本文整理汇总了C++中TriangleMesh::request_vertex_status方法的典型用法代码示例。如果您正苦于以下问题：C++ TriangleMesh::request_vertex_status方法的具体用法？C++ TriangleMesh::request_vertex_status怎么用？C++ TriangleMesh::request_vertex_status使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类TriangleMesh的用法示例。
在下文中一共展示了TriangleMesh::request_vertex_status方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: remesh
void remesh(const Eigen::MatrixXd &V, const Eigen::MatrixXi &F, const Eigen::VectorXi &M,
Eigen::MatrixXd &Vout, Eigen::MatrixXi &Fout, Eigen::VectorXi &Mout,
double e_length) {
// The boundary vertices.
double zmin = 1e10;
double zmax = -1e10;
for (int i = 0; i < V.rows(); i++) {
zmin = std::min(zmin, V(i, 2));
zmax = std::max(zmax, V(i, 2));
}
Eigen::VectorXd minV = V.colwise().minCoeff(),
maxV = V.colwise().maxCoeff();
// Compute average edge length.
if (e_length <= 0) {
e_length = avg_edgeLength(V, F, M);
}
// Convert to OpenMesh.
TriangleMesh tri;
IGLToOpenMesh(V, F, tri);
// Do some more setup.
tri.update_face_normals();
tri.update_vertex_normals();
tri.request_vertex_status();
tri.request_edge_status();
tri.request_face_status();
// Check all edges to see if they're protected or not.
TriangleMesh::EIter e_it;
for (e_it = tri.edges_begin(); e_it != tri.edges_end(); ++e_it) {
// Get both vertices.
TriangleMesh::VHandle v0 = tri.to_vertex_handle(tri.halfedge_handle(*e_it, 0));
TriangleMesh::VHandle v1 = tri.to_vertex_handle(tri.halfedge_handle(*e_it, 1));
// See if both are nonoriginal
if (M(tri.data(v0).getOriginalIndex()) != GLOBAL::nonoriginal_marker &&
M(tri.data(v1).getOriginalIndex()) != GLOBAL::nonoriginal_marker) {
tri.data(*e_it).setProtected(true);
}
// Also set vertices if they're original.
if (M(tri.data(v0).getOriginalIndex()) != GLOBAL::nonoriginal_marker) {
tri.data(v0).setProtected(true);
}
if (M(tri.data(v1).getOriginalIndex()) != GLOBAL::nonoriginal_marker) {
tri.data(v1).setProtected(true);
}
}
/*
// Check for bad vertices.
for (int i = 0; i < tri.n_vertices(); ++i) {
TriangleMesh::VertexHandle vv = TriangleMesh::VertexHandle(i);
const TriangleMesh::Point &pt = tMesh.point(vv);
// Set statitonary if original marker set.
if (M(tri.data(vv).getOriginalIndex()) == GLOBAL::original_marker) {
}
}
*/
// Then, do the remeshing--but only split long edge, collapse short edges,
// and equalize valences.
IsotropicRemeshing ir(e_length);
//int types = ISOTROPIC_REMESHING_TYPES::SPLIT_LONG_EDGES |
//ISOTROPIC_REMESHING_TYPES::COLLAPSE_SHORT_EDGES |
//ISOTROPIC_REMESHING_TYPES::EQUALIZE_VALENCES |
//ISOTROPIC_REMESHING_TYPES::AREA_EQUALIZATION;
ir.setBoundingBox(TriangleMesh::Point(maxV(0), maxV(1), maxV(2)),
TriangleMesh::Point(minV(0), minV(1), minV(2)));
int types = ISOTROPIC_REMESHING_TYPES::EQUALIZE_VALENCES |
ISOTROPIC_REMESHING_TYPES::AREA_EQUALIZATION;
ir.remesh(&tri, 1, types);
// Then, copy it all back.
Eigen::VectorXi origIdx;
OpenMeshToIGL(tri, Vout, Fout, origIdx);
// Set the new markers as well.
Mout.resize(Vout.rows());
for (int i = 0; i < Vout.rows(); ++i) {
// If it doesn't correspond to a previous vertex, it's a "nonoriginal".
if (origIdx(i) == -1) {
Mout(i) = GLOBAL::nonoriginal_marker;
} else {
// Otherwise, it's the same marker as it was before.
Mout(i) = M(origIdx(i));
int oidx = origIdx(i);
double moved = ( V.row(oidx) - Vout.row(i) ).norm();
if ( moved > GLOBAL::EPS && M(oidx) != GLOBAL::nonoriginal_marker) {
printf("point %d(m:%d new:%d) moved by %lf\n", oidx, M(oidx), i, moved);
Mout(i) = 10;
}
}
int oidx = origIdx(i);
if (Vout(i, 2) - zmin < 0 ||
zmax - Vout(i, 2) < 0) {
printf("point %d(%d) moved out of bounds! by %lf vs %lf,%lf (%le,%le)\n",
oidx, M(oidx), Vout(i, 2), zmin, zmax,
Vout(i,2) - zmin, zmax - Vout(i,2));
exit(1);
//.........这里部分代码省略.........