C++ ARMFunctionInfo::setGPRCalleeSavedArea1Size方法代码示例

//.........这里部分代码省略.........
  for (std::vector<CalleeSavedInfo>::const_iterator I = CSI.begin(),
         E = CSI.end(); I != E; ++I) {
    unsigned Reg = I->getReg();
    int FI = I->getFrameIdx();
    switch (Reg) {
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
    case ARM::R12:
      if (STI.isTargetMachO())
        break;
      // fallthough
    case ARM::R0:
    case ARM::R1:
    case ARM::R2:
    case ARM::R3:
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      unsigned CFIIndex = MMI.addFrameInst(MCCFIInstruction::createOffset(
          nullptr, MRI->getDwarfRegNum(Reg, true), MFI->getObjectOffset(FI)));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
      break;
    }
  }

  // Adjust FP so it point to the stack slot that contains the previous FP.
  if (HasFP) {
    FramePtrOffsetInBlock +=
        MFI->getObjectOffset(FramePtrSpillFI) + GPRCS1Size + ArgRegsSaveSize;
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr)
      .addReg(ARM::SP).addImm(FramePtrOffsetInBlock / 4)
      .setMIFlags(MachineInstr::FrameSetup));
    if(FramePtrOffsetInBlock) {
      CFAOffset += FramePtrOffsetInBlock;
      unsigned CFIIndex = MMI.addFrameInst(MCCFIInstruction::createDefCfa(
          nullptr, MRI->getDwarfRegNum(FramePtr, true), CFAOffset));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
    } else {
      unsigned CFIIndex =
          MMI.addFrameInst(MCCFIInstruction::createDefCfaRegister(
              nullptr, MRI->getDwarfRegNum(FramePtr, true)));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
    }
    if (NumBytes > 508)
      // If offset is > 508 then sp cannot be adjusted in a single instruction,
      // try restoring from fp instead.
      AFI->setShouldRestoreSPFromFP(true);
  }

  if (NumBytes) {
    // Insert it after all the callee-save spills.
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes,
                 MachineInstr::FrameSetup);
    if (!HasFP) {
      CFAOffset -= NumBytes;
      unsigned CFIIndex = MMI.addFrameInst(
          MCCFIInstruction::createDefCfaOffset(nullptr, CFAOffset));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
    }
  }

  if (STI.isTargetELF() && HasFP)
    MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() -
                             AFI->getFramePtrSpillOffset());

  AFI->setGPRCalleeSavedArea1Size(GPRCS1Size);
  AFI->setGPRCalleeSavedArea2Size(GPRCS2Size);
  AFI->setDPRCalleeSavedAreaSize(DPRCSSize);

  // Thumb1 does not currently support dynamic stack realignment.  Report a
  // fatal error rather then silently generate bad code.
  if (RegInfo->needsStackRealignment(MF))
      report_fatal_error("Dynamic stack realignment not supported for thumb1.");

  // If we need a base pointer, set it up here. It's whatever the value
  // of the stack pointer is at this point. Any variable size objects
  // will be allocated after this, so we can still use the base pointer
  // to reference locals.
  if (RegInfo->hasBasePointer(MF))
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), BasePtr)
                   .addReg(ARM::SP));

  // If the frame has variable sized objects then the epilogue must restore
  // the sp from fp. We can assume there's an FP here since hasFP already
  // checks for hasVarSizedObjects.
  if (MFI->hasVarSizedObjects())
    AFI->setShouldRestoreSPFromFP(true);
}

//.........这里部分代码省略.........
      // the prologue. Reset MBBI back to the last PUSH of the prologue.
      MBBI = OldMBBI;
      break;
    }
  }

  // Emit call frame information for the callee-saved high registers.
  for (auto &I : CSI) {
    unsigned Reg = I.getReg();
    int FI = I.getFrameIdx();
    switch (Reg) {
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
    case ARM::R12: {
      unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createOffset(
          nullptr, MRI->getDwarfRegNum(Reg, true), MFI.getObjectOffset(FI)));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
      break;
    }
    default:
      break;
    }
  }

  if (NumBytes) {
    // Insert it after all the callee-save spills.
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes,
                 MachineInstr::FrameSetup);
    if (!HasFP) {
      CFAOffset -= NumBytes;
      unsigned CFIIndex = MF.addFrameInst(
          MCCFIInstruction::createDefCfaOffset(nullptr, CFAOffset));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
    }
  }

  if (STI.isTargetELF() && HasFP)
    MFI.setOffsetAdjustment(MFI.getOffsetAdjustment() -
                            AFI->getFramePtrSpillOffset());

  AFI->setGPRCalleeSavedArea1Size(GPRCS1Size);
  AFI->setGPRCalleeSavedArea2Size(GPRCS2Size);
  AFI->setDPRCalleeSavedAreaSize(DPRCSSize);

  if (RegInfo->needsStackRealignment(MF)) {
    const unsigned NrBitsToZero = countTrailingZeros(MFI.getMaxAlignment());
    // Emit the following sequence, using R4 as a temporary, since we cannot use
    // SP as a source or destination register for the shifts:
    // mov  r4, sp
    // lsrs r4, r4, #NrBitsToZero
    // lsls r4, r4, #NrBitsToZero
    // mov  sp, r4
    BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::R4)
      .addReg(ARM::SP, RegState::Kill)
      .add(predOps(ARMCC::AL));

    BuildMI(MBB, MBBI, dl, TII.get(ARM::tLSRri), ARM::R4)
      .addDef(ARM::CPSR)
      .addReg(ARM::R4, RegState::Kill)
      .addImm(NrBitsToZero)
      .add(predOps(ARMCC::AL));

    BuildMI(MBB, MBBI, dl, TII.get(ARM::tLSLri), ARM::R4)
      .addDef(ARM::CPSR)
      .addReg(ARM::R4, RegState::Kill)
      .addImm(NrBitsToZero)
      .add(predOps(ARMCC::AL));

    BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP)
      .addReg(ARM::R4, RegState::Kill)
      .add(predOps(ARMCC::AL));

    AFI->setShouldRestoreSPFromFP(true);
  }

  // If we need a base pointer, set it up here. It's whatever the value
  // of the stack pointer is at this point. Any variable size objects
  // will be allocated after this, so we can still use the base pointer
  // to reference locals.
  if (RegInfo->hasBasePointer(MF))
    BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), BasePtr)
        .addReg(ARM::SP)
        .add(predOps(ARMCC::AL));

  // If the frame has variable sized objects then the epilogue must restore
  // the sp from fp. We can assume there's an FP here since hasFP already
  // checks for hasVarSizedObjects.
  if (MFI.hasVarSizedObjects())
    AFI->setShouldRestoreSPFromFP(true);

  // In some cases, virtual registers have been introduced, e.g. by uses of
  // emitThumbRegPlusImmInReg.
  MF.getProperties().reset(MachineFunctionProperties::Property::NoVRegs);
}

//.........这里部分代码省略.........

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  if (HasFP)
    AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) +
                                NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
  AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset);
  AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset);

  // Move past area 3.
  if (DPRCSSize > 0) {
    MBBI++;
    // Since vpush register list cannot have gaps, there may be multiple vpush
    // instructions in the prologue.
    while (MBBI->getOpcode() == ARM::VSTMDDB_UPD)
      MBBI++;
  }

  NumBytes = DPRCSOffset;
  if (NumBytes) {
    // Adjust SP after all the callee-save spills.
    emitSPUpdate(isARM, MBB, MBBI, dl, TII, -NumBytes,
                 MachineInstr::FrameSetup);
    if (HasFP && isARM)
      // Restore from fp only in ARM mode: e.g. sub sp, r7, #24
      // Note it's not safe to do this in Thumb2 mode because it would have
      // taken two instructions:
      // mov sp, r7
      // sub sp, #24
      // If an interrupt is taken between the two instructions, then sp is in
      // an inconsistent state (pointing to the middle of callee-saved area).
      // The interrupt handler can end up clobbering the registers.
      AFI->setShouldRestoreSPFromFP(true);
  }

  if (STI.isTargetELF() && hasFP(MF))
    MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() -
                             AFI->getFramePtrSpillOffset());

  AFI->setGPRCalleeSavedArea1Size(GPRCS1Size);
  AFI->setGPRCalleeSavedArea2Size(GPRCS2Size);
  AFI->setDPRCalleeSavedAreaSize(DPRCSSize);

  // If we need dynamic stack realignment, do it here. Be paranoid and make
  // sure if we also have VLAs, we have a base pointer for frame access.
  if (RegInfo->needsStackRealignment(MF)) {
    unsigned MaxAlign = MFI->getMaxAlignment();
    assert (!AFI->isThumb1OnlyFunction());
    if (!AFI->isThumbFunction()) {
      // Emit bic sp, sp, MaxAlign
      AddDefaultCC(AddDefaultPred(BuildMI(MBB, MBBI, dl,
                                          TII.get(ARM::BICri), ARM::SP)
                                  .addReg(ARM::SP, RegState::Kill)
                                  .addImm(MaxAlign-1)));
    } else {
      // We cannot use sp as source/dest register here, thus we're emitting the
      // following sequence:
      // mov r4, sp
      // bic r4, r4, MaxAlign
      // mov sp, r4
      // FIXME: It will be better just to find spare register here.
      AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::R4)
        .addReg(ARM::SP, RegState::Kill));
      AddDefaultCC(AddDefaultPred(BuildMI(MBB, MBBI, dl,
                                          TII.get(ARM::t2BICri), ARM::R4)
                                  .addReg(ARM::R4, RegState::Kill)
                                  .addImm(MaxAlign-1)));
      AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP)
        .addReg(ARM::R4, RegState::Kill));
    }

    AFI->setShouldRestoreSPFromFP(true);
  }

  // If we need a base pointer, set it up here. It's whatever the value
  // of the stack pointer is at this point. Any variable size objects
  // will be allocated after this, so we can still use the base pointer
  // to reference locals.
  // FIXME: Clarify FrameSetup flags here.
  if (RegInfo->hasBasePointer(MF)) {
    if (isARM)
      BuildMI(MBB, MBBI, dl,
              TII.get(ARM::MOVr), RegInfo->getBaseRegister())
        .addReg(ARM::SP)
        .addImm((unsigned)ARMCC::AL).addReg(0).addReg(0);
    else
      AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                             RegInfo->getBaseRegister())
        .addReg(ARM::SP));
  }

  // If the frame has variable sized objects then the epilogue must restore
  // the sp from fp. We can assume there's an FP here since hasFP already
  // checks for hasVarSizedObjects.
  if (MFI->hasVarSizedObjects())
    AFI->setShouldRestoreSPFromFP(true);
}

//.........这里部分代码省略.........

  if (VARegSaveSize)
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -VARegSaveSize,
                 MachineInstr::FrameSetup);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes,
                   MachineInstr::FrameSetup);
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      AFI->addGPRCalleeSavedArea1Frame(FI);
      GPRCS1Size += 4;
      break;
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      if (STI.isTargetDarwin()) {
        AFI->addGPRCalleeSavedArea2Frame(FI);
        GPRCS2Size += 4;
      } else {
        AFI->addGPRCalleeSavedArea1Frame(FI);
        GPRCS1Size += 4;
      }
      break;
    default:
      AFI->addDPRCalleeSavedAreaFrame(FI);
      DPRCSSize += 8;
    }
  }

  if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) {
    ++MBBI;
    if (MBBI != MBB.end())
      dl = MBBI->getDebugLoc();
  }

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
  AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset);
  AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset);
  NumBytes = DPRCSOffset;

  // Adjust FP so it point to the stack slot that contains the previous FP.
  if (hasFP(MF)) {
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr)
      .addFrameIndex(FramePtrSpillFI).addImm(0)
      .setMIFlags(MachineInstr::FrameSetup));
    if (NumBytes > 508)
      // If offset is > 508 then sp cannot be adjusted in a single instruction,
      // try restoring from fp instead.
      AFI->setShouldRestoreSPFromFP(true);
  }

  if (NumBytes)
    // Insert it after all the callee-save spills.
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes,
                 MachineInstr::FrameSetup);

  if (STI.isTargetELF() && hasFP(MF))
    MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() -
                             AFI->getFramePtrSpillOffset());

  AFI->setGPRCalleeSavedArea1Size(GPRCS1Size);
  AFI->setGPRCalleeSavedArea2Size(GPRCS2Size);
  AFI->setDPRCalleeSavedAreaSize(DPRCSSize);

  // If we need a base pointer, set it up here. It's whatever the value
  // of the stack pointer is at this point. Any variable size objects
  // will be allocated after this, so we can still use the base pointer
  // to reference locals.
  if (RegInfo->hasBasePointer(MF))
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), BasePtr)
                   .addReg(ARM::SP));

  // If the frame has variable sized objects then the epilogue must restore
  // the sp from fp. We can assume there's an FP here since hasFP already
  // checks for hasVarSizedObjects.
  if (MFI->hasVarSizedObjects())
    AFI->setShouldRestoreSPFromFP(true);
}

void Thumb1RegisterInfo::emitPrologue(MachineFunction &MF) const {
  MachineBasicBlock &MBB = MF.front();
  MachineBasicBlock::iterator MBBI = MBB.begin();
  MachineFrameInfo  *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  unsigned NumBytes = MFI->getStackSize();
  const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
  DebugLoc dl = (MBBI != MBB.end() ?
                 MBBI->getDebugLoc() : DebugLoc::getUnknownLoc());

  // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4.
  NumBytes = (NumBytes + 3) & ~3;
  MFI->setStackSize(NumBytes);

  // Determine the sizes of each callee-save spill areas and record which frame
  // belongs to which callee-save spill areas.
  unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0;
  int FramePtrSpillFI = 0;

  if (VARegSaveSize)
    emitSPUpdate(MBB, MBBI, TII, dl, *this, -VARegSaveSize);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *this, -NumBytes);
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      AFI->addGPRCalleeSavedArea1Frame(FI);
      GPRCS1Size += 4;
      break;
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      if (STI.isTargetDarwin()) {
        AFI->addGPRCalleeSavedArea2Frame(FI);
        GPRCS2Size += 4;
      } else {
        AFI->addGPRCalleeSavedArea1Frame(FI);
        GPRCS1Size += 4;
      }
      break;
    default:
      AFI->addDPRCalleeSavedAreaFrame(FI);
      DPRCSSize += 8;
    }
  }

  if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) {
    ++MBBI;
    if (MBBI != MBB.end())
      dl = MBBI->getDebugLoc();
  }

  // Darwin ABI requires FP to point to the stack slot that contains the
  // previous FP.
  if (STI.isTargetDarwin() || hasFP(MF)) {
    BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr)
      .addFrameIndex(FramePtrSpillFI).addImm(0);
  }

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
  AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset);
  AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset);

  NumBytes = DPRCSOffset;
  if (NumBytes) {
    // Insert it after all the callee-save spills.
    emitSPUpdate(MBB, MBBI, TII, dl, *this, -NumBytes);
  }

  if (STI.isTargetELF() && hasFP(MF)) {
    MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() -
                             AFI->getFramePtrSpillOffset());
  }

  AFI->setGPRCalleeSavedArea1Size(GPRCS1Size);
  AFI->setGPRCalleeSavedArea2Size(GPRCS2Size);
  AFI->setDPRCalleeSavedAreaSize(DPRCSSize);
}