C++ nsHTMLReflowState::ComputedMinHeight方法代码示例

//.........这里部分代码省略.........
  }
  
  printSize("AW", aReflowState.AvailableWidth());
  printSize("AH", aReflowState.AvailableHeight());
  printSize("CW", aReflowState.ComputedWidth());
  printSize("CH", aReflowState.ComputedHeight());

  printf(" *\n");

#endif

  aStatus = NS_FRAME_COMPLETE;

  // create the layout state
  nsBoxLayoutState state(aPresContext, aReflowState.rendContext);

  nsSize computedSize(aReflowState.ComputedWidth(),aReflowState.ComputedHeight());

  nsMargin m;
  m = aReflowState.ComputedPhysicalBorderPadding();

  //GetBorderAndPadding(m);

  // this happens sometimes. So lets handle it gracefully.
  if (aReflowState.ComputedHeight() == 0) {
    nsSize minSize = GetMinSize(state);
    computedSize.height = minSize.height - m.top - m.bottom;
  }

  nsSize prefSize(0,0);

  // if we are told to layout intrinic then get our preferred size.
  if (computedSize.width == NS_INTRINSICSIZE || computedSize.height == NS_INTRINSICSIZE) {
     prefSize = GetPrefSize(state);
     nsSize minSize = GetMinSize(state);
     nsSize maxSize = GetMaxSize(state);
     prefSize = BoundsCheck(minSize, prefSize, maxSize);
  }

  // get our desiredSize
  if (aReflowState.ComputedWidth() == NS_INTRINSICSIZE) {
    computedSize.width = prefSize.width;
  } else {
    computedSize.width += m.left + m.right;
  }

  if (aReflowState.ComputedHeight() == NS_INTRINSICSIZE) {
    computedSize.height = prefSize.height;
  } else {
    computedSize.height += m.top + m.bottom;
  }

  // handle reflow state min and max sizes
  // XXXbz the width handling here seems to be wrong, since
  // mComputedMin/MaxWidth is a content-box size, whole
  // computedSize.width is a border-box size...
  if (computedSize.width > aReflowState.ComputedMaxWidth())
    computedSize.width = aReflowState.ComputedMaxWidth();

  if (computedSize.width < aReflowState.ComputedMinWidth())
    computedSize.width = aReflowState.ComputedMinWidth();

  // Now adjust computedSize.height for our min and max computed
  // height.  The only problem is that those are content-box sizes,
  // while computedSize.height is a border-box size.  So subtract off
  // m.TopBottom() before adjusting, then readd it.
  computedSize.height = std::max(0, computedSize.height - m.TopBottom());
  computedSize.height = NS_CSS_MINMAX(computedSize.height,
                                      aReflowState.ComputedMinHeight(),
                                      aReflowState.ComputedMaxHeight());
  computedSize.height += m.TopBottom();

  nsRect r(mRect.x, mRect.y, computedSize.width, computedSize.height);

  SetBounds(state, r);
 
  // layout our children
  Layout(state);
  
  // ok our child could have gotten bigger. So lets get its bounds
  aDesiredSize.Width() = mRect.width;
  aDesiredSize.Height() = mRect.height;
  aDesiredSize.SetTopAscent(GetBoxAscent(state));

  // the overflow rect is set in SetBounds() above
  aDesiredSize.mOverflowAreas = GetOverflowAreas();

#ifdef DO_NOISY_REFLOW
  {
    printf("%p ** nsLBF(done) W:%d H:%d  ", this, aDesiredSize.Width(), aDesiredSize.Height());

    if (maxElementWidth) {
      printf("MW:%d\n", *maxElementWidth); 
    } else {
      printf("MW:?\n"); 
    }

  }
#endif
}

void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
                                               nsHTMLReflowMetrics& aButtonDesiredSize,
                                               const nsHTMLReflowState& aButtonReflowState,
                                               nsIFrame* aFirstKid)
{
  // Buttons have some bonus renderer-determined border/padding,
  // which occupies part of the button's content-box area:
  const nsMargin focusPadding = mRenderer.GetAddedButtonBorderAndPadding();

  WritingMode wm = aFirstKid->GetWritingMode();
  LogicalSize availSize = aButtonReflowState.ComputedSize(GetWritingMode());
  availSize.BSize(wm) = NS_INTRINSICSIZE;

  // Indent the child inside us by the focus border. We must do this separate
  // from the regular border.
  availSize.ISize(wm) -= LogicalMargin(wm, focusPadding).IStartEnd(wm);

  // See whether out availSize's width is big enough.  If it's smaller than our
  // intrinsic min width, that means that the kid wouldn't really fit; for a
  // better look in such cases we adjust the available width and our left
  // offset to allow the kid to spill left into our padding.
  nscoord xoffset = focusPadding.left +
    aButtonReflowState.ComputedPhysicalBorderPadding().left;
  nscoord extrawidth = GetMinISize(aButtonReflowState.rendContext) -
    aButtonReflowState.ComputedWidth();
  if (extrawidth > 0) {
    nscoord extraleft = extrawidth / 2;
    nscoord extraright = extrawidth - extraleft;
    NS_ASSERTION(extraright >=0, "How'd that happen?");

    // Do not allow the extras to be bigger than the relevant padding
    extraleft = std::min(extraleft, aButtonReflowState.ComputedPhysicalPadding().left);
    extraright = std::min(extraright, aButtonReflowState.ComputedPhysicalPadding().right);
    xoffset -= extraleft;
    availSize.Width(wm) = availSize.Width(wm) + extraleft + extraright;
  }
  availSize.Width(wm) = std::max(availSize.Width(wm), 0);

  // Give child a clone of the button's reflow state, with height/width reduced
  // by focusPadding, so that descendants with height:100% don't protrude.
  nsHTMLReflowState adjustedButtonReflowState =
    CloneReflowStateWithReducedContentBox(aButtonReflowState, focusPadding);

  nsHTMLReflowState contentsReflowState(aPresContext,
                                        adjustedButtonReflowState,
                                        aFirstKid, availSize);

  nsReflowStatus contentsReflowStatus;
  nsHTMLReflowMetrics contentsDesiredSize(aButtonReflowState);
  ReflowChild(aFirstKid, aPresContext,
              contentsDesiredSize, contentsReflowState,
              xoffset,
              focusPadding.top + aButtonReflowState.ComputedPhysicalBorderPadding().top,
              0, contentsReflowStatus);
  MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
             "We gave button-contents frame unconstrained available height, "
             "so it should be complete");

  // Compute the button's content-box height:
  nscoord buttonContentBoxHeight = 0;
  if (aButtonReflowState.ComputedHeight() != NS_INTRINSICSIZE) {
    // Button has a fixed height -- that's its content-box height.
    buttonContentBoxHeight = aButtonReflowState.ComputedHeight();
  } else {
    // Button is intrinsically sized -- it should shrinkwrap the
    // button-contents' height, plus any focus-padding space:
    buttonContentBoxHeight =
      contentsDesiredSize.Height() + focusPadding.TopBottom();

    // Make sure we obey min/max-height in the case when we're doing intrinsic
    // sizing (we get it for free when we have a non-intrinsic
    // aButtonReflowState.ComputedHeight()).  Note that we do this before
    // adjusting for borderpadding, since mComputedMaxHeight and
    // mComputedMinHeight are content heights.
    buttonContentBoxHeight =
      NS_CSS_MINMAX(buttonContentBoxHeight,
                    aButtonReflowState.ComputedMinHeight(),
                    aButtonReflowState.ComputedMaxHeight());
  }

  // Center child vertically in the button
  // (technically, inside of the button's focus-padding area)
  nscoord extraSpace =
    buttonContentBoxHeight - focusPadding.TopBottom() -
    contentsDesiredSize.Height();

  nscoord yoffset = std::max(0, extraSpace / 2);

  // Adjust yoffset to be in terms of the button's frame-rect, instead of
  // its focus-padding rect:
  yoffset += focusPadding.top + aButtonReflowState.ComputedPhysicalBorderPadding().top;

  // Place the child
  FinishReflowChild(aFirstKid, aPresContext,
                    contentsDesiredSize, &contentsReflowState,
                    xoffset, yoffset, 0);

  // Make sure we have a useful 'ascent' value for the child
  if (contentsDesiredSize.BlockStartAscent() ==
//.........这里部分代码省略.........

void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
                             nsHTMLReflowMetrics& aDesiredSize,
                             const nsHTMLReflowState& aReflowState,
                             nsReflowStatus& aStatus)
{
  DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowState, aDesiredSize, aStatus);

  NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");

  NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
               "nsNumberControlFrame should not have continuations; if it does we "
               "need to call RegUnregAccessKey only for the first");

  NS_ASSERTION(!mFrames.FirstChild() ||
               !mFrames.FirstChild()->GetNextSibling(),
               "We expect at most one direct child frame");

  if (mState & NS_FRAME_FIRST_REFLOW) {
    nsFormControlFrame::RegUnRegAccessKey(this, true);
  }

  // The width of our content box, which is the available width
  // for our anonymous content:
  const nscoord contentBoxWidth = aReflowState.ComputedWidth();
  nscoord contentBoxHeight = aReflowState.ComputedHeight();

  nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();

  if (!outerWrapperFrame) { // display:none?
    if (contentBoxHeight == NS_INTRINSICSIZE) {
      contentBoxHeight = 0;
    }
  } else {
    NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");

    nsHTMLReflowMetrics wrappersDesiredSize(aReflowState);

    WritingMode wm = outerWrapperFrame->GetWritingMode();
    LogicalSize availSize = aReflowState.ComputedSize(wm);
    availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;

    nsHTMLReflowState wrapperReflowState(aPresContext, aReflowState,
                                         outerWrapperFrame, availSize);

    // offsets of wrapper frame
    nscoord xoffset = aReflowState.ComputedPhysicalBorderPadding().left +
                        wrapperReflowState.ComputedPhysicalMargin().left;
    nscoord yoffset = aReflowState.ComputedPhysicalBorderPadding().top +
                        wrapperReflowState.ComputedPhysicalMargin().top;

    nsReflowStatus childStatus;
    ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
                wrapperReflowState, xoffset, yoffset, 0, childStatus);
    MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
               "We gave our child unconstrained height, so it should be complete");

    nscoord wrappersMarginBoxHeight = wrappersDesiredSize.Height() +
      wrapperReflowState.ComputedPhysicalMargin().TopBottom();

    if (contentBoxHeight == NS_INTRINSICSIZE) {
      // We are intrinsically sized -- we should shrinkwrap the outer wrapper's
      // height:
      contentBoxHeight = wrappersMarginBoxHeight;

      // Make sure we obey min/max-height in the case when we're doing intrinsic
      // sizing (we get it for free when we have a non-intrinsic
      // aReflowState.ComputedHeight()).  Note that we do this before
      // adjusting for borderpadding, since mComputedMaxHeight and
      // mComputedMinHeight are content heights.
      contentBoxHeight =
        NS_CSS_MINMAX(contentBoxHeight,
                      aReflowState.ComputedMinHeight(),
                      aReflowState.ComputedMaxHeight());
    }

    // Center child vertically
    nscoord extraSpace = contentBoxHeight - wrappersMarginBoxHeight;
    yoffset += std::max(0, extraSpace / 2);

    // Place the child
    FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
                      &wrapperReflowState, xoffset, yoffset, 0);

    aDesiredSize.SetBlockStartAscent(
       wrappersDesiredSize.BlockStartAscent() +
       outerWrapperFrame->BStart(aReflowState.GetWritingMode(),
                                 contentBoxWidth));
  }

  aDesiredSize.Width() = contentBoxWidth +
                         aReflowState.ComputedPhysicalBorderPadding().LeftRight();
  aDesiredSize.Height() = contentBoxHeight +
                          aReflowState.ComputedPhysicalBorderPadding().TopBottom();

  aDesiredSize.SetOverflowAreasToDesiredBounds();

  if (outerWrapperFrame) {
    ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
//.........这里部分代码省略.........