C++ ARMFunctionInfo::setGPRCalleeSavedArea1Offset方法代码示例

本文整理汇总了C++中ARMFunctionInfo::setGPRCalleeSavedArea1Offset方法的典型用法代码示例。如果您正苦于以下问题：C++ ARMFunctionInfo::setGPRCalleeSavedArea1Offset方法的具体用法？C++ ARMFunctionInfo::setGPRCalleeSavedArea1Offset怎么用？C++ ARMFunctionInfo::setGPRCalleeSavedArea1Offset使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类ARMFunctionInfo的用法示例。

在下文中一共展示了ARMFunctionInfo::setGPRCalleeSavedArea1Offset方法的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: assert

void Thumb1FrameLowering::emitPrologue(MachineFunction &MF,
                                       MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = MBB.begin();
  MachineFrameInfo  *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  MachineModuleInfo &MMI = MF.getMMI();
  const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo();
  const ThumbRegisterInfo *RegInfo =
      static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo());
  const Thumb1InstrInfo &TII =
      *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo());

  unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize();
  unsigned NumBytes = MFI->getStackSize();
  assert(NumBytes >= ArgRegsSaveSize &&
         "ArgRegsSaveSize is included in NumBytes");
  const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();

  // Debug location must be unknown since the first debug location is used
  // to determine the end of the prologue.
  DebugLoc dl;
  
  unsigned FramePtr = RegInfo->getFrameRegister(MF);
  unsigned BasePtr = RegInfo->getBaseRegister();
  int CFAOffset = 0;

  // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4.
  NumBytes = (NumBytes + 3) & ~3;
  MFI->setStackSize(NumBytes);

  // Determine the sizes of each callee-save spill areas and record which frame
  // belongs to which callee-save spill areas.
  unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0;
  int FramePtrSpillFI = 0;

  if (ArgRegsSaveSize) {
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -ArgRegsSaveSize,
                 MachineInstr::FrameSetup);
    CFAOffset -= ArgRegsSaveSize;
    unsigned CFIIndex = MMI.addFrameInst(
        MCCFIInstruction::createDefCfaOffset(nullptr, CFAOffset));
    BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
        .addCFIIndex(CFIIndex)
        .setMIFlags(MachineInstr::FrameSetup);
  }

  if (!AFI->hasStackFrame()) {
    if (NumBytes - ArgRegsSaveSize != 0) {
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -(NumBytes - ArgRegsSaveSize),
                   MachineInstr::FrameSetup);
      CFAOffset -= NumBytes - ArgRegsSaveSize;
      unsigned CFIIndex = MMI.addFrameInst(
          MCCFIInstruction::createDefCfaOffset(nullptr, CFAOffset));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
    }
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (STI.isTargetMachO()) {
        GPRCS2Size += 4;
        break;
      }
      // fallthrough
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      GPRCS1Size += 4;
      break;
    default:
      DPRCSSize += 8;
    }
  }

  if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) {
    ++MBBI;
  }

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - ArgRegsSaveSize - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  bool HasFP = hasFP(MF);
  if (HasFP)
    AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) +
                                NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
//.........这里部分代码省略.........

开发者ID:alessandrostone，项目名称:metashell，代码行数:101，代码来源:Thumb1FrameLowering.cpp

示例2: assert

void Thumb1FrameLowering::emitPrologue(MachineFunction &MF,
                                       MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = MBB.begin();
  MachineFrameInfo &MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  MachineModuleInfo &MMI = MF.getMMI();
  const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo();
  const ThumbRegisterInfo *RegInfo =
      static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo());
  const Thumb1InstrInfo &TII =
      *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo());

  unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize();
  unsigned NumBytes = MFI.getStackSize();
  assert(NumBytes >= ArgRegsSaveSize &&
         "ArgRegsSaveSize is included in NumBytes");
  const std::vector<CalleeSavedInfo> &CSI = MFI.getCalleeSavedInfo();

  // Debug location must be unknown since the first debug location is used
  // to determine the end of the prologue.
  DebugLoc dl;
  
  unsigned FramePtr = RegInfo->getFrameRegister(MF);
  unsigned BasePtr = RegInfo->getBaseRegister();
  int CFAOffset = 0;

  // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4.
  NumBytes = (NumBytes + 3) & ~3;
  MFI.setStackSize(NumBytes);

  // Determine the sizes of each callee-save spill areas and record which frame
  // belongs to which callee-save spill areas.
  unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0;
  int FramePtrSpillFI = 0;

  if (ArgRegsSaveSize) {
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -ArgRegsSaveSize,
                 MachineInstr::FrameSetup);
    CFAOffset -= ArgRegsSaveSize;
    unsigned CFIIndex = MF.addFrameInst(
        MCCFIInstruction::createDefCfaOffset(nullptr, CFAOffset));
    BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
        .addCFIIndex(CFIIndex)
        .setMIFlags(MachineInstr::FrameSetup);
  }

  if (!AFI->hasStackFrame()) {
    if (NumBytes - ArgRegsSaveSize != 0) {
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -(NumBytes - ArgRegsSaveSize),
                   MachineInstr::FrameSetup);
      CFAOffset -= NumBytes - ArgRegsSaveSize;
      unsigned CFIIndex = MF.addFrameInst(
          MCCFIInstruction::createDefCfaOffset(nullptr, CFAOffset));
      BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION))
          .addCFIIndex(CFIIndex)
          .setMIFlags(MachineInstr::FrameSetup);
    }
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (STI.splitFramePushPop(MF)) {
        GPRCS2Size += 4;
        break;
      }
      LLVM_FALLTHROUGH;
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      GPRCS1Size += 4;
      break;
    default:
      DPRCSSize += 8;
    }
  }

  if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) {
    ++MBBI;
  }

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - ArgRegsSaveSize - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  bool HasFP = hasFP(MF);
  if (HasFP)
    AFI->setFramePtrSpillOffset(MFI.getObjectOffset(FramePtrSpillFI) +
                                NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
//.........这里部分代码省略.........

开发者ID:a565109863，项目名称:src，代码行数:101，代码来源:Thumb1FrameLowering.cpp

示例3: emitPrologue

void ARMFrameLowering::emitPrologue(MachineFunction &MF) const {
  MachineBasicBlock &MBB = MF.front();
  MachineBasicBlock::iterator MBBI = MBB.begin();
  MachineFrameInfo  *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  const ARMBaseRegisterInfo *RegInfo =
    static_cast<const ARMBaseRegisterInfo*>(MF.getTarget().getRegisterInfo());
  const ARMBaseInstrInfo &TII =
    *static_cast<const ARMBaseInstrInfo*>(MF.getTarget().getInstrInfo());
  assert(!AFI->isThumb1OnlyFunction() &&
         "This emitPrologue does not support Thumb1!");
  bool isARM = !AFI->isThumbFunction();
  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  unsigned NumBytes = MFI->getStackSize();
  const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
  DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc();
  unsigned FramePtr = RegInfo->getFrameRegister(MF);

  // Determine the sizes of each callee-save spill areas and record which frame
  // belongs to which callee-save spill areas.
  unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0;
  int FramePtrSpillFI = 0;

  // Allocate the vararg register save area. This is not counted in NumBytes.
  if (VARegSaveSize)
    emitSPUpdate(isARM, MBB, MBBI, dl, TII, -VARegSaveSize,
                 MachineInstr::FrameSetup);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(isARM, MBB, MBBI, dl, TII, -NumBytes,
                   MachineInstr::FrameSetup);
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      AFI->addGPRCalleeSavedArea1Frame(FI);
      GPRCS1Size += 4;
      break;
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      if (STI.isTargetDarwin()) {
        AFI->addGPRCalleeSavedArea2Frame(FI);
        GPRCS2Size += 4;
      } else {
        AFI->addGPRCalleeSavedArea1Frame(FI);
        GPRCS1Size += 4;
      }
      break;
    default:
      AFI->addDPRCalleeSavedAreaFrame(FI);
      DPRCSSize += 8;
    }
  }

  // Move past area 1.
  if (GPRCS1Size > 0) MBBI++;

  // Set FP to point to the stack slot that contains the previous FP.
  // For Darwin, FP is R7, which has now been stored in spill area 1.
  // Otherwise, if this is not Darwin, all the callee-saved registers go
  // into spill area 1, including the FP in R11.  In either case, it is
  // now safe to emit this assignment.
  bool HasFP = hasFP(MF);
  if (HasFP) {
    unsigned ADDriOpc = !AFI->isThumbFunction() ? ARM::ADDri : ARM::t2ADDri;
    MachineInstrBuilder MIB =
      BuildMI(MBB, MBBI, dl, TII.get(ADDriOpc), FramePtr)
      .addFrameIndex(FramePtrSpillFI).addImm(0)
      .setMIFlag(MachineInstr::FrameSetup);
    AddDefaultCC(AddDefaultPred(MIB));
  }

  // Move past area 2.
  if (GPRCS2Size > 0) MBBI++;

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  if (HasFP)
    AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) +
                                NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
  AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset);
  AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset);
//.........这里部分代码省略.........

开发者ID:ACSOP，项目名称:android_external_llvm，代码行数:101，代码来源:ARMFrameLowering.cpp

示例4: DebugLoc

void Thumb1FrameLowering::emitPrologue(MachineFunction &MF) const {
  MachineBasicBlock &MBB = MF.front();
  MachineBasicBlock::iterator MBBI = MBB.begin();
  MachineFrameInfo  *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  const Thumb1RegisterInfo *RegInfo =
    static_cast<const Thumb1RegisterInfo*>(MF.getTarget().getRegisterInfo());
  const Thumb1InstrInfo &TII =
    *static_cast<const Thumb1InstrInfo*>(MF.getTarget().getInstrInfo());

  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  unsigned NumBytes = MFI->getStackSize();
  const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
  DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc();
  unsigned FramePtr = RegInfo->getFrameRegister(MF);
  unsigned BasePtr = RegInfo->getBaseRegister();

  // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4.
  NumBytes = (NumBytes + 3) & ~3;
  MFI->setStackSize(NumBytes);

  // Determine the sizes of each callee-save spill areas and record which frame
  // belongs to which callee-save spill areas.
  unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0;
  int FramePtrSpillFI = 0;

  if (VARegSaveSize)
    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -VARegSaveSize,
                 MachineInstr::FrameSetup);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, -NumBytes,
                   MachineInstr::FrameSetup);
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      AFI->addGPRCalleeSavedArea1Frame(FI);
      GPRCS1Size += 4;
      break;
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      if (STI.isTargetDarwin()) {
        AFI->addGPRCalleeSavedArea2Frame(FI);
        GPRCS2Size += 4;
      } else {
        AFI->addGPRCalleeSavedArea1Frame(FI);
        GPRCS1Size += 4;
      }
      break;
    default:
      AFI->addDPRCalleeSavedAreaFrame(FI);
      DPRCSSize += 8;
    }
  }

  if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) {
    ++MBBI;
    if (MBBI != MBB.end())
      dl = MBBI->getDebugLoc();
  }

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
  AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset);
  AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset);
  NumBytes = DPRCSOffset;

  // Adjust FP so it point to the stack slot that contains the previous FP.
  if (hasFP(MF)) {
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr)
      .addFrameIndex(FramePtrSpillFI).addImm(0)
      .setMIFlags(MachineInstr::FrameSetup));
    if (NumBytes > 508)
      // If offset is > 508 then sp cannot be adjusted in a single instruction,
      // try restoring from fp instead.
      AFI->setShouldRestoreSPFromFP(true);
  }

  if (NumBytes)
    // Insert it after all the callee-save spills.
//.........这里部分代码省略.........

开发者ID:，项目名称:，代码行数:101，代码来源:

示例5: emitSPUpdate

void Thumb1RegisterInfo::emitPrologue(MachineFunction &MF) const {
  MachineBasicBlock &MBB = MF.front();
  MachineBasicBlock::iterator MBBI = MBB.begin();
  MachineFrameInfo  *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  unsigned NumBytes = MFI->getStackSize();
  const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
  DebugLoc dl = (MBBI != MBB.end() ?
                 MBBI->getDebugLoc() : DebugLoc::getUnknownLoc());

  // Thumb add/sub sp, imm8 instructions implicitly multiply the offset by 4.
  NumBytes = (NumBytes + 3) & ~3;
  MFI->setStackSize(NumBytes);

  // Determine the sizes of each callee-save spill areas and record which frame
  // belongs to which callee-save spill areas.
  unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0;
  int FramePtrSpillFI = 0;

  if (VARegSaveSize)
    emitSPUpdate(MBB, MBBI, TII, dl, *this, -VARegSaveSize);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *this, -NumBytes);
    return;
  }

  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    int FI = CSI[i].getFrameIdx();
    switch (Reg) {
    case ARM::R4:
    case ARM::R5:
    case ARM::R6:
    case ARM::R7:
    case ARM::LR:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      AFI->addGPRCalleeSavedArea1Frame(FI);
      GPRCS1Size += 4;
      break;
    case ARM::R8:
    case ARM::R9:
    case ARM::R10:
    case ARM::R11:
      if (Reg == FramePtr)
        FramePtrSpillFI = FI;
      if (STI.isTargetDarwin()) {
        AFI->addGPRCalleeSavedArea2Frame(FI);
        GPRCS2Size += 4;
      } else {
        AFI->addGPRCalleeSavedArea1Frame(FI);
        GPRCS1Size += 4;
      }
      break;
    default:
      AFI->addDPRCalleeSavedAreaFrame(FI);
      DPRCSSize += 8;
    }
  }

  if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tPUSH) {
    ++MBBI;
    if (MBBI != MBB.end())
      dl = MBBI->getDebugLoc();
  }

  // Darwin ABI requires FP to point to the stack slot that contains the
  // previous FP.
  if (STI.isTargetDarwin() || hasFP(MF)) {
    BuildMI(MBB, MBBI, dl, TII.get(ARM::tADDrSPi), FramePtr)
      .addFrameIndex(FramePtrSpillFI).addImm(0);
  }

  // Determine starting offsets of spill areas.
  unsigned DPRCSOffset  = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize);
  unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize;
  unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size;
  AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes);
  AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset);
  AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset);
  AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset);

  NumBytes = DPRCSOffset;
  if (NumBytes) {
    // Insert it after all the callee-save spills.
    emitSPUpdate(MBB, MBBI, TII, dl, *this, -NumBytes);
  }

  if (STI.isTargetELF() && hasFP(MF)) {
    MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() -
                             AFI->getFramePtrSpillOffset());
  }

  AFI->setGPRCalleeSavedArea1Size(GPRCS1Size);
  AFI->setGPRCalleeSavedArea2Size(GPRCS2Size);
  AFI->setDPRCalleeSavedAreaSize(DPRCSSize);
}

开发者ID:，项目名称:，代码行数:100，代码来源:

注：本文中的ARMFunctionInfo::setGPRCalleeSavedArea1Offset方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。