Python Gui.row方法代码示例

# 需要导入模块: import Gui [as 别名]
# 或者: from Gui import row [as 别名]
def insert(obj):
	cal_in.insert(END,obj)

def delete(p):
	cal_in.delete(p)
	print p,len(cal_in.get())-1,cal_in.get()

from Gui import *

cal=Gui()
cal.title('Calculator')

cal_in = cal.en(width=35)

cal.row()
cal.gr(cols=6)

seven = cal.bu(text='7',command = Callable(insert,'7'))
eight = cal.bu(text='8',command = Callable(insert,'8'))
nine = cal.bu(text='9',command = Callable(insert,'9'))
div = cal.bu(text='/',command = Callable(insert,'/'))

#bspace = cal.bu(text='Del',command = Callable(delete,0))
bspace = cal.bu(text='Del',command = Callable(delete,len(cal_in.get())-1))

clr = cal.bu(text='Clr',command = Callable(delete,'7'))

four = cal.bu(text='4',command = Callable(insert,'4'))
five = cal.bu(text='5',command = Callable(insert,'5'))
six = cal.bu(text='6',command = Callable(insert,'6'))
mul = cal.bu(text='*',command = Callable(insert,'*'))

# 需要导入模块: import Gui [as 别名]
# 或者: from Gui import row [as 别名]
class Panel2(Thread):
	def __init__(self,field):
		Thread.__init__(self)
		self.field=field
		self.field.panel=self
		self.activeCharge=None
		self.sel=None
		self.g=None

	def run(self):
		self.g=Gui()
		self.g.title('Control Panel')

		#charge
		self.chgla=self.g.la(text='Charge')
		self.g.gr(cols=3)
		minus=self.g.bu(text='-', command=Callable(self.addC, -1))
		self.chg=self.g.en()
		plus=self.g.bu(text='+', command=Callable(self.addC, 1))
		self.g.endgr()

		#position
		self.pos=self.g.la(text='Position')
		self.g.gr(cols=3)
		xla=self.g.la(text='x')
		yla=self.g.la(text='y')
		zla=self.g.la(text='z')
		self.x=self.g.en(text='')
		self.y=self.g.en(text='')
		self.z=self.g.en(text='')
		self.g.endgr()
		#menu
		self.men=self.g.mb(text='Change/ Add Charge')
		hi=self.g.mi(self.men, text='Add point charge', command=Callable(self.addPoint))
		self.g.mi(self.men, text='Add line charge', command=Callable(self.addLine))
		self.g.mi(self.men, text='Find voltage at point', command=self.findVolt)

		
		#add
		self.g.row([1,1])
		self.add=self.g.bu(text='Add')
		self.rem=self.g.bu(text='Delete', command=self.remove)
		self.g.endrow()
		#self.g.bu(text='Quit', command=self.end)
		
		self.disp=self.g.mb(text='Voltage Field')
		self.g.mi(self.disp, text='Voltage Field', command=self.showv)
		self.g.mi(self.disp, text='Electric Field', command=self.showe)
		#ans
		self.ans=self.g.la(text='')

		
		self.field.start()
		for chrg in self.field.charges:
			chrg.makeMi()
		self.g.mainloop()
		
	def showv(self):
		self.disp.config(text='Voltage Field')
		self.actf=self.field.vfield
		self.acte=self.field.vdots
		self.field.change=True
		for p in self.field.earrows:
			self.field.earrows[p].visible=False
		for p in self.field.vdots:
			self.field.vdots[p].visible=True
	def showe(self):
		self.disp.config(text='Electric Field')
		self.field.actf=self.field.efield
		self.field.acte=self.field.earrows
		self.field.change=True
		for p in self.field.earrows:
			self.field.earrows[p].visible=True
		for p in self.field.vdots:
			self.field.vdots[p].visible=False
		
	def addPoint(self):
		self.men.config(text='Add Point')
		self.pos.config(text='Position')
		self.add.config(command=Callable(self.addPCharge))
		
	def addLine(self):
		self.men.config(text='Add Line')
		self.pos.config(text='Equation in terms of t')
		self.add.config(command=Callable(self.addLCharge))
		self.field.change=True
		
	def addPCharge(self):
		pos=(int(self.x.get()), int(self.y.get()), int(self.z.get()))
		c=float(self.chg.get())
		p=Point(pos=pos, charge=c)
		self.addCharge(p)

	def addLCharge(self):
		eqn=(self.x.get(), self.y.get(), self.z.get())
		dens=self.chg.get()
		p=Line(eqn=eqn, density=dens)
		self.addCharge(p)


#.........这里部分代码省略.........

# 需要导入模块: import Gui [as 别名]
# 或者: from Gui import row [as 别名]
def advCalc(): #Advanced Calculator
    global window
    global display
    global prevans
    global mrc
    prevans = ''
    window.destroy()
    window = Gui()
    window.option_add( "*font", "Arial 9" ) 
    window.minsize(300,400)
    window.maxsize(300,400)
    window.iconbitmap('icon.ico')
    window.title("WinCalc (Advanced Mode)")
    window.bind('<Return>', solveAdv)
    window.bind('<Control-a>', selectallButton)
    window.bind('<Control-A>', selectallButton)
    window.bind('<Control-v>', pasteButton)
    window.bind('<Control-V>', pasteButton)
    window.bind('<Control-e>', copyButton)
    window.bind('<Control-E>', copyButton)
    menubar = Menu(window)
    filemenu = Menu(menubar, tearoff=0)
    filemenu.add_command(label="Basic Mode", command=basicCalc)
    filemenu.add_command(label="Reset Calculator", command=advCalc)
    filemenu.add_separator()
    filemenu.add_command(label="Radian Mode", command=radMode)
    filemenu.add_command(label="Degree Mode", command=degMode)
    filemenu.add_separator()
    filemenu.add_command(label="Exit", command=exitProgram)
    menubar.add_cascade(label="File", menu=filemenu)
    editmenu = Menu(menubar, tearoff=0)
    editmenu.add_command(label="Undo", command=undoButton)
    editmenu.add_separator()
    editmenu.add_command(label="Cut Equation", command=cutButton)
    editmenu.add_command(label="Copy Equation (Ctrl-E)", command=copyButton)
    editmenu.add_command(label="Paste Equation (Ctrl-V)", command=pasteButton)
    editmenu.add_separator()
    editmenu.add_command(label="Select All (Ctrl-A)", command=selectallButton)
    editmenu.add_command(label="Clear Equation", command=clearButton)
    menubar.add_cascade(label="Edit", menu=editmenu)
    goodies = Menu(menubar, tearoff=0)
    goodies.add_command(label="Equation Grapher", command=grapherCalc)
    goodies.add_command(label="Table of Values Generator", command=tableMode)
    goodies.add_separator()
    goodies.add_command(label="Show Paper Tape", command=paperTape)
    menubar.add_cascade(label="Goodies", menu=goodies)
    helpmenu = Menu(menubar, tearoff=0)
    helpmenu.add_command(label="Instructions - Basic Mode", command=basicDialog)
    helpmenu.add_command(label="Instructions - Advanced Mode", command=advDialog)
    helpmenu.add_separator()
    helpmenu.add_command(label="About", command=aboutDialog)
    menubar.add_cascade(label="Help", menu=helpmenu)
    window.config(menu=menubar)
    window.row()
    display = window.te(width=10, height=2, padx=2, pady=2, ipadx=2, ipady=2, borderwidth = 1, relief = SUNKEN, font=("Courier New", 16))
    window.endrow()
    window.row(pady=5,padx=5)
    window.gr(cols=5)
    ###BEGIN BUTTONS###
    mrc = window.bu(text='MRC',width=5,command=memRc)
    window.bu(text='M+',width=5,command=amemPlus)
    window.bu(text='M-',width=5,command=amemMinus)
    window.bu(text='DEL',width=5,command=delButton)
    window.bu(text='AC',width=5,command=clearDisplay)
    ######BEGIN ADVANCED FUNCTIONS#######
    window.la(dmode)
    window.bu(text='1/x',width=5,command=Callable(buttonPress,'1/('))
    window.bu(text='x^x',width=5,command=Callable(buttonPress,'**'))
    window.bu(text='x^2',width=5,command=Callable(buttonPress,'**2'))
    window.bu(text='π',width=5,command=Callable(buttonPress,'(3.14159265359)'))
    ##
    window.bu(text='sin^-1',width=5,command=Callable(buttonPress,'sin^-1('))
    window.bu(text='cos^-1',width=5,command=Callable(buttonPress,'cos^-1('))
    window.bu(text='tan^-1',width=5,command=Callable(buttonPress,'tan^-1('))
    window.bu(text='sinh',width=5,command=Callable(buttonPress,'sinh('))
    window.bu(text='sinh^-1',width=5,command=Callable(buttonPress,'sinh^-1('))
    ##
    window.bu(text='sin',width=5,command=Callable(buttonPress,'sin('))
    window.bu(text='cos',width=5,command=Callable(buttonPress,'cos('))
    window.bu(text='tan',width=5,command=Callable(buttonPress,'tan('))
    window.bu(text='cosh',width=5,command=Callable(buttonPress,'cosh('))
    window.bu(text='cosh^-1',width=5,command=Callable(buttonPress,'cosh^-1('))
    ##
    window.bu(text='DEG(x)',width=5,command=Callable(buttonPress,'degrees('))
    window.bu(text='RAD(x)',width=5,command=Callable(buttonPress,'radians('))
    window.bu(text='Ran#',width=5,command=Callable(buttonPress,'Ran#'))
    window.bu(text='tanh',width=5,command=Callable(buttonPress,'tanh('))
    window.bu(text='tanh^-1',width=5,command=Callable(buttonPress,'tanh^-1('))
    ##
    window.bu(text='DICE',width=5,command=diceRoll)
    window.bu(text='D->BIN',width=5,command=binConvert)
    window.bu(text='D->OCT',width=5,command=octConvert)
    window.bu(text='D->HEX',width=5,command=hexConvert)
    window.bu(text='x(2)√x(1)',width=5,command=Callable(buttonPress,'**(1.0/'))
    ##
    window.bu(text='(',width=5,command=Callable(buttonPress,'('))
    window.bu(text=')',width=5,command=Callable(buttonPress,')'))
    window.bu(text='x!',width=5,command=Callable(buttonPress,'!('))
    window.bu(text='ln(x)',width=5,command=Callable(buttonPress,'ln('))
    window.bu(text='e^x',width=5,command=Callable(buttonPress,'(2.71828182846)**'))
#.........这里部分代码省略.........

# 需要导入模块: import Gui [as 别名]
# 或者: from Gui import row [as 别名]
        money = int(money)
        money += bet_placed
        money = str(money)
        howto.config (text = 'WINNER!!!!!! Press "Play Again!" to play again, or "Back To Lobby"')
        betlabel.config (text = 'Your Wager: $ ___')
        moneylabel.config (text = 'Your Money: $ ' + money)
    else:       # Other wise, call the compare function and compare your total to your dealers
        compare (total, dtotal)
    
def destroy ():      # Close the main window
    g.destroy()


g = Gui()   # Make a main "g" window
g.title ("Black Jack")   # Title the window
g.row([1,1,1,25])
mb_file = g.mb (text = "File", borderwidth = 0, bg = 'black', fg = 'red')       # Create a File drop menu
g.mi (mb_file, text = "Return to Arcade", command = kill)

mb_help = g.mb (text = "Help", borderwidth = 0, bg = 'black', fg = 'yellow')    # Create a Help drop menu
g.mi (mb_help, text = "Instructions", command = instructions)   #call the instruction function

g.la ("", bg = 'black')
g.endrow()

canvas = g.ca (width = 600, height = 550, bg = "darkgreen")       # Create a canvas and draw the background of the main game


g.row ([1, 1])
hit = g.bu (text = "Hit Me!", border = 5, command = hit, state = DISABLED)      # Put a Hit Me button
stay = g.bu (text = "Stay!", border = 5, command = stay, state = DISABLED)      # Put a Stay button

# 需要导入模块: import Gui [as 别名]
# 或者: from Gui import row [as 别名]
def basicCalc(): #Basic Calculator
    global window
    global display
    global prevans
    global mrc
    prevans = ''
    window.destroy()
    window = Gui()
    window.option_add( "*font", "Arial 9" ) 
    window.minsize(300,240)
    window.maxsize(300,240)
    window.iconbitmap('icon.ico')
    window.title("WinCalc (Basic Mode)")
    window.bind('<Return>', solveEqn)
    window.bind('<Control-a>', selectallButton)
    window.bind('<Control-A>', selectallButton)
    window.bind('<Control-v>', pasteButton)
    window.bind('<Control-V>', pasteButton)
    window.bind('<Control-e>', copyButton)
    window.bind('<Control-E>', copyButton)
    menubar = Menu(window)
    filemenu = Menu(menubar, tearoff=0)
    filemenu.add_command(label="Advanced Mode", command=advCalc)
    filemenu.add_command(label="Reset Calculator", command=basicCalc)
    filemenu.add_separator()
    filemenu.add_command(label="Exit", command=exitProgram)
    menubar.add_cascade(label="File", menu=filemenu)
    editmenu = Menu(menubar, tearoff=0)
    editmenu.add_command(label="Undo", command=undoButton)
    editmenu.add_separator()
    editmenu.add_command(label="Cut Equation", command=cutButton)
    editmenu.add_command(label="Copy Equation (Ctrl-E)", command=copyButton)
    editmenu.add_command(label="Paste Equation (Ctrl-V)", command=pasteButton)
    editmenu.add_separator()
    editmenu.add_command(label="Select All (Ctrl-A)", command=selectallButton)
    editmenu.add_command(label="Clear Equation", command=clearButton)
    menubar.add_cascade(label="Edit", menu=editmenu)
    goodies = Menu(menubar, tearoff=0)
    goodies.add_command(label="Equation Grapher", command=grapherCalc)
    goodies.add_command(label="Table of Values Generator", command=tableMode)
    goodies.add_separator()
    goodies.add_command(label="Show Paper Tape", command=paperTape)
    menubar.add_cascade(label="Goodies", menu=goodies)
    helpmenu = Menu(menubar, tearoff=0)
    helpmenu.add_command(label="Instructions - Basic Mode", command=basicDialog)
    helpmenu.add_command(label="Instructions - Advanced Mode", command=advDialog)
    helpmenu.add_separator()
    helpmenu.add_command(label="About", command=aboutDialog)
    menubar.add_cascade(label="Help", menu=helpmenu)
    window.config(menu=menubar)
    window.row()
    display = window.te(width=10, height=2, padx=2, pady=2, ipadx=2, ipady=2, borderwidth = 1, relief = SUNKEN, font=("Courier New", 16))
    window.endrow()
    window.row(pady=5,padx=5)
    window.gr(cols=5)
    mrc = window.bu(text='MRC',width=5,command=memRc)
    window.bu(text='M+',width=5,command=memPlus)
    window.bu(text='M-',width=5,command=memMinus)
    window.bu(text='DEL',width=5,command=delButton)
    window.bu(text='AC',width=5,command=clearDisplay)
    window.bu(text='7',width=5,command=Callable(buttonPress,7))
    window.bu(text='8',width=5,command=Callable(buttonPress,8))
    window.bu(text='9',width=5,command=Callable(buttonPress,9))
    window.bu(text='%',width=5,command=percentButton)
    window.bu(text='+/-',width=5,command=plusMinus)
    window.bu(text='4',width=5,command=Callable(buttonPress,4))
    window.bu(text='5',width=5,command=Callable(buttonPress,5))
    window.bu(text='6',width=5,command=Callable(buttonPress,6))
    window.bu(text='×',width=5,command=Callable(buttonPress,'*'))
    window.bu(text='÷',width=5,command=Callable(buttonPress,'/'))
    window.bu(text='1',width=5,command=Callable(buttonPress,1))
    window.bu(text='2',width=5,command=Callable(buttonPress,2))
    window.bu(text='3',width=5,command=Callable(buttonPress,3))
    window.bu(text='+',width=5,command=Callable(buttonPress,'+'))
    window.bu(text='−',width=5,command=Callable(buttonPress,'-'))
    window.bu(text='0',width=5,command=Callable(buttonPress,0))
    window.bu(text='.',width=5,command=Callable(buttonPress,'.'))
    window.bu(text='Ans',width=5,command=prevAns)
    window.bu(text='√',width=5,command=squareRoot)
    window.bu(text='=',width=5,command=solveEqn)
    window.endgr()
    window.endrow()
    display.focus_set()
    window.mainloop()
    try:
        papertape.destroy()
    except:
        error = True #print "DEBUG - NO PAPER TAPE ENABLED"
    try:
        grapher.destroy()
    except:
        error = True #print "DEBUG - NO GRAPHER ENABLED"