本文整理汇总了C++中ISceneManager::addAnimatedMeshNode方法的典型用法代码示例。如果您正苦于以下问题：C++ ISceneManager::addAnimatedMeshNode方法的具体用法？C++ ISceneManager::addAnimatedMeshNode怎么用？C++ ISceneManager::addAnimatedMeshNode使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类ISceneManager的用法示例。
在下文中一共展示了ISceneManager::addAnimatedMeshNode方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: main
int main()
{
//int avg = 2 * 90 + 3 * 88 + 4 * 87 + 3 * 84 + 4 * 92 + 2 * 93 + 2 * 83 + 2 * 80 + 2 * 95;
//std::cout << "Avg : " << avg << std::endl;
SDeviceContextSettings settings;
settings.MultiSamplingCount = 4;
settings.MultiSamplingQuality = 32;
IDevice* device = createDevice(EDT_DIRECT3D11, 800, 600, EWS_NONE, true, settings);
IVideoDriver* driver = device->getVideoDriver();
ISceneManager* smgr = device->getSceneManager();
IMeshManager* meshManager = driver->getMeshManager();
IMaterialManager* materialManager = driver->getMaterialManager();
IResourceGroupManager* resourceGroupManager = driver->getResourceGroupManager();
resourceGroupManager->init("Resources.cfg");
resourceGroupManager->loadResourceGroup("General");
ISimpleMesh* cubeMesh = meshManager->createCubeMesh("cube1");
IMeshNode* cubeMeshNode = smgr->addMeshNode(cubeMesh, nullptr, nullptr, XMFLOAT3(0, 3.0f, 0));
cubeMeshNode->setMaterialName("test/material01");
//cubeMeshNode->remove();
ISimpleMesh* planeMesh = meshManager->createPlaneMesh("plane1", 10.0, 10.0f, 50, 50, 10.0f, 10.0f);
IMeshNode* planeMeshNode = smgr->addMeshNode(planeMesh, nullptr);
planeMeshNode->setMaterialName("test/ground_material");
IAnimatedMesh* animMesh = meshManager->getAnimatedMesh("lxq.mesh");
IAnimatedMeshNode* animNode = smgr->addAnimatedMeshNode(animMesh);
animNode->scale(0.02f, 0.02f, 0.02f);
IModelMesh* heroMesh = meshManager->getModelMesh("hero.mesh");
IMeshNode* heroNode = smgr->addModelMeshNode(heroMesh);
heroNode->scale(0.01f, 0.01f, 0.01f);
heroNode->translate(2.0f, 0.5f, 0);
// create sampler state
SSamplerDesc samplerDesc;
samplerDesc.Filter = ESF_FILTER_MIN_MAG_MIP_LINEAR;
samplerDesc.AddressU = EAM_WRAP;
samplerDesc.AddressV = EAM_WRAP;
samplerDesc.AddressW = EAM_WRAP;
ISampler* sampler = driver->getSamplerManager()->create(std::string("sampler1"), samplerDesc);
IPipeline* pipeline = driver->getPipelineManager()->get("test/pipeline01");
//pipeline->setSampler(std::string("sampleType"), sampler);
ILightNode* light = smgr->addLightNode(1);
light->setType(ELT_POINT);
light->setAmbient(XMFLOAT4(0.5f, 0.5f, 0.5f, 1.0f));
light->setPosition(2.0f, 5.0f, -3.0f);
light->setSpecular(XMFLOAT4(1.0f, 1.0f, 1.0f, 32.0f));
light->setDiffuse(XMFLOAT4(0.8f, 0.8f, 0.8f, 1.0f));
light->setAttenuation(1.0f, 0.0f, 0.0f);
light->setRange(100.0f);
materialManager->destroy(std::string("test/material02"));
//ICameraNode* camera = smgr->addFpsCameraNode(1, nullptr, XMFLOAT3(0, 1.0f, -4.0f), XMFLOAT3(0, 1.0f, 0.0f));
ICameraNode* camera = smgr->addFpsCameraNode(1, nullptr, XMFLOAT3(0, 1.0f, -4.0f), XMFLOAT3(0, 1.0f, 0.0f));
f32 rotx = 0;
f32 roty = 0;
f32 rotz = 0;
char caption[200];
//FILE* fp = fopen("log.txt", "w");
ITimer* timer = device->createTimer();
timer->reset();
while (device->run())
{
const float clearColor[] = { 0.0f, 0.0f, 0.0f, 1.0f };
driver->beginScene(true, true, clearColor);
float dt = timer->tick();
rotx += dt * 2.0f;
roty += dt * 1.0f;
rotz += dt * 0.5f;
if (rotx > XM_2PI) rotx -= XM_2PI;
if (roty > XM_2PI) roty -= XM_2PI;
if (rotz > XM_2PI) rotz -= XM_2PI;
XMMATRIX Mx = XMMatrixRotationX(rotx);
XMMATRIX My = XMMatrixRotationY(roty);
XMMATRIX Mz = XMMatrixRotationZ(rotz);
XMMATRIX rotM = Mx * My * Mz;
cubeMeshNode->setOrientation(rotM);
// heroNode->yaw(dt);
animNode->addTime(dt * 3000.0f);
updateCamera(camera, dt);
// std::cout << dt << std::endl;
smgr->drawAll();
//.........这里部分代码省略.........