本文整理匯總了C#中OpenSim.Region.Framework.Scenes.SceneObjectPart.UpdateShape方法的典型用法代碼示例。如果您正苦於以下問題：C# SceneObjectPart.UpdateShape方法的具體用法？C# SceneObjectPart.UpdateShape怎麽用？C# SceneObjectPart.UpdateShape使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類OpenSim.Region.Framework.Scenes.SceneObjectPart的用法示例。
在下文中一共展示了SceneObjectPart.UpdateShape方法的4個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C#代碼示例。
示例1: SetPrimitiveShapeParams
//.........這裏部分代碼省略.........
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
tempFloat = (float)(100.0d * topshear.x);
shapeBlock.PathShearX = (byte)tempFloat;
tempFloat = (float)(100.0d * topshear.y);
shapeBlock.PathShearY = (byte)tempFloat;
if (profilecut.x < 0f)
{
profilecut.x = 0f;
}
if (profilecut.x > 1f)
{
profilecut.x = 1f;
}
if (profilecut.y < 0f)
{
profilecut.y = 0f;
}
if (profilecut.y > 1f)
{
profilecut.y = 1f;
}
if (profilecut.y - profilecut.x < 0.05f)
{
profilecut.x = profilecut.y - 0.05f;
if (profilecut.x < 0.0f)
{
profilecut.x = 0.0f;
profilecut.y = 0.05f;
}
}
shapeBlock.ProfileBegin = (ushort)(50000 * profilecut.x);
shapeBlock.ProfileEnd = (ushort)(50000 * (1 - profilecut.y));
if (taper_a.x < -1f)
{
taper_a.x = -1f;
}
if (taper_a.x > 1f)
{
taper_a.x = 1f;
}
if (taper_a.y < -1f)
{
taper_a.y = -1f;
}
if (taper_a.y > 1f)
{
taper_a.y = 1f;
}
tempFloat = (float)(100.0d * taper_a.x);
shapeBlock.PathTaperX = (sbyte)tempFloat;
tempFloat = (float)(100.0d * taper_a.y);
shapeBlock.PathTaperY = (sbyte)tempFloat;
if (revolutions < 1f)
{
revolutions = 1f;
}
if (revolutions > 4f)
{
revolutions = 4f;
}
tempFloat = 66.66667f * (revolutions - 1.0f);
shapeBlock.PathRevolutions = (byte)tempFloat;
// limits on radiusoffset depend on revolutions and hole size (how?) seems like the maximum range is 0 to 1
if (radiusoffset < 0f)
{
radiusoffset = 0f;
}
if (radiusoffset > 1f)
{
radiusoffset = 1f;
}
tempFloat = 100.0f * radiusoffset;
shapeBlock.PathRadiusOffset = (sbyte)tempFloat;
if (skew < -0.95f)
{
skew = -0.95f;
}
if (skew > 0.95f)
{
skew = 0.95f;
}
tempFloat = 100.0f * skew;
shapeBlock.PathSkew = (sbyte)tempFloat;
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}示例2: SetPrimitiveShapeParams
protected void SetPrimitiveShapeParams(SceneObjectPart part, int holeshape, LSL_Vector cut, float hollow, LSL_Vector twist, LSL_Vector taper_b, LSL_Vector topshear, byte fudge)
{
ObjectShapePacket.ObjectDataBlock shapeBlock;
shapeBlock = SetPrimitiveBlockShapeParams(part, holeshape, cut, hollow, twist);
shapeBlock.ProfileCurve += fudge;
if (taper_b.x < 0f)
{
taper_b.x = 0f;
}
if (taper_b.x > 2f)
{
taper_b.x = 2f;
}
if (taper_b.y < 0f)
{
taper_b.y = 0f;
}
if (taper_b.y > 2f)
{
taper_b.y = 2f;
}
shapeBlock.PathScaleX = (byte)(100 * (2.0 - taper_b.x));
shapeBlock.PathScaleY = (byte)(100 * (2.0 - taper_b.y));
if (topshear.x < -0.5f)
{
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
shapeBlock.PathShearX = (byte)(100 * topshear.x);
shapeBlock.PathShearY = (byte)(100 * topshear.y);
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}示例3: SetPrimitiveShapeParams
//.........這裏部分代碼省略.........
if (holesize.y < 0.05f)
{
holesize.y = 0.05f;
}
if (holesize.y > 0.5f)
{
holesize.y = 0.5f;
}
shapeBlock.PathScaleX = (byte)(100 * (2 - holesize.x));
shapeBlock.PathScaleY = (byte)(100 * (2 - holesize.y));
if (topshear.x < -0.5f)
{
topshear.x = -0.5f;
}
if (topshear.x > 0.5f)
{
topshear.x = 0.5f;
}
if (topshear.y < -0.5f)
{
topshear.y = -0.5f;
}
if (topshear.y > 0.5f)
{
topshear.y = 0.5f;
}
shapeBlock.PathShearX = (byte)(100 * topshear.x);
shapeBlock.PathShearY = (byte)(100 * topshear.y);
if (profilecut.x < 0f)
{
profilecut.x = 0f;
}
if (profilecut.x > 1f)
{
profilecut.x = 1f;
}
if (profilecut.y < 0f)
{
profilecut.y = 0f;
}
if (profilecut.y > 1f)
{
profilecut.y = 1f;
}
if (profilecut.y - cut.x < 0.05f)
{
profilecut.x = cut.y - 0.05f;
}
shapeBlock.ProfileBegin = (ushort)(50000 * profilecut.x);
shapeBlock.ProfileEnd = (ushort)(50000 * (1 - profilecut.y));
if (taper_a.x < -1f)
{
taper_a.x = -1f;
}
if (taper_a.x > 1f)
{
taper_a.x = 1f;
}
if (taper_a.y < -1f)
{
taper_a.y = -1f;
}
if (taper_a.y > 1f)
{
taper_a.y = 1f;
}
shapeBlock.PathTaperX = (sbyte)(100 * taper_a.x);
shapeBlock.PathTaperY = (sbyte)(100 * taper_a.y);
if (revolutions < 1f)
{
revolutions = 1f;
}
if (revolutions > 4f)
{
revolutions = 4f;
}
shapeBlock.PathRevolutions = (byte)(66.666667 * (revolutions - 1.0));
// limits on radiusoffset depend on revolutions and hole size (how?) seems like the maximum range is 0 to 1
if (radiusoffset < 0f)
{
radiusoffset = 0f;
}
if (radiusoffset > 1f)
{
radiusoffset = 1f;
}
shapeBlock.PathRadiusOffset = (sbyte)(100 * radiusoffset);
if (skew < -0.95f)
{
skew = -0.95f;
}
if (skew > 0.95f)
{
skew = 0.95f;
}
shapeBlock.PathSkew = (sbyte)(100 * skew);
part.Shape.SculptEntry = false;
part.UpdateShape(shapeBlock);
}示例4: SetPrimitiveShapeParams
protected void SetPrimitiveShapeParams(SceneObjectPart part, string map, int type)
{
ObjectShapePacket.ObjectDataBlock shapeBlock = new ObjectShapePacket.ObjectDataBlock();
UUID sculptId;
if (!UUID.TryParse(map, out sculptId))
{
sculptId = InventoryKey(map, (int)AssetType.Texture);
}
if (sculptId == UUID.Zero)
return;
shapeBlock.ObjectLocalID = part.LocalId;
shapeBlock.PathScaleX = 100;
shapeBlock.PathScaleY = 150;
int onlytype = (type & 7);//Removes the sculpt flags according to libOMV
if (onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_CYLINDER &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_PLANE &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_SPHERE &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_TORUS &&
onlytype != (int)ScriptBaseClass.PRIM_SCULPT_TYPE_MESH)
{
// default
type |= (int)ScriptBaseClass.PRIM_SCULPT_TYPE_SPHERE;
}
// retain pathcurve
shapeBlock.PathCurve = part.Shape.PathCurve;
part.Shape.SetSculptProperties((byte)type, sculptId);
part.Shape.SculptEntry = true;
part.UpdateShape(shapeBlock);
}