C++ ModelConfig::Print方法代码示例

void StandardTestStatDistributionDemo(const char* infile = "",
                                      const char* workspaceName = "combined",
                                      const char* modelConfigName = "ModelConfig",
                                      const char* dataName = "obsData"){


  // the number of toy MC used to generate the distribution
  int nToyMC = 1000;
  // The parameter below is needed for asymptotic distribution to be chi-square,
  // but set to false if your model is not numerically stable if mu<0
  bool allowNegativeMu=true;


  /////////////////////////////////////////////////////////////
  // First part is just to access a user-defined file
  // or create the standard example file if it doesn't exist
  ////////////////////////////////////////////////////////////
   const char* filename = "";
   if (!strcmp(infile,"")) {
      filename = "results/example_combined_GaussExample_model.root";
      bool fileExist = !gSystem->AccessPathName(filename); // note opposite return code
      // if file does not exists generate with histfactory
      if (!fileExist) {
#ifdef _WIN32
         cout << "HistFactory file cannot be generated on Windows - exit" << endl;
         return;
#endif
         // Normally this would be run on the command line
         cout <<"will run standard hist2workspace example"<<endl;
         gROOT->ProcessLine(".! prepareHistFactory .");
         gROOT->ProcessLine(".! hist2workspace config/example.xml");
         cout <<"\n\n---------------------"<<endl;
         cout <<"Done creating example input"<<endl;
         cout <<"---------------------\n\n"<<endl;
      }

   }
   else
      filename = infile;

   // Try to open the file
   TFile *file = TFile::Open(filename);

   // if input file was specified byt not found, quit
   if(!file ){
      cout <<"StandardRooStatsDemoMacro: Input file " << filename << " is not found" << endl;
      return;
   }


  /////////////////////////////////////////////////////////////
  // Now get the data and workspace
  ////////////////////////////////////////////////////////////

  // get the workspace out of the file
  RooWorkspace* w = (RooWorkspace*) file->Get(workspaceName);
  if(!w){
    cout <<"workspace not found" << endl;
    return;
  }

  // get the modelConfig out of the file
  ModelConfig* mc = (ModelConfig*) w->obj(modelConfigName);

  // get the modelConfig out of the file
  RooAbsData* data = w->data(dataName);

  // make sure ingredients are found
  if(!data || !mc){
    w->Print();
    cout << "data or ModelConfig was not found" <<endl;
    return;
  }

  mc->Print();
  /////////////////////////////////////////////////////////////
  // Now find the upper limit based on the asymptotic results
  ////////////////////////////////////////////////////////////
  RooRealVar* firstPOI = (RooRealVar*) mc->GetParametersOfInterest()->first();
  ProfileLikelihoodCalculator plc(*data,*mc);
  LikelihoodInterval* interval = plc.GetInterval();
  double plcUpperLimit = interval->UpperLimit(*firstPOI);
  delete interval;
  cout << "\n\n--------------------------------------"<<endl;
  cout <<"Will generate sampling distribution at " << firstPOI->GetName() << " = " << plcUpperLimit <<endl;
  int nPOI = mc->GetParametersOfInterest()->getSize();
  if(nPOI>1){
    cout <<"not sure what to do with other parameters of interest, but here are their values"<<endl;
    mc->GetParametersOfInterest()->Print("v");
  }

  /////////////////////////////////////////////
  // create thte test stat sampler
  ProfileLikelihoodTestStat ts(*mc->GetPdf());

  // to avoid effects from boundary and simplify asymptotic comparison, set min=-max
  if(allowNegativeMu)
    firstPOI->setMin(-1*firstPOI->getMax());

  // temporary RooArgSet
//.........这里部分代码省略.........

void OneSidedFrequentistUpperLimitWithBands_intermediate(const char* infile = "",
					    const char* workspaceName = "combined",
					    const char* modelConfigName = "ModelConfig",
					    const char* dataName = "obsData"){


  double confidenceLevel=0.95;
  // degrade/improve number of pseudo-experiments used to define the confidence belt.  
  // value of 1 corresponds to default number of toys in the tail, which is 50/(1-confidenceLevel)
  double additionalToysFac = 1.;  
  int nPointsToScan = 30; // number of steps in the parameter of interest 
  int nToyMC = 100; // number of toys used to define the expected limit and band

  TStopwatch t;
  t.Start();
  /////////////////////////////////////////////////////////////
  // First part is just to access a user-defined file 
  // or create the standard example file if it doesn't exist
  ////////////////////////////////////////////////////////////
  const char* filename = "";
  if (!strcmp(infile,""))
    filename = "results/example_combined_GaussExample_model.root";
  else
    filename = infile;
  // Check if example input file exists
  TFile *file = TFile::Open(filename);

  // if input file was specified byt not found, quit
  if(!file && strcmp(infile,"")){
    cout <<"file not found" << endl;
    return;
  } 

  // if default file not found, try to create it
  if(!file ){
    // Normally this would be run on the command line
    cout <<"will run standard hist2workspace example"<<endl;
    gROOT->ProcessLine(".! prepareHistFactory .");
    gROOT->ProcessLine(".! hist2workspace config/example.xml");
    cout <<"\n\n---------------------"<<endl;
    cout <<"Done creating example input"<<endl;
    cout <<"---------------------\n\n"<<endl;
  }

  // now try to access the file again
  file = TFile::Open(filename);
  if(!file){
    // if it is still not there, then we can't continue
    cout << "Not able to run hist2workspace to create example input" <<endl;
    return;
  }

  
  /////////////////////////////////////////////////////////////
  // Now get the data and workspace
  ////////////////////////////////////////////////////////////

  // get the workspace out of the file
  RooWorkspace* w = (RooWorkspace*) file->Get(workspaceName);
  if(!w){
    cout <<"workspace not found" << endl;
    return;
  }

  // get the modelConfig out of the file
  ModelConfig* mc = (ModelConfig*) w->obj(modelConfigName);

  // get the modelConfig out of the file
  RooAbsData* data = w->data(dataName);

  // make sure ingredients are found
  if(!data || !mc){
    w->Print();
    cout << "data or ModelConfig was not found" <<endl;
    return;
  }

  cout << "Found data and ModelConfig:" <<endl;
  mc->Print();

  /////////////////////////////////////////////////////////////
  // Now get the POI for convenience
  // you may want to adjust the range of your POI
  ////////////////////////////////////////////////////////////
  RooRealVar* firstPOI = (RooRealVar*) mc->GetParametersOfInterest()->first();
  //  firstPOI->setMin(0);
  //  firstPOI->setMax(10);

  /////////////////////////////////////////////
  // create and use the FeldmanCousins tool
  // to find and plot the 95% confidence interval
  // on the parameter of interest as specified
  // in the model config
  // REMEMBER, we will change the test statistic
  // so this is NOT a Feldman-Cousins interval
  FeldmanCousins fc(*data,*mc);
  fc.SetConfidenceLevel(confidenceLevel); 
  fc.AdditionalNToysFactor(additionalToysFac); // improve sampling that defines confidence belt
  //  fc.UseAdaptiveSampling(true); // speed it up a bit, but don't use for expectd limits
  fc.SetNBins(nPointsToScan); // set how many points per parameter of interest to scan
//.........这里部分代码省略.........

float ComputeTestStat(TString wsfile, double mu_susy_sig_val) {

  gROOT->Reset();

  TFile* wstf = new TFile( wsfile ) ;

  RooWorkspace* ws = dynamic_cast<RooWorkspace*>( wstf->Get("ws") );
  ws->Print() ;
  
  ModelConfig* modelConfig = (ModelConfig*) ws->obj( "SbModel" ) ;
  
  modelConfig->Print() ;

  RooDataSet* rds = (RooDataSet*) ws->obj( "ra2b_observed_rds" ) ;
  
  rds->Print() ;
  rds->printMultiline(cout, 1, kTRUE, "") ;
  
  RooAbsPdf* likelihood = modelConfig->GetPdf() ;
  
  RooRealVar* rrv_mu_susy_sig = ws->var("mu_susy_all0lep") ;
  if ( rrv_mu_susy_sig == 0x0 ) {
    printf("\n\n\n *** can't find mu_susy_all0lep in workspace.  Quitting.\n\n\n") ;
    return ;
  } else {
    printf(" current value is : %8.3f\n", rrv_mu_susy_sig->getVal() ) ; cout << flush ;
    rrv_mu_susy_sig->setConstant(kFALSE) ;
  }

  /*
  // check the impact of varying the qcd normalization:

  RooRealVar *rrv_qcd_0lepLDP_ratioH1 = ws->var("qcd_0lepLDP_ratio_H1");
  RooRealVar *rrv_qcd_0lepLDP_ratioH2 = ws->var("qcd_0lepLDP_ratio_H2");
  RooRealVar *rrv_qcd_0lepLDP_ratioH3 = ws->var("qcd_0lepLDP_ratio_H3");
  
  rrv_qcd_0lepLDP_ratioH1->setVal(0.3);
  rrv_qcd_0lepLDP_ratioH2->setVal(0.3);
  rrv_qcd_0lepLDP_ratioH3->setVal(0.3);
  
  rrv_qcd_0lepLDP_ratioH1->setConstant(kTRUE);
  rrv_qcd_0lepLDP_ratioH2->setConstant(kTRUE);
  rrv_qcd_0lepLDP_ratioH3->setConstant(kTRUE);
  */
  
  printf("\n\n\n  ===== Doing a fit with SUSY component floating ====================\n\n") ;

  RooFitResult* fitResult = likelihood->fitTo( *rds, Save(true), PrintLevel(0) ) ;
  double logLikelihoodSusyFloat = fitResult->minNll() ;
  
  double logLikelihoodSusyFixed(0.) ;
  double testStatVal(-1.) ;
  if ( mu_susy_sig_val >= 0. ) {
    printf("\n\n\n  ===== Doing a fit with SUSY fixed ====================\n\n") ;
    printf(" fixing mu_susy_sig to %8.2f.\n", mu_susy_sig_val ) ;
    rrv_mu_susy_sig->setVal( mu_susy_sig_val ) ;
    rrv_mu_susy_sig->setConstant(kTRUE) ;
    
    fitResult = likelihood->fitTo( *rds, Save(true), PrintLevel(0) ) ;
    logLikelihoodSusyFixed = fitResult->minNll() ;
    testStatVal = 2.*(logLikelihoodSusyFixed - logLikelihoodSusyFloat) ;
    printf("\n\n\n ======= test statistic : -2 * ln (L_fixed / ln L_max) = %8.3f\n\n\n", testStatVal ) ;
  }


  return testStatVal ;

}