本文整理汇总了C++中ARMFunctionInfo::getGPRCalleeSavedArea1Size方法的典型用法代码示例。如果您正苦于以下问题:C++ ARMFunctionInfo::getGPRCalleeSavedArea1Size方法的具体用法?C++ ARMFunctionInfo::getGPRCalleeSavedArea1Size怎么用?C++ ARMFunctionInfo::getGPRCalleeSavedArea1Size使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类ARMFunctionInfo
的用法示例。
在下文中一共展示了ARMFunctionInfo::getGPRCalleeSavedArea1Size方法的5个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: DebugLoc
void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
MachineBasicBlock::iterator MBBI = MBB.getFirstTerminator();
DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc();
MachineFrameInfo *MFI = MF.getFrameInfo();
ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
const ThumbRegisterInfo *RegInfo =
static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo());
const Thumb1InstrInfo &TII =
*static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo());
unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize();
int NumBytes = (int)MFI->getStackSize();
assert((unsigned)NumBytes >= ArgRegsSaveSize &&
"ArgRegsSaveSize is included in NumBytes");
const MCPhysReg *CSRegs = RegInfo->getCalleeSavedRegs(&MF);
unsigned FramePtr = RegInfo->getFrameRegister(MF);
if (!AFI->hasStackFrame()) {
if (NumBytes - ArgRegsSaveSize != 0)
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes - ArgRegsSaveSize);
} else {
// Unwind MBBI to point to first LDR / VLDRD.
if (MBBI != MBB.begin()) {
do
--MBBI;
while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
if (!isCSRestore(MBBI, CSRegs))
++MBBI;
}
// Move SP to start of FP callee save spill area.
NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
AFI->getGPRCalleeSavedArea2Size() +
AFI->getDPRCalleeSavedAreaSize() +
ArgRegsSaveSize);
if (AFI->shouldRestoreSPFromFP()) {
NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
// Reset SP based on frame pointer only if the stack frame extends beyond
// frame pointer stack slot, the target is ELF and the function has FP, or
// the target uses var sized objects.
if (NumBytes) {
assert(!MFI->getPristineRegs(MF).test(ARM::R4) &&
"No scratch register to restore SP from FP!");
emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
TII, *RegInfo);
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(ARM::R4));
} else
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(FramePtr));
} else {
if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tBX_RET &&
&MBB.front() != MBBI && std::prev(MBBI)->getOpcode() == ARM::tPOP) {
MachineBasicBlock::iterator PMBBI = std::prev(MBBI);
if (!tryFoldSPUpdateIntoPushPop(STI, MF, PMBBI, NumBytes))
emitSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes);
} else if (!tryFoldSPUpdateIntoPushPop(STI, MF, MBBI, NumBytes))
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
}
}
if (needPopSpecialFixUp(MF)) {
bool Done = emitPopSpecialFixUp(MBB, /* DoIt */ true);
(void)Done;
assert(Done && "Emission of the special fixup failed!?");
}
}
示例2: assert
void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
assert((MBBI->getOpcode() == ARM::tBX_RET ||
MBBI->getOpcode() == ARM::tPOP_RET) &&
"Can only insert epilog into returning blocks");
DebugLoc dl = MBBI->getDebugLoc();
MachineFrameInfo *MFI = MF.getFrameInfo();
ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
const Thumb1RegisterInfo *RegInfo =
static_cast<const Thumb1RegisterInfo*>(MF.getTarget().getRegisterInfo());
const Thumb1InstrInfo &TII =
*static_cast<const Thumb1InstrInfo*>(MF.getTarget().getInstrInfo());
unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
int NumBytes = (int)MFI->getStackSize();
const unsigned *CSRegs = RegInfo->getCalleeSavedRegs();
unsigned FramePtr = RegInfo->getFrameRegister(MF);
if (!AFI->hasStackFrame()) {
if (NumBytes != 0)
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
} else {
// Unwind MBBI to point to first LDR / VLDRD.
if (MBBI != MBB.begin()) {
do
--MBBI;
while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
if (!isCSRestore(MBBI, CSRegs))
++MBBI;
}
// Move SP to start of FP callee save spill area.
NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
AFI->getGPRCalleeSavedArea2Size() +
AFI->getDPRCalleeSavedAreaSize());
if (AFI->shouldRestoreSPFromFP()) {
NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
// Reset SP based on frame pointer only if the stack frame extends beyond
// frame pointer stack slot, the target is ELF and the function has FP, or
// the target uses var sized objects.
if (NumBytes) {
assert(MF.getRegInfo().isPhysRegUsed(ARM::R4) &&
"No scratch register to restore SP from FP!");
emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
TII, *RegInfo);
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(ARM::R4));
} else
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(FramePtr));
} else {
if (MBBI->getOpcode() == ARM::tBX_RET &&
&MBB.front() != MBBI &&
prior(MBBI)->getOpcode() == ARM::tPOP) {
MachineBasicBlock::iterator PMBBI = prior(MBBI);
emitSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes);
} else
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
}
}
if (VARegSaveSize) {
// Unlike T2 and ARM mode, the T1 pop instruction cannot restore
// to LR, and we can't pop the value directly to the PC since
// we need to update the SP after popping the value. Therefore, we
// pop the old LR into R3 as a temporary.
// Move back past the callee-saved register restoration
while (MBBI != MBB.end() && isCSRestore(MBBI, CSRegs))
++MBBI;
// Epilogue for vararg functions: pop LR to R3 and branch off it.
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)))
.addReg(ARM::R3, RegState::Define);
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, VARegSaveSize);
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tBX_RET_vararg))
.addReg(ARM::R3, RegState::Kill));
// erase the old tBX_RET instruction
MBB.erase(MBBI);
}
}
示例3: emitEpilogue
void ARMFrameLowering::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
assert(MBBI->getDesc().isReturn() &&
"Can only insert epilog into returning blocks");
unsigned RetOpcode = MBBI->getOpcode();
DebugLoc dl = MBBI->getDebugLoc();
MachineFrameInfo *MFI = MF.getFrameInfo();
ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
const TargetRegisterInfo *RegInfo = MF.getTarget().getRegisterInfo();
const ARMBaseInstrInfo &TII =
*static_cast<const ARMBaseInstrInfo*>(MF.getTarget().getInstrInfo());
assert(!AFI->isThumb1OnlyFunction() &&
"This emitEpilogue does not support Thumb1!");
bool isARM = !AFI->isThumbFunction();
unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
int NumBytes = (int)MFI->getStackSize();
unsigned FramePtr = RegInfo->getFrameRegister(MF);
if (!AFI->hasStackFrame()) {
if (NumBytes != 0)
emitSPUpdate(isARM, MBB, MBBI, dl, TII, NumBytes);
} else {
// Unwind MBBI to point to first LDR / VLDRD.
const unsigned *CSRegs = RegInfo->getCalleeSavedRegs();
if (MBBI != MBB.begin()) {
do
--MBBI;
while (MBBI != MBB.begin() && isCSRestore(MBBI, TII, CSRegs));
if (!isCSRestore(MBBI, TII, CSRegs))
++MBBI;
}
// Move SP to start of FP callee save spill area.
NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
AFI->getGPRCalleeSavedArea2Size() +
AFI->getDPRCalleeSavedAreaSize());
// Reset SP based on frame pointer only if the stack frame extends beyond
// frame pointer stack slot or target is ELF and the function has FP.
if (AFI->shouldRestoreSPFromFP()) {
NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
if (NumBytes) {
if (isARM)
emitARMRegPlusImmediate(MBB, MBBI, dl, ARM::SP, FramePtr, -NumBytes,
ARMCC::AL, 0, TII);
else {
// It's not possible to restore SP from FP in a single instruction.
// For Darwin, this looks like:
// mov sp, r7
// sub sp, #24
// This is bad, if an interrupt is taken after the mov, sp is in an
// inconsistent state.
// Use the first callee-saved register as a scratch register.
assert(MF.getRegInfo().isPhysRegUsed(ARM::R4) &&
"No scratch register to restore SP from FP!");
emitT2RegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
ARMCC::AL, 0, TII);
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(ARM::R4));
}
} else {
// Thumb2 or ARM.
if (isARM)
BuildMI(MBB, MBBI, dl, TII.get(ARM::MOVr), ARM::SP)
.addReg(FramePtr).addImm((unsigned)ARMCC::AL).addReg(0).addReg(0);
else
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(FramePtr));
}
} else if (NumBytes)
emitSPUpdate(isARM, MBB, MBBI, dl, TII, NumBytes);
// Increment past our save areas.
if (AFI->getDPRCalleeSavedAreaSize()) {
MBBI++;
// Since vpop register list cannot have gaps, there may be multiple vpop
// instructions in the epilogue.
while (MBBI->getOpcode() == ARM::VLDMDIA_UPD)
MBBI++;
}
if (AFI->getGPRCalleeSavedArea2Size()) MBBI++;
if (AFI->getGPRCalleeSavedArea1Size()) MBBI++;
}
if (RetOpcode == ARM::TCRETURNdi || RetOpcode == ARM::TCRETURNdiND ||
RetOpcode == ARM::TCRETURNri || RetOpcode == ARM::TCRETURNriND) {
// Tail call return: adjust the stack pointer and jump to callee.
MBBI = MBB.getLastNonDebugInstr();
MachineOperand &JumpTarget = MBBI->getOperand(0);
// Jump to label or value in register.
if (RetOpcode == ARM::TCRETURNdi || RetOpcode == ARM::TCRETURNdiND) {
unsigned TCOpcode = (RetOpcode == ARM::TCRETURNdi)
? (STI.isThumb() ? ARM::tTAILJMPd : ARM::TAILJMPd)
: (STI.isThumb() ? ARM::tTAILJMPdND : ARM::TAILJMPdND);
MachineInstrBuilder MIB = BuildMI(MBB, MBBI, dl, TII.get(TCOpcode));
//.........这里部分代码省略.........
示例4: assert
void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
assert((MBBI->getOpcode() == ARM::tBX_RET ||
MBBI->getOpcode() == ARM::tPOP_RET) &&
"Can only insert epilog into returning blocks");
DebugLoc dl = MBBI->getDebugLoc();
MachineFrameInfo *MFI = MF.getFrameInfo();
ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
const ThumbRegisterInfo *RegInfo =
static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo());
const Thumb1InstrInfo &TII =
*static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo());
unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize();
int NumBytes = (int)MFI->getStackSize();
assert((unsigned)NumBytes >= ArgRegsSaveSize &&
"ArgRegsSaveSize is included in NumBytes");
const MCPhysReg *CSRegs = RegInfo->getCalleeSavedRegs(&MF);
unsigned FramePtr = RegInfo->getFrameRegister(MF);
if (!AFI->hasStackFrame()) {
if (NumBytes - ArgRegsSaveSize != 0)
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes - ArgRegsSaveSize);
} else {
// Unwind MBBI to point to first LDR / VLDRD.
if (MBBI != MBB.begin()) {
do
--MBBI;
while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
if (!isCSRestore(MBBI, CSRegs))
++MBBI;
}
// Move SP to start of FP callee save spill area.
NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
AFI->getGPRCalleeSavedArea2Size() +
AFI->getDPRCalleeSavedAreaSize() +
ArgRegsSaveSize);
if (AFI->shouldRestoreSPFromFP()) {
NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
// Reset SP based on frame pointer only if the stack frame extends beyond
// frame pointer stack slot, the target is ELF and the function has FP, or
// the target uses var sized objects.
if (NumBytes) {
assert(MF.getRegInfo().isPhysRegUsed(ARM::R4) &&
"No scratch register to restore SP from FP!");
emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
TII, *RegInfo);
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(ARM::R4));
} else
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
ARM::SP)
.addReg(FramePtr));
} else {
if (MBBI->getOpcode() == ARM::tBX_RET &&
&MBB.front() != MBBI &&
std::prev(MBBI)->getOpcode() == ARM::tPOP) {
MachineBasicBlock::iterator PMBBI = std::prev(MBBI);
if (!tryFoldSPUpdateIntoPushPop(STI, MF, PMBBI, NumBytes))
emitSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes);
} else if (!tryFoldSPUpdateIntoPushPop(STI, MF, MBBI, NumBytes))
emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
}
}
bool IsV4PopReturn = false;
for (const CalleeSavedInfo &CSI : MFI->getCalleeSavedInfo())
if (CSI.getReg() == ARM::LR)
IsV4PopReturn = true;
IsV4PopReturn &= STI.hasV4TOps() && !STI.hasV5TOps();
// Unlike T2 and ARM mode, the T1 pop instruction cannot restore
// to LR, and we can't pop the value directly to the PC since
// we need to update the SP after popping the value. So instead
// we have to emit:
// POP {r3}
// ADD sp, #offset
// BX r3
// If this would clobber a return value, then generate this sequence instead:
// MOV ip, r3
// POP {r3}
// ADD sp, #offset
// MOV lr, r3
// MOV r3, ip
// BX lr
if (ArgRegsSaveSize || IsV4PopReturn) {
// Get the last instruction, tBX_RET
MBBI = MBB.getLastNonDebugInstr();
assert (MBBI->getOpcode() == ARM::tBX_RET);
DebugLoc dl = MBBI->getDebugLoc();
if (AFI->getReturnRegsCount() <= 3) {
// Epilogue: pop saved LR to R3 and branch off it.
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)))
.addReg(ARM::R3, RegState::Define);
//.........这里部分代码省略.........
示例5: prior
void Thumb1RegisterInfo::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
MachineBasicBlock::iterator MBBI = prior(MBB.end());
assert((MBBI->getOpcode() == ARM::tBX_RET ||
MBBI->getOpcode() == ARM::tPOP_RET) &&
"Can only insert epilog into returning blocks");
DebugLoc dl = MBBI->getDebugLoc();
MachineFrameInfo *MFI = MF.getFrameInfo();
ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
int NumBytes = (int)MFI->getStackSize();
if (!AFI->hasStackFrame()) {
if (NumBytes != 0)
emitSPUpdate(MBB, MBBI, TII, dl, *this, NumBytes);
} else {
// Unwind MBBI to point to first LDR / VLDRD.
const unsigned *CSRegs = getCalleeSavedRegs();
if (MBBI != MBB.begin()) {
do
--MBBI;
while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
if (!isCSRestore(MBBI, CSRegs))
++MBBI;
}
// Move SP to start of FP callee save spill area.
NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
AFI->getGPRCalleeSavedArea2Size() +
AFI->getDPRCalleeSavedAreaSize());
if (hasFP(MF)) {
NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
// Reset SP based on frame pointer only if the stack frame extends beyond
// frame pointer stack slot or target is ELF and the function has FP.
if (NumBytes)
emitThumbRegPlusImmediate(MBB, MBBI, ARM::SP, FramePtr, -NumBytes,
TII, *this, dl);
else
BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVtgpr2gpr), ARM::SP)
.addReg(FramePtr);
} else {
if (MBBI->getOpcode() == ARM::tBX_RET &&
&MBB.front() != MBBI &&
prior(MBBI)->getOpcode() == ARM::tPOP) {
MachineBasicBlock::iterator PMBBI = prior(MBBI);
emitSPUpdate(MBB, PMBBI, TII, dl, *this, NumBytes);
} else
emitSPUpdate(MBB, MBBI, TII, dl, *this, NumBytes);
}
}
if (VARegSaveSize) {
// Epilogue for vararg functions: pop LR to R3 and branch off it.
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)))
.addReg(0) // No write back.
.addReg(ARM::R3, RegState::Define);
emitSPUpdate(MBB, MBBI, TII, dl, *this, VARegSaveSize);
BuildMI(MBB, MBBI, dl, TII.get(ARM::tBX_RET_vararg))
.addReg(ARM::R3, RegState::Kill);
MBB.erase(MBBI);
}
}