C++ ARMFunctionInfo::getDPRCalleeSavedAreaSize方法代码示例

void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF,
                                   MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = MBB.getFirstTerminator();
  DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  const ThumbRegisterInfo *RegInfo =
      static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo());
  const Thumb1InstrInfo &TII =
      *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo());

  unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize();
  int NumBytes = (int)MFI->getStackSize();
  assert((unsigned)NumBytes >= ArgRegsSaveSize &&
         "ArgRegsSaveSize is included in NumBytes");
  const MCPhysReg *CSRegs = RegInfo->getCalleeSavedRegs(&MF);
  unsigned FramePtr = RegInfo->getFrameRegister(MF);

  if (!AFI->hasStackFrame()) {
    if (NumBytes - ArgRegsSaveSize != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes - ArgRegsSaveSize);
  } else {
    // Unwind MBBI to point to first LDR / VLDRD.
    if (MBBI != MBB.begin()) {
      do
        --MBBI;
      while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
      if (!isCSRestore(MBBI, CSRegs))
        ++MBBI;
    }

    // Move SP to start of FP callee save spill area.
    NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
                 AFI->getGPRCalleeSavedArea2Size() +
                 AFI->getDPRCalleeSavedAreaSize() +
                 ArgRegsSaveSize);

    if (AFI->shouldRestoreSPFromFP()) {
      NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
      // Reset SP based on frame pointer only if the stack frame extends beyond
      // frame pointer stack slot, the target is ELF and the function has FP, or
      // the target uses var sized objects.
      if (NumBytes) {
        assert(!MFI->getPristineRegs(MF).test(ARM::R4) &&
               "No scratch register to restore SP from FP!");
        emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
                                  TII, *RegInfo);
        AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                               ARM::SP)
          .addReg(ARM::R4));
      } else
        AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                               ARM::SP)
          .addReg(FramePtr));
    } else {
      if (MBBI != MBB.end() && MBBI->getOpcode() == ARM::tBX_RET &&
          &MBB.front() != MBBI && std::prev(MBBI)->getOpcode() == ARM::tPOP) {
        MachineBasicBlock::iterator PMBBI = std::prev(MBBI);
        if (!tryFoldSPUpdateIntoPushPop(STI, MF, PMBBI, NumBytes))
          emitSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes);
      } else if (!tryFoldSPUpdateIntoPushPop(STI, MF, MBBI, NumBytes))
        emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
    }
  }

  if (needPopSpecialFixUp(MF)) {
    bool Done = emitPopSpecialFixUp(MBB, /* DoIt */ true);
    (void)Done;
    assert(Done && "Emission of the special fixup failed!?");
  }
}

void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF,
                                   MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
  assert((MBBI->getOpcode() == ARM::tBX_RET ||
          MBBI->getOpcode() == ARM::tPOP_RET) &&
         "Can only insert epilog into returning blocks");
  DebugLoc dl = MBBI->getDebugLoc();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  const Thumb1RegisterInfo *RegInfo =
    static_cast<const Thumb1RegisterInfo*>(MF.getTarget().getRegisterInfo());
  const Thumb1InstrInfo &TII =
    *static_cast<const Thumb1InstrInfo*>(MF.getTarget().getInstrInfo());

  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  int NumBytes = (int)MFI->getStackSize();
  const unsigned *CSRegs = RegInfo->getCalleeSavedRegs();
  unsigned FramePtr = RegInfo->getFrameRegister(MF);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
  } else {
    // Unwind MBBI to point to first LDR / VLDRD.
    if (MBBI != MBB.begin()) {
      do
        --MBBI;
      while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
      if (!isCSRestore(MBBI, CSRegs))
        ++MBBI;
    }

    // Move SP to start of FP callee save spill area.
    NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
                 AFI->getGPRCalleeSavedArea2Size() +
                 AFI->getDPRCalleeSavedAreaSize());

    if (AFI->shouldRestoreSPFromFP()) {
      NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
      // Reset SP based on frame pointer only if the stack frame extends beyond
      // frame pointer stack slot, the target is ELF and the function has FP, or
      // the target uses var sized objects.
      if (NumBytes) {
        assert(MF.getRegInfo().isPhysRegUsed(ARM::R4) &&
               "No scratch register to restore SP from FP!");
        emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
                                  TII, *RegInfo);
        AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                               ARM::SP)
          .addReg(ARM::R4));
      } else
        AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                               ARM::SP)
          .addReg(FramePtr));
    } else {
      if (MBBI->getOpcode() == ARM::tBX_RET &&
          &MBB.front() != MBBI &&
          prior(MBBI)->getOpcode() == ARM::tPOP) {
        MachineBasicBlock::iterator PMBBI = prior(MBBI);
        emitSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes);
      } else
        emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
    }
  }

  if (VARegSaveSize) {
    // Unlike T2 and ARM mode, the T1 pop instruction cannot restore
    // to LR, and we can't pop the value directly to the PC since
    // we need to update the SP after popping the value. Therefore, we
    // pop the old LR into R3 as a temporary.

    // Move back past the callee-saved register restoration
    while (MBBI != MBB.end() && isCSRestore(MBBI, CSRegs))
      ++MBBI;
    // Epilogue for vararg functions: pop LR to R3 and branch off it.
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)))
      .addReg(ARM::R3, RegState::Define);

    emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, VARegSaveSize);

    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tBX_RET_vararg))
      .addReg(ARM::R3, RegState::Kill));
    // erase the old tBX_RET instruction
    MBB.erase(MBBI);
  }
}

void ARMFrameLowering::emitEpilogue(MachineFunction &MF,
                                    MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
  assert(MBBI->getDesc().isReturn() &&
         "Can only insert epilog into returning blocks");
  unsigned RetOpcode = MBBI->getOpcode();
  DebugLoc dl = MBBI->getDebugLoc();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  const TargetRegisterInfo *RegInfo = MF.getTarget().getRegisterInfo();
  const ARMBaseInstrInfo &TII =
    *static_cast<const ARMBaseInstrInfo*>(MF.getTarget().getInstrInfo());
  assert(!AFI->isThumb1OnlyFunction() &&
         "This emitEpilogue does not support Thumb1!");
  bool isARM = !AFI->isThumbFunction();

  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  int NumBytes = (int)MFI->getStackSize();
  unsigned FramePtr = RegInfo->getFrameRegister(MF);

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(isARM, MBB, MBBI, dl, TII, NumBytes);
  } else {
    // Unwind MBBI to point to first LDR / VLDRD.
    const unsigned *CSRegs = RegInfo->getCalleeSavedRegs();
    if (MBBI != MBB.begin()) {
      do
        --MBBI;
      while (MBBI != MBB.begin() && isCSRestore(MBBI, TII, CSRegs));
      if (!isCSRestore(MBBI, TII, CSRegs))
        ++MBBI;
    }

    // Move SP to start of FP callee save spill area.
    NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
                 AFI->getGPRCalleeSavedArea2Size() +
                 AFI->getDPRCalleeSavedAreaSize());

    // Reset SP based on frame pointer only if the stack frame extends beyond
    // frame pointer stack slot or target is ELF and the function has FP.
    if (AFI->shouldRestoreSPFromFP()) {
      NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
      if (NumBytes) {
        if (isARM)
          emitARMRegPlusImmediate(MBB, MBBI, dl, ARM::SP, FramePtr, -NumBytes,
                                  ARMCC::AL, 0, TII);
        else {
          // It's not possible to restore SP from FP in a single instruction.
          // For Darwin, this looks like:
          // mov sp, r7
          // sub sp, #24
          // This is bad, if an interrupt is taken after the mov, sp is in an
          // inconsistent state.
          // Use the first callee-saved register as a scratch register.
          assert(MF.getRegInfo().isPhysRegUsed(ARM::R4) &&
                 "No scratch register to restore SP from FP!");
          emitT2RegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
                                 ARMCC::AL, 0, TII);
          AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                                 ARM::SP)
            .addReg(ARM::R4));
        }
      } else {
        // Thumb2 or ARM.
        if (isARM)
          BuildMI(MBB, MBBI, dl, TII.get(ARM::MOVr), ARM::SP)
            .addReg(FramePtr).addImm((unsigned)ARMCC::AL).addReg(0).addReg(0);
        else
          AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                                 ARM::SP)
            .addReg(FramePtr));
      }
    } else if (NumBytes)
      emitSPUpdate(isARM, MBB, MBBI, dl, TII, NumBytes);

    // Increment past our save areas.
    if (AFI->getDPRCalleeSavedAreaSize()) {
      MBBI++;
      // Since vpop register list cannot have gaps, there may be multiple vpop
      // instructions in the epilogue.
      while (MBBI->getOpcode() == ARM::VLDMDIA_UPD)
        MBBI++;
    }
    if (AFI->getGPRCalleeSavedArea2Size()) MBBI++;
    if (AFI->getGPRCalleeSavedArea1Size()) MBBI++;
  }

  if (RetOpcode == ARM::TCRETURNdi || RetOpcode == ARM::TCRETURNdiND ||
      RetOpcode == ARM::TCRETURNri || RetOpcode == ARM::TCRETURNriND) {
    // Tail call return: adjust the stack pointer and jump to callee.
    MBBI = MBB.getLastNonDebugInstr();
    MachineOperand &JumpTarget = MBBI->getOperand(0);

    // Jump to label or value in register.
    if (RetOpcode == ARM::TCRETURNdi || RetOpcode == ARM::TCRETURNdiND) {
      unsigned TCOpcode = (RetOpcode == ARM::TCRETURNdi)
        ? (STI.isThumb() ? ARM::tTAILJMPd : ARM::TAILJMPd)
        : (STI.isThumb() ? ARM::tTAILJMPdND : ARM::TAILJMPdND);
      MachineInstrBuilder MIB = BuildMI(MBB, MBBI, dl, TII.get(TCOpcode));
//.........这里部分代码省略.........

void Thumb1FrameLowering::emitEpilogue(MachineFunction &MF,
                                   MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
  assert((MBBI->getOpcode() == ARM::tBX_RET ||
          MBBI->getOpcode() == ARM::tPOP_RET) &&
         "Can only insert epilog into returning blocks");
  DebugLoc dl = MBBI->getDebugLoc();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  const ThumbRegisterInfo *RegInfo =
      static_cast<const ThumbRegisterInfo *>(STI.getRegisterInfo());
  const Thumb1InstrInfo &TII =
      *static_cast<const Thumb1InstrInfo *>(STI.getInstrInfo());

  unsigned ArgRegsSaveSize = AFI->getArgRegsSaveSize();
  int NumBytes = (int)MFI->getStackSize();
  assert((unsigned)NumBytes >= ArgRegsSaveSize &&
         "ArgRegsSaveSize is included in NumBytes");
  const MCPhysReg *CSRegs = RegInfo->getCalleeSavedRegs(&MF);
  unsigned FramePtr = RegInfo->getFrameRegister(MF);

  if (!AFI->hasStackFrame()) {
    if (NumBytes - ArgRegsSaveSize != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes - ArgRegsSaveSize);
  } else {
    // Unwind MBBI to point to first LDR / VLDRD.
    if (MBBI != MBB.begin()) {
      do
        --MBBI;
      while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
      if (!isCSRestore(MBBI, CSRegs))
        ++MBBI;
    }

    // Move SP to start of FP callee save spill area.
    NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
                 AFI->getGPRCalleeSavedArea2Size() +
                 AFI->getDPRCalleeSavedAreaSize() +
                 ArgRegsSaveSize);

    if (AFI->shouldRestoreSPFromFP()) {
      NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
      // Reset SP based on frame pointer only if the stack frame extends beyond
      // frame pointer stack slot, the target is ELF and the function has FP, or
      // the target uses var sized objects.
      if (NumBytes) {
        assert(MF.getRegInfo().isPhysRegUsed(ARM::R4) &&
               "No scratch register to restore SP from FP!");
        emitThumbRegPlusImmediate(MBB, MBBI, dl, ARM::R4, FramePtr, -NumBytes,
                                  TII, *RegInfo);
        AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                               ARM::SP)
          .addReg(ARM::R4));
      } else
        AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr),
                               ARM::SP)
          .addReg(FramePtr));
    } else {
      if (MBBI->getOpcode() == ARM::tBX_RET &&
          &MBB.front() != MBBI &&
          std::prev(MBBI)->getOpcode() == ARM::tPOP) {
        MachineBasicBlock::iterator PMBBI = std::prev(MBBI);
        if (!tryFoldSPUpdateIntoPushPop(STI, MF, PMBBI, NumBytes))
          emitSPUpdate(MBB, PMBBI, TII, dl, *RegInfo, NumBytes);
      } else if (!tryFoldSPUpdateIntoPushPop(STI, MF, MBBI, NumBytes))
        emitSPUpdate(MBB, MBBI, TII, dl, *RegInfo, NumBytes);
    }
  }

  bool IsV4PopReturn = false;
  for (const CalleeSavedInfo &CSI : MFI->getCalleeSavedInfo())
    if (CSI.getReg() == ARM::LR)
      IsV4PopReturn = true;
  IsV4PopReturn &= STI.hasV4TOps() && !STI.hasV5TOps();

  // Unlike T2 and ARM mode, the T1 pop instruction cannot restore
  // to LR, and we can't pop the value directly to the PC since
  // we need to update the SP after popping the value. So instead
  // we have to emit:
  //   POP {r3}
  //   ADD sp, #offset
  //   BX r3
  // If this would clobber a return value, then generate this sequence instead:
  //   MOV ip, r3
  //   POP {r3}
  //   ADD sp, #offset
  //   MOV lr, r3
  //   MOV r3, ip
  //   BX lr
  if (ArgRegsSaveSize || IsV4PopReturn) {
    // Get the last instruction, tBX_RET
    MBBI = MBB.getLastNonDebugInstr();
    assert (MBBI->getOpcode() == ARM::tBX_RET);
    DebugLoc dl = MBBI->getDebugLoc();

    if (AFI->getReturnRegsCount() <= 3) {
      // Epilogue: pop saved LR to R3 and branch off it. 
      AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)))
        .addReg(ARM::R3, RegState::Define);

//.........这里部分代码省略.........

void Thumb1RegisterInfo::emitEpilogue(MachineFunction &MF,
                                      MachineBasicBlock &MBB) const {
  MachineBasicBlock::iterator MBBI = prior(MBB.end());
  assert((MBBI->getOpcode() == ARM::tBX_RET ||
          MBBI->getOpcode() == ARM::tPOP_RET) &&
         "Can only insert epilog into returning blocks");
  DebugLoc dl = MBBI->getDebugLoc();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>();
  unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize();
  int NumBytes = (int)MFI->getStackSize();

  if (!AFI->hasStackFrame()) {
    if (NumBytes != 0)
      emitSPUpdate(MBB, MBBI, TII, dl, *this, NumBytes);
  } else {
    // Unwind MBBI to point to first LDR / VLDRD.
    const unsigned *CSRegs = getCalleeSavedRegs();
    if (MBBI != MBB.begin()) {
      do
        --MBBI;
      while (MBBI != MBB.begin() && isCSRestore(MBBI, CSRegs));
      if (!isCSRestore(MBBI, CSRegs))
        ++MBBI;
    }

    // Move SP to start of FP callee save spill area.
    NumBytes -= (AFI->getGPRCalleeSavedArea1Size() +
                 AFI->getGPRCalleeSavedArea2Size() +
                 AFI->getDPRCalleeSavedAreaSize());

    if (hasFP(MF)) {
      NumBytes = AFI->getFramePtrSpillOffset() - NumBytes;
      // Reset SP based on frame pointer only if the stack frame extends beyond
      // frame pointer stack slot or target is ELF and the function has FP.
      if (NumBytes)
        emitThumbRegPlusImmediate(MBB, MBBI, ARM::SP, FramePtr, -NumBytes,
                                  TII, *this, dl);
      else
        BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVtgpr2gpr), ARM::SP)
          .addReg(FramePtr);
    } else {
      if (MBBI->getOpcode() == ARM::tBX_RET &&
          &MBB.front() != MBBI &&
          prior(MBBI)->getOpcode() == ARM::tPOP) {
        MachineBasicBlock::iterator PMBBI = prior(MBBI);
        emitSPUpdate(MBB, PMBBI, TII, dl, *this, NumBytes);
      } else
        emitSPUpdate(MBB, MBBI, TII, dl, *this, NumBytes);
    }
  }

  if (VARegSaveSize) {
    // Epilogue for vararg functions: pop LR to R3 and branch off it.
    AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tPOP)))
      .addReg(0) // No write back.
      .addReg(ARM::R3, RegState::Define);

    emitSPUpdate(MBB, MBBI, TII, dl, *this, VARegSaveSize);

    BuildMI(MBB, MBBI, dl, TII.get(ARM::tBX_RET_vararg))
      .addReg(ARM::R3, RegState::Kill);
    MBB.erase(MBBI);
  }
}