C++ GrDrawState::setState方法代码示例

////////////////////////////////////////////////////////////////////////////////
// Create a 1-bit clip mask in the stencil buffer. 'devClipBounds' are in device
// (as opposed to canvas) coordinates
bool GrClipMaskManager::createStencilClipMask(InitialState initialState,
                                              const ElementList& elements,
                                              const SkIRect& clipSpaceIBounds,
                                              const SkIPoint& clipSpaceToStencilOffset) {

    GrAssert(kNone_ClipMaskType == fCurrClipMaskType);

    GrDrawState* drawState = fGpu->drawState();
    GrAssert(drawState->isClipState());

    GrRenderTarget* rt = drawState->getRenderTarget();
    GrAssert(NULL != rt);

    // TODO: dynamically attach a SB when needed.
    GrStencilBuffer* stencilBuffer = rt->getStencilBuffer();
    if (NULL == stencilBuffer) {
        return false;
    }
    int32_t genID = elements.tail()->getGenID();

    if (stencilBuffer->mustRenderClip(genID, clipSpaceIBounds, clipSpaceToStencilOffset)) {

        stencilBuffer->setLastClip(genID, clipSpaceIBounds, clipSpaceToStencilOffset);

        GrDrawTarget::AutoGeometryAndStatePush agasp(fGpu, GrDrawTarget::kReset_ASRInit);
        drawState = fGpu->drawState();
        drawState->setRenderTarget(rt);

        // We set the current clip to the bounds so that our recursive draws are scissored to them.
        SkIRect stencilSpaceIBounds(clipSpaceIBounds);
        stencilSpaceIBounds.offset(clipSpaceToStencilOffset);
        GrDrawTarget::AutoClipRestore acr(fGpu, stencilSpaceIBounds);
        drawState->enableState(GrDrawState::kClip_StateBit);

        // Set the matrix so that rendered clip elements are transformed from clip to stencil space.
        SkVector translate = {
            SkIntToScalar(clipSpaceToStencilOffset.fX),
            SkIntToScalar(clipSpaceToStencilOffset.fY)
        };
        drawState->viewMatrix()->setTranslate(translate);

#if !VISUALIZE_COMPLEX_CLIP
        drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
#endif

        int clipBit = stencilBuffer->bits();
        SkASSERT((clipBit <= 16) && "Ganesh only handles 16b or smaller stencil buffers");
        clipBit = (1 << (clipBit-1));

        fGpu->clearStencilClip(stencilSpaceIBounds, kAllIn_InitialState == initialState);

        // walk through each clip element and perform its set op
        // with the existing clip.
        for (ElementList::Iter iter(elements.headIter()); NULL != iter.get(); iter.next()) {
            const Element* element = iter.get();
            bool fillInverted = false;
            // enabled at bottom of loop
            drawState->disableState(GrGpu::kModifyStencilClip_StateBit);
            // if the target is MSAA then we want MSAA enabled when the clip is soft
            if (rt->isMultisampled()) {
                drawState->setState(GrDrawState::kHWAntialias_StateBit, element->isAA());
            }

            // This will be used to determine whether the clip shape can be rendered into the
            // stencil with arbitrary stencil settings.
            GrPathRenderer::StencilSupport stencilSupport;

            SkStrokeRec stroke(SkStrokeRec::kFill_InitStyle);

            SkRegion::Op op = element->getOp();

            GrPathRenderer* pr = NULL;
            SkTCopyOnFirstWrite<SkPath> clipPath;
            if (Element::kRect_Type == element->getType()) {
                stencilSupport = GrPathRenderer::kNoRestriction_StencilSupport;
                fillInverted = false;
            } else {
                GrAssert(Element::kPath_Type == element->getType());
                clipPath.init(element->getPath());
                fillInverted = clipPath->isInverseFillType();
                if (fillInverted) {
                    clipPath.writable()->toggleInverseFillType();
                }
                pr = this->getContext()->getPathRenderer(*clipPath,
                                                         stroke,
                                                         fGpu,
                                                         false,
                                                         GrPathRendererChain::kStencilOnly_DrawType,
                                                         &stencilSupport);
                if (NULL == pr) {
                    return false;
                }
            }

            int passes;
            GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];

//.........这里部分代码省略.........

////////////////////////////////////////////////////////////////////////////////
// Create a 1-bit clip mask in the stencil buffer. 'devClipBounds' are in device
// (as opposed to canvas) coordinates
bool GrClipMaskManager::createStencilClipMask(const GrClipData& clipDataIn,
                                              const GrIRect& devClipBounds) {

    GrAssert(kNone_ClipMaskType == fCurrClipMaskType);

    GrDrawState* drawState = fGpu->drawState();
    GrAssert(drawState->isClipState());

    GrRenderTarget* rt = drawState->getRenderTarget();
    GrAssert(NULL != rt);

    // TODO: dynamically attach a SB when needed.
    GrStencilBuffer* stencilBuffer = rt->getStencilBuffer();
    if (NULL == stencilBuffer) {
        return false;
    }

    if (stencilBuffer->mustRenderClip(clipDataIn, rt->width(), rt->height())) {

        stencilBuffer->setLastClip(clipDataIn, rt->width(), rt->height());

        // we set the current clip to the bounds so that our recursive
        // draws are scissored to them. We use the copy of the complex clip
        // we just stashed on the SB to render from. We set it back after
        // we finish drawing it into the stencil.
        const GrClipData* oldClipData = fGpu->getClip();

        // The origin of 'newClipData' is (0, 0) so it is okay to place
        // a device-coordinate bound in 'newClipStack'
        SkClipStack newClipStack(devClipBounds);
        GrClipData newClipData;
        newClipData.fClipStack = &newClipStack;

        fGpu->setClip(&newClipData);

        GrDrawTarget::AutoStateRestore asr(fGpu, GrDrawTarget::kReset_ASRInit);
        drawState = fGpu->drawState();
        drawState->setRenderTarget(rt);
        GrDrawTarget::AutoGeometryPush agp(fGpu);

        if (0 != clipDataIn.fOrigin.fX || 0 != clipDataIn.fOrigin.fY) {
            // Add the saveLayer's offset to the view matrix rather than
            // offset each individual draw
            drawState->viewMatrix()->setTranslate(
                           SkIntToScalar(-clipDataIn.fOrigin.fX),
                           SkIntToScalar(-clipDataIn.fOrigin.fY));
        }

#if !VISUALIZE_COMPLEX_CLIP
        drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
#endif

        int clipBit = stencilBuffer->bits();
        SkASSERT((clipBit <= 16) &&
                    "Ganesh only handles 16b or smaller stencil buffers");
        clipBit = (1 << (clipBit-1));

        GrIRect devRTRect = GrIRect::MakeWH(rt->width(), rt->height());

        bool clearToInside;
        SkRegion::Op firstOp = SkRegion::kReplace_Op; // suppress warning

        SkClipStack::Iter iter(*oldClipData->fClipStack,
                               SkClipStack::Iter::kBottom_IterStart);
        const SkClipStack::Iter::Clip* clip = process_initial_clip_elements(&iter,
                                                  devRTRect,
                                                  &clearToInside,
                                                  &firstOp,
                                                  clipDataIn);

        fGpu->clearStencilClip(devClipBounds, clearToInside);
        bool first = true;

        // walk through each clip element and perform its set op
        // with the existing clip.
        for ( ; NULL != clip; clip = iter.nextCombined()) {
            GrPathFill fill;
            bool fillInverted = false;
            // enabled at bottom of loop
            drawState->disableState(GrGpu::kModifyStencilClip_StateBit);
            // if the target is MSAA then we want MSAA enabled when the clip is soft
            if (rt->isMultisampled()) {
                drawState->setState(GrDrawState::kHWAntialias_StateBit, clip->fDoAA);
            }

            // Can the clip element be drawn directly to the stencil buffer
            // with a non-inverted fill rule without extra passes to
            // resolve in/out status?
            bool canRenderDirectToStencil = false;

            SkRegion::Op op = clip->fOp;
            if (first) {
                first = false;
                op = firstOp;
            }

            GrPathRenderer* pr = NULL;
//.........这里部分代码省略.........