C++ nsHTMLReflowState::ComputedLogicalMargin方法代码示例

/**
 * Attempt to place the block frame within the available space.  If
 * it fits, apply inline-dir ("horizontal") positioning (CSS 10.3.3),
 * collapse margins (CSS2 8.3.1). Also apply relative positioning.
 */
bool
nsBlockReflowContext::PlaceBlock(const nsHTMLReflowState&  aReflowState,
                                 bool                      aForceFit,
                                 nsLineBox*                aLine,
                                 nsCollapsingMargin&       aBEndMarginResult,
                                 nsOverflowAreas&          aOverflowAreas,
                                 nsReflowStatus            aReflowStatus)
{
  // Compute collapsed block-end margin value.
  WritingMode wm = aReflowState.GetWritingMode();
  WritingMode parentWM = mMetrics.GetWritingMode();
  if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
    aBEndMarginResult = mMetrics.mCarriedOutBEndMargin;
    aBEndMarginResult.Include(aReflowState.ComputedLogicalMargin().
      ConvertTo(parentWM, wm).BEnd(parentWM));
  } else {
    // The used block-end-margin is set to zero before a break.
    aBEndMarginResult.Zero();
  }

  nscoord backupContainingBlockAdvance = 0;

  // Check whether the block's block-end margin collapses with its block-start
  // margin. See CSS 2.1 section 8.3.1; those rules seem to match
  // nsBlockFrame::IsEmpty(). Any such block must have zero block-size so
  // check that first. Note that a block can have clearance and still
  // have adjoining block-start/end margins, because the clearance goes
  // above the block-start margin.
  // Mark the frame as non-dirty; it has been reflowed (or we wouldn't
  // be here), and we don't want to assert in CachedIsEmpty()
  mFrame->RemoveStateBits(NS_FRAME_IS_DIRTY);
  bool empty = 0 == mMetrics.BSize(parentWM) && aLine->CachedIsEmpty();
  if (empty) {
    // Collapse the block-end margin with the block-start margin that was
    // already applied.
    aBEndMarginResult.Include(mBStartMargin);

#ifdef NOISY_BLOCKDIR_MARGINS
    printf("  ");
    nsFrame::ListTag(stdout, mOuterReflowState.frame);
    printf(": ");
    nsFrame::ListTag(stdout, mFrame);
    printf(" -- collapsing block start & end margin together; BStart=%d spaceBStart=%d\n",
           mBCoord, mSpace.BStart(mWritingMode));
#endif
    // Section 8.3.1 of CSS 2.1 says that blocks with adjoining
    // "top/bottom" (i.e. block-start/end) margins whose top margin collapses
    // with their parent's top margin should have their top border-edge at the
    // top border-edge of their parent. We actually don't have to do
    // anything special to make this happen. In that situation,
    // nsBlockFrame::ShouldApplyBStartMargin will have returned false,
    // and mBStartMargin and aClearance will have been zero in
    // ReflowBlock.

    // If we did apply our block-start margin, but now we're collapsing it
    // into the block-end margin, we need to back up the containing
    // block's bCoord-advance by our block-start margin so that it doesn't get
    // counted twice. Note that here we're allowing the line's bounds
    // to become different from the block's position; we do this
    // because the containing block will place the next line at the
    // line's BEnd, and it must place the next line at a different
    // point from where this empty block will be.
    backupContainingBlockAdvance = mBStartMargin.get();
  }

  // See if the frame fit. If it's the first frame or empty then it
  // always fits. If the block-size is unconstrained then it always fits,
  // even if there's some sort of integer overflow that makes bCoord +
  // mMetrics.BSize() appear to go beyond the available block size.
  if (!empty && !aForceFit &&
      mSpace.BSize(mWritingMode) != NS_UNCONSTRAINEDSIZE) {
    nscoord bEnd = mBCoord -
                   backupContainingBlockAdvance + mMetrics.BSize(mWritingMode);
    if (bEnd > mSpace.BEnd(mWritingMode)) {
      // didn't fit, we must acquit.
      mFrame->DidReflow(mPresContext, &aReflowState,
                        nsDidReflowStatus::FINISHED);
      return false;
    }
  }

  aLine->SetBounds(mWritingMode,
                   mICoord, mBCoord - backupContainingBlockAdvance,
                   mMetrics.ISize(mWritingMode), mMetrics.BSize(mWritingMode),
                   mContainerSize);

  WritingMode frameWM = mFrame->GetWritingMode();
  LogicalPoint logPos =
    LogicalPoint(mWritingMode, mICoord, mBCoord).
      ConvertTo(frameWM, mWritingMode,
                mContainerSize - mMetrics.PhysicalSize());

  // ApplyRelativePositioning in right-to-left writing modes needs to
  // know the updated frame width
  mFrame->SetSize(mWritingMode, mMetrics.Size(mWritingMode));
//.........这里部分代码省略.........

bool
nsBlockReflowContext::ComputeCollapsedBStartMargin(const nsHTMLReflowState& aRS,
                                                   nsCollapsingMargin* aMargin,
                                                   nsIFrame* aClearanceFrame,
                                                   bool* aMayNeedRetry,
                                                   bool* aBlockIsEmpty)
{
  WritingMode wm = aRS.GetWritingMode();
  WritingMode parentWM = mMetrics.GetWritingMode();

  // Include block-start element of frame's margin
  aMargin->Include(aRS.ComputedLogicalMargin().ConvertTo(parentWM, wm).BStart(parentWM));

  // The inclusion of the block-end margin when empty is done by the caller
  // since it doesn't need to be done by the top-level (non-recursive)
  // caller.

#ifdef NOISY_BLOCKDIR_MARGINS
  nsFrame::ListTag(stdout, aRS.frame);
  printf(": %d => %d\n", aRS.ComputedLogicalMargin().BStart(wm), aMargin->get());
#endif

  bool dirtiedLine = false;
  bool setBlockIsEmpty = false;

  // Calculate the frame's generational block-start-margin from its child
  // blocks. Note that if the frame has a non-zero block-start-border or
  // block-start-padding then this step is skipped because it will be a margin
  // root.  It is also skipped if the frame is a margin root for other
  // reasons.
  nsIFrame* frame = DescendIntoBlockLevelFrame(aRS.frame);
  nsPresContext* prescontext = frame->PresContext();
  nsBlockFrame* block = nullptr;
  if (0 == aRS.ComputedLogicalBorderPadding().BStart(wm)) {
    block = nsLayoutUtils::GetAsBlock(frame);
    if (block) {
      bool bStartMarginRoot, unused;
      block->IsMarginRoot(&bStartMarginRoot, &unused);
      if (bStartMarginRoot) {
        block = nullptr;
      }
    }
  }

  // iterate not just through the lines of 'block' but also its
  // overflow lines and the normal and overflow lines of its next in
  // flows. Note that this will traverse some frames more than once:
  // for example, if A contains B and A->nextinflow contains
  // B->nextinflow, we'll traverse B->nextinflow twice. But this is
  // OK because our traversal is idempotent.
  for ( ;block; block = static_cast<nsBlockFrame*>(block->GetNextInFlow())) {
    for (int overflowLines = 0; overflowLines <= 1; ++overflowLines) {
      nsBlockFrame::line_iterator line;
      nsBlockFrame::line_iterator line_end;
      bool anyLines = true;
      if (overflowLines) {
        nsBlockFrame::FrameLines* frames = block->GetOverflowLines();
        nsLineList* lines = frames ? &frames->mLines : nullptr;
        if (!lines) {
          anyLines = false;
        } else {
          line = lines->begin();
          line_end = lines->end();
        }
      } else {
        line = block->begin_lines();
        line_end = block->end_lines();
      }
      for (; anyLines && line != line_end; ++line) {
        if (!aClearanceFrame && line->HasClearance()) {
          // If we don't have a clearance frame, then we're computing
          // the collapsed margin in the first pass, assuming that all
          // lines have no clearance. So clear their clearance flags.
          line->ClearHasClearance();
          line->MarkDirty();
          dirtiedLine = true;
        }

        bool isEmpty;
        if (line->IsInline()) {
          isEmpty = line->IsEmpty();
        } else {
          nsIFrame* kid = line->mFirstChild;
          if (kid == aClearanceFrame) {
            line->SetHasClearance();
            line->MarkDirty();
            dirtiedLine = true;
            goto done;
          }
          // Here is where we recur. Now that we have determined that a
          // generational collapse is required we need to compute the
          // child blocks margin and so in so that we can look into
          // it. For its margins to be computed we need to have a reflow
          // state for it.

          // We may have to construct an extra reflow state here if
          // we drilled down through a block wrapper. At the moment
          // we can only drill down one level so we only have to support
          // one extra reflow state.
          const nsHTMLReflowState* outerReflowState = &aRS;
//.........这里部分代码省略.........

void
nsBlockReflowContext::ReflowBlock(const LogicalRect&  aSpace,
                                  bool                aApplyBStartMargin,
                                  nsCollapsingMargin& aPrevMargin,
                                  nscoord             aClearance,
                                  bool                aIsAdjacentWithBStart,
                                  nsLineBox*          aLine,
                                  nsHTMLReflowState&  aFrameRS,
                                  nsReflowStatus&     aFrameReflowStatus,
                                  nsBlockReflowState& aState)
{
  mFrame = aFrameRS.frame;
  mWritingMode = aState.mReflowState.GetWritingMode();
  mContainerSize = aState.ContainerSize();
  mSpace = aSpace;

  if (!aIsAdjacentWithBStart) {
    aFrameRS.mFlags.mIsTopOfPage = false;  // make sure this is cleared
  }

  if (aApplyBStartMargin) {
    mBStartMargin = aPrevMargin;

#ifdef NOISY_BLOCKDIR_MARGINS
    nsFrame::ListTag(stdout, mOuterReflowState.frame);
    printf(": reflowing ");
    nsFrame::ListTag(stdout, mFrame);
    printf(" margin => %d, clearance => %d\n", mBStartMargin.get(), aClearance);
#endif

    // Adjust the available size if it's constrained so that the
    // child frame doesn't think it can reflow into its margin area.
    if (mWritingMode.IsOrthogonalTo(mFrame->GetWritingMode())) {
      if (NS_UNCONSTRAINEDSIZE != aFrameRS.AvailableISize()) {
        aFrameRS.AvailableISize() -= mBStartMargin.get() + aClearance;
      }
    } else {
      if (NS_UNCONSTRAINEDSIZE != aFrameRS.AvailableBSize()) {
        aFrameRS.AvailableBSize() -= mBStartMargin.get() + aClearance;
      }
    }
  }

  nscoord tI = 0, tB = 0;
  // The values of x and y do not matter for floats, so don't bother
  // calculating them. Floats are guaranteed to have their own float
  // manager, so tI and tB don't matter.  mICoord and mBCoord don't
  // matter becacuse they are only used in PlaceBlock, which is not used
  // for floats.
  if (aLine) {
    // Compute inline/block coordinate where reflow will begin. Use the
    // rules from 10.3.3 to determine what to apply. At this point in the
    // reflow auto inline-start/end margins will have a zero value.

    WritingMode frameWM = aFrameRS.GetWritingMode();
    LogicalMargin usedMargin =
      aFrameRS.ComputedLogicalMargin().ConvertTo(mWritingMode, frameWM);
    mICoord = mSpace.IStart(mWritingMode) + usedMargin.IStart(mWritingMode);
    mBCoord = mSpace.BStart(mWritingMode) + mBStartMargin.get() + aClearance;

    LogicalRect space(mWritingMode, mICoord, mBCoord,
                      mSpace.ISize(mWritingMode) -
                      usedMargin.IStartEnd(mWritingMode),
                      mSpace.BSize(mWritingMode) -
                      usedMargin.BStartEnd(mWritingMode));
    tI = space.LineLeft(mWritingMode, mContainerSize);
    tB = mBCoord;

    if ((mFrame->GetStateBits() & NS_BLOCK_FLOAT_MGR) == 0)
      aFrameRS.mBlockDelta =
        mOuterReflowState.mBlockDelta + mBCoord - aLine->BStart();
  }

#ifdef DEBUG
  mMetrics.ISize(mWritingMode) = nscoord(0xdeadbeef);
  mMetrics.BSize(mWritingMode) = nscoord(0xdeadbeef);
#endif

  mOuterReflowState.mFloatManager->Translate(tI, tB);
  mFrame->Reflow(mPresContext, mMetrics, aFrameRS, aFrameReflowStatus);
  mOuterReflowState.mFloatManager->Translate(-tI, -tB);

#ifdef DEBUG
  if (!NS_INLINE_IS_BREAK_BEFORE(aFrameReflowStatus)) {
    if (CRAZY_SIZE(mMetrics.ISize(mWritingMode)) ||
        CRAZY_SIZE(mMetrics.BSize(mWritingMode))) {
      printf("nsBlockReflowContext: ");
      nsFrame::ListTag(stdout, mFrame);
      printf(" metrics=%d,%d!\n",
             mMetrics.ISize(mWritingMode), mMetrics.BSize(mWritingMode));
    }
    if ((mMetrics.ISize(mWritingMode) == nscoord(0xdeadbeef)) ||
        (mMetrics.BSize(mWritingMode) == nscoord(0xdeadbeef))) {
      printf("nsBlockReflowContext: ");
      nsFrame::ListTag(stdout, mFrame);
      printf(" didn't set i/b %d,%d!\n",
             mMetrics.ISize(mWritingMode), mMetrics.BSize(mWritingMode));
    }
  }
#endif
//.........这里部分代码省略.........