本文整理汇总了C++中PCB_BASE_FRAME::GetToolId方法的典型用法代码示例。如果您正苦于以下问题：C++ PCB_BASE_FRAME::GetToolId方法的具体用法？C++ PCB_BASE_FRAME::GetToolId怎么用？C++ PCB_BASE_FRAME::GetToolId使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PCB_BASE_FRAME的用法示例。
在下文中一共展示了PCB_BASE_FRAME::GetToolId方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: Draw
//.........这里部分代码省略.........
if( color == BLACK ) // Not on a visible copper layer (i.e. still nothing to show)
{
// If the pad is on only one tech layer, use the layer color else use DARKGRAY
LSET mask_non_copper_layers = m_layerMask & ~LSET::AllCuMask();
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
mask_non_copper_layers &= brd->GetVisibleLayers();
#endif
LAYER_ID pad_layer = mask_non_copper_layers.ExtractLayer();
switch( (int) pad_layer )
{
case UNDEFINED_LAYER: // More than one layer
color = DARKGRAY;
break;
case UNSELECTED_LAYER: // Shouldn't really happen...
break;
default:
color = brd->GetLayerColor( pad_layer );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = pad_layer;
#endif
}
}
// if SMD or connector pad and high contrast mode
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
( GetAttribute() == PAD_SMD || GetAttribute() == PAD_CONN ) &&
displ_opts && displ_opts->m_ContrastModeDisplay )
{
// when routing tracks
if( frame->GetToolId() == ID_TRACK_BUTT )
{
LAYER_ID routeTop = screen->m_Route_Layer_TOP;
LAYER_ID routeBot = screen->m_Route_Layer_BOTTOM;
// if routing between copper and component layers,
// or the current layer is one of said 2 external copper layers,
// then highlight only the current layer.
if( ( screen->m_Active_Layer == F_Cu || screen->m_Active_Layer == B_Cu ) ||
( routeTop==F_Cu && routeBot==B_Cu ) ||
( routeTop==B_Cu && routeBot==F_Cu )
)
{
if( !IsOnLayer( screen->m_Active_Layer ) )
ColorTurnToDarkDarkGray( &color );
}
// else routing between an internal signal layer and some other
// layer. Grey out all PAD_SMD pads not on current or the single
// selected external layer.
else if( !IsOnLayer( screen->m_Active_Layer )
&& !IsOnLayer( routeTop )
&& !IsOnLayer( routeBot ) )
{
ColorTurnToDarkDarkGray( &color );
}
}
// when not edting tracks, show PAD_SMD components not on active layer
// as greyed out
else
{
if( !IsOnLayer( screen->m_Active_Layer ) )
ColorTurnToDarkDarkGray( &color );
}示例2: Draw
//.........这里部分代码省略.........
case DRAW_LAYER:
color = brd->GetLayerColor( DRAW_N );
break;
case COMMENT_LAYER:
color = brd->GetLayerColor( COMMENT_N );
break;
case ECO1_LAYER:
color = brd->GetLayerColor( ECO1_N );
break;
case ECO2_LAYER:
color = brd->GetLayerColor( ECO2_N );
break;
case EDGE_LAYER:
color = brd->GetLayerColor( EDGE_N );
break;
default:
color = DARKGRAY;
break;
}
}
// if PAD_SMD pad and high contrast mode
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
( GetAttribute() == PAD_SMD || GetAttribute() == PAD_CONN ) &&
DisplayOpt.ContrastModeDisplay )
{
// when routing tracks
if( frame && frame->GetToolId() == ID_TRACK_BUTT )
{
int routeTop = screen->m_Route_Layer_TOP;
int routeBot = screen->m_Route_Layer_BOTTOM;
// if routing between copper and component layers,
// or the current layer is one of said 2 external copper layers,
// then highlight only the current layer.
if( ( ( 1 << routeTop ) | ( 1 << routeBot ) ) == ( LAYER_BACK | LAYER_FRONT )
|| ( ( 1 << screen->m_Active_Layer ) & ( LAYER_BACK | LAYER_FRONT ) ) )
{
if( !IsOnLayer( screen->m_Active_Layer ) )
{
color &= ~MASKCOLOR;
color |= DARKDARKGRAY;
}
}
// else routing between an internal signal layer and some other
// layer. Grey out all PAD_SMD pads not on current or the single
// selected external layer.
else if( !IsOnLayer( screen->m_Active_Layer )
&& !IsOnLayer( routeTop )
&& !IsOnLayer( routeBot ) )
{
color &= ~MASKCOLOR;
color |= DARKDARKGRAY;
}
}
// when not edting tracks, show PAD_SMD components not on active layer
// as greyed out
else
{
if( !IsOnLayer( screen->m_Active_Layer ) )