PresentPos, &error);
// Read present Velocity
result = DXL.ReadDWord(DEFAULT_ID, P_PRESENT_VELOCITY_LL, (long*) &PresentVel, &error);
if( result == COMM_RXSUCCESS )
{
printf( "%d %d\n", GoalVel[index], PresentVel );
PrintErrorCode(error);
}
else
{
PrintCommStatus(result);
break;
}
}//while(Moving == 1);*/
// Change goal position
}
// Close device
DXL.Disconnect();
printf( "Press Enter key to terminate...\n" );
_getch();
return 0;
}