C++ D_PAD::GetParent方法代码示例

void D_PAD::ImportSettingsFromMaster( const D_PAD& aMasterPad )
{
    SetShape( aMasterPad.GetShape() );
    SetLayerSet( aMasterPad.GetLayerSet() );
    SetAttribute( aMasterPad.GetAttribute() );

    // The pad orientation, for historical reasons is the
    // pad rotation + parent rotation.
    // So we have to manage this parent rotation
    double pad_rot = aMasterPad.GetOrientation();

    if( aMasterPad.GetParent() )
        pad_rot -= aMasterPad.GetParent()->GetOrientation();

    if( GetParent() )
        pad_rot += GetParent()->GetOrientation();

    SetOrientation( pad_rot );

    SetSize( aMasterPad.GetSize() );
    SetDelta( wxSize( 0, 0 ) );
    SetOffset( aMasterPad.GetOffset() );
    SetDrillSize( aMasterPad.GetDrillSize() );
    SetDrillShape( aMasterPad.GetDrillShape() );
    SetRoundRectRadiusRatio( aMasterPad.GetRoundRectRadiusRatio() );

    switch( aMasterPad.GetShape() )
    {
    case PAD_SHAPE_TRAPEZOID:
        SetDelta( aMasterPad.GetDelta() );
        break;

    case PAD_SHAPE_CIRCLE:
        // ensure size.y == size.x
        SetSize( wxSize( GetSize().x, GetSize().x ) );
        break;

    default:
        ;
    }

    switch( aMasterPad.GetAttribute() )
    {
    case PAD_ATTRIB_SMD:
    case PAD_ATTRIB_CONN:
        // These pads do not have hole (they are expected to be only on one
        // external copper layer)
        SetDrillSize( wxSize( 0, 0 ) );
        break;

    default:
        ;
    }

    // Add or remove custom pad shapes:
    SetPrimitives( aMasterPad.GetPrimitives() );
    SetAnchorPadShape( aMasterPad.GetAnchorPadShape() );
    MergePrimitivesAsPolygon();
}

bool DIALOG_TRACK_VIA_PROPERTIES::confirmPadChange( const std::vector<D_PAD*>& changingPads )
{
    wxString msg;

    if( changingPads.size() == 1 )
    {
        D_PAD* pad = *changingPads.begin();
        msg.Printf( _( "This will change the net assigned to %s pad %s to %s.\n"
                       "Do you wish to continue?" ),
                    pad->GetParent()->GetReference(),
                    pad->GetName(),
                    m_netSelector->GetValue() );
    }
    else if( changingPads.size() == 2 )
    {
        D_PAD* pad1 = *changingPads.begin();
        D_PAD* pad2 = *( ++changingPads.begin() );
        msg.Printf( _( "This will change the net assigned to %s pad %s and %s pad %s to %s.\n"
                       "Do you wish to continue?" ),
                    pad1->GetParent()->GetReference(),
                    pad1->GetName(),
                    pad2->GetParent()->GetReference(),
                    pad2->GetName(),
                    m_netSelector->GetValue() );
    }
    else
    {
        msg.Printf( _( "This will change the net assigned to %d connected pads to %s.\n"
                       "Do you wish to continue?" ),
                    changingPads.size(),
                    m_netSelector->GetValue() );
    }

    KIDIALOG dlg( this, msg, _( "Confirmation" ), wxOK | wxCANCEL | wxICON_WARNING );
    dlg.SetOKLabel( _( "Continue" ) );
    dlg.DoNotShowCheckbox( __FILE__, __LINE__ );

    return dlg.ShowModal() == wxID_OK;
}

//.........这里部分代码省略.........
        if( pad->GetPosition().x > x_limit )
            break;

        // No problem if pads which are on copper layers are on different copper layers,
        // (pads can be only on a technical layer, to build complex pads)
        // but their hole (if any ) can create DRC error because they are on all
        // copper layers, so we test them
        if( ( pad->GetLayerSet() & layerMask ) == 0 &&
            ( pad->GetLayerSet() & all_cu ) != 0 &&
            ( aRefPad->GetLayerSet() & all_cu ) != 0 )
        {
            // if holes are in the same location and have the same size and shape,
            // this can be accepted
            if( pad->GetPosition() == aRefPad->GetPosition()
                && pad->GetDrillSize() == aRefPad->GetDrillSize()
                && pad->GetDrillShape() == aRefPad->GetDrillShape() )
            {
                if( aRefPad->GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
                    continue;

                // for oval holes: must also have the same orientation
                if( pad->GetOrientation() == aRefPad->GetOrientation() )
                    continue;
            }

            /* Here, we must test clearance between holes and pads
             * dummy pad size and shape is adjusted to pad drill size and shape
             */
            if( pad->GetDrillSize().x )
            {
                // pad under testing has a hole, test this hole against pad reference
                dummypad.SetPosition( pad->GetPosition() );
                dummypad.SetSize( pad->GetDrillSize() );
                dummypad.SetShape( pad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ?
                                                           PAD_SHAPE_OVAL : PAD_SHAPE_CIRCLE );
                dummypad.SetOrientation( pad->GetOrientation() );

                if( !checkClearancePadToPad( aRefPad, &dummypad ) )
                {
                    // here we have a drc error on pad!
                    m_currentMarker = fillMarker( pad, aRefPad,
                                                  DRCE_HOLE_NEAR_PAD, m_currentMarker );
                    return false;
                }
            }

            if( aRefPad->GetDrillSize().x ) // pad reference has a hole
            {
                dummypad.SetPosition( aRefPad->GetPosition() );
                dummypad.SetSize( aRefPad->GetDrillSize() );
                dummypad.SetShape( aRefPad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ?
                                                               PAD_SHAPE_OVAL : PAD_SHAPE_CIRCLE );
                dummypad.SetOrientation( aRefPad->GetOrientation() );

                if( !checkClearancePadToPad( pad, &dummypad ) )
                {
                    // here we have a drc error on aRefPad!
                    m_currentMarker = fillMarker( aRefPad, pad,
                                                  DRCE_HOLE_NEAR_PAD, m_currentMarker );
                    return false;
                }
            }

            continue;
        }

        // The pad must be in a net (i.e pt_pad->GetNet() != 0 ),
        // But no problem if pads have the same netcode (same net)
        if( pad->GetNetCode() && ( aRefPad->GetNetCode() == pad->GetNetCode() ) )
            continue;

        // if pads are from the same footprint
        if( pad->GetParent() == aRefPad->GetParent() )
        {
            // and have the same pad number ( equivalent pads  )

            // one can argue that this 2nd test is not necessary, that any
            // two pads from a single module are acceptable.  This 2nd test
            // should eventually be a configuration option.
            if( pad->PadNameEqual( aRefPad ) )
                continue;
        }

        // if either pad has no drill and is only on technical layers, not a clearance violation
        if( ( ( pad->GetLayerSet() & layerMask ) == 0 && !pad->GetDrillSize().x ) ||
            ( ( aRefPad->GetLayerSet() & layerMask ) == 0 && !aRefPad->GetDrillSize().x ) )
        {
            continue;
        }

        if( !checkClearancePadToPad( aRefPad, pad ) )
        {
            // here we have a drc error!
            m_currentMarker = fillMarker( aRefPad, pad, DRCE_PAD_NEAR_PAD1, m_currentMarker );
            return false;
        }
    }

    return true;
}

void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
{
    if( !padValuesOK() )
        return;

    bool rastnestIsChanged = false;
    int  isign = m_isFlipped ? -1 : 1;

    transferDataToPad( m_padMaster );
    // m_padMaster is a pattern: ensure there is no net for this pad:
    m_padMaster->SetNetCode( NETINFO_LIST::UNCONNECTED );

    if( m_currentPad )   // Set current Pad parameters
    {
        wxSize  size;
        MODULE* module = m_currentPad->GetParent();

        m_parent->SaveCopyInUndoList( module, UR_CHANGED );
        module->SetLastEditTime();

        // redraw the area where the pad was, without pad (delete pad on screen)
        m_currentPad->SetFlags( DO_NOT_DRAW );
        m_parent->GetCanvas()->RefreshDrawingRect( m_currentPad->GetBoundingBox() );
        m_currentPad->ClearFlags( DO_NOT_DRAW );

        // Update values
        m_currentPad->SetShape( m_padMaster->GetShape() );
        m_currentPad->SetAttribute( m_padMaster->GetAttribute() );

        if( m_currentPad->GetPosition() != m_padMaster->GetPosition() )
        {
            m_currentPad->SetPosition( m_padMaster->GetPosition() );
            rastnestIsChanged = true;
        }

        // compute the pos 0 value, i.e. pad position for module with orientation = 0
        // i.e. relative to module origin (module position)
        wxPoint pt = m_currentPad->GetPosition() - module->GetPosition();

        RotatePoint( &pt, -module->GetOrientation() );

        m_currentPad->SetPos0( pt );

        m_currentPad->SetOrientation( m_padMaster->GetOrientation() * isign + module->GetOrientation() );

        m_currentPad->SetSize( m_padMaster->GetSize() );

        size = m_padMaster->GetDelta();
        size.y *= isign;
        m_currentPad->SetDelta( size );

        m_currentPad->SetDrillSize( m_padMaster->GetDrillSize() );
        m_currentPad->SetDrillShape( m_padMaster->GetDrillShape() );

        wxPoint offset = m_padMaster->GetOffset();
        offset.y *= isign;
        m_currentPad->SetOffset( offset );

        m_currentPad->SetPadToDieLength( m_padMaster->GetPadToDieLength() );

        if( m_currentPad->GetLayerSet() != m_padMaster->GetLayerSet() )
        {
            rastnestIsChanged = true;
            m_currentPad->SetLayerSet( m_padMaster->GetLayerSet() );
        }

        if( m_isFlipped )
            m_currentPad->SetLayerSet( FlipLayerMask( m_currentPad->GetLayerSet() ) );

        m_currentPad->SetPadName( m_padMaster->GetPadName() );

        wxString padNetname;

        // For PAD_HOLE_NOT_PLATED, ensure there is no net name selected
        if( m_padMaster->GetAttribute() != PAD_HOLE_NOT_PLATED  )
            padNetname = m_PadNetNameCtrl->GetValue();

        if( m_currentPad->GetNetname() != padNetname )
        {
            const NETINFO_ITEM* netinfo = m_board->FindNet( padNetname );

            if( !padNetname.IsEmpty() &&  netinfo == NULL )
            {
                DisplayError( NULL, _( "Unknown netname, netname not changed" ) );
            }
            else
            {
                rastnestIsChanged = true;
                m_currentPad->SetNetCode( netinfo->GetNet() );
            }
        }

        m_currentPad->SetLocalClearance( m_padMaster->GetLocalClearance() );
        m_currentPad->SetLocalSolderMaskMargin( m_padMaster->GetLocalSolderMaskMargin() );
        m_currentPad->SetLocalSolderPasteMargin( m_padMaster->GetLocalSolderPasteMargin() );
        m_currentPad->SetLocalSolderPasteMarginRatio( m_padMaster->GetLocalSolderPasteMarginRatio() );
        m_currentPad->SetZoneConnection( m_padMaster->GetZoneConnection() );
        m_currentPad->SetThermalWidth( m_padMaster->GetThermalWidth() );
        m_currentPad->SetThermalGap( m_padMaster->GetThermalGap() );

//.........这里部分代码省略.........

void DIALOG_PAD_PROPERTIES::initValues()
{
    wxString    msg;
    double      angle;

    // Disable pad net name wxTextCtrl if the caller is the footprint editor
    // because nets are living only in the board managed by the board editor
    m_canEditNetName = m_parent->IsType( FRAME_PCB );


    // Setup layers names from board
    // Should be made first, before calling m_rbCopperLayersSel->SetSelection()
    m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( F_Cu ) );
    m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( B_Cu ) );

    m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( F_Adhes ) );
    m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( B_Adhes ) );
    m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( F_Paste ) );
    m_PadLayerPateCu->SetLabel( m_board->GetLayerName( B_Paste ) );
    m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( F_SilkS ) );
    m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( B_SilkS ) );
    m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( F_Mask ) );
    m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( B_Mask ) );
    m_PadLayerECO1->SetLabel( m_board->GetLayerName( Eco1_User ) );
    m_PadLayerECO2->SetLabel( m_board->GetLayerName( Eco2_User ) );
    m_PadLayerDraft->SetLabel( m_board->GetLayerName( Dwgs_User ) );

    m_isFlipped = false;

    if( m_currentPad )
    {
        MODULE* module = m_currentPad->GetParent();

        if( module->GetLayer() == B_Cu )
        {
            m_isFlipped = true;
            m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
        }

        msg.Printf( wxT( "%.1f" ), module->GetOrientation() / 10.0 );
        m_staticModuleRotValue->SetLabel( msg );
    }

    if( m_isFlipped )
    {
        wxPoint pt = m_dummyPad->GetOffset();
        NEGATE( pt.y );
        m_dummyPad->SetOffset( pt );

        wxSize sz = m_dummyPad->GetDelta();
        NEGATE( sz.y );
        m_dummyPad->SetDelta( sz );

        // flip pad's layers
        m_dummyPad->SetLayerSet( FlipLayerMask( m_dummyPad->GetLayerSet() ) );
    }

    m_staticTextWarningPadFlipped->Show(m_isFlipped);

    m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
    m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );

    // Display current unit name in dialog:
    m_PadPosX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadPosY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadDrill_X_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadDrill_Y_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadShapeSizeX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadShapeSizeY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadShapeOffsetX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadShapeOffsetY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadShapeDelta_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_PadLengthDie_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );

    // Display current pad masks clearances units
    m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_ThermalWidthUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_ThermalGapUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );

    // Display current pad parameters units:
    PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
    PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );

    PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
    PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );

    PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
    PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );

    PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
    PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );

    if( m_dummyPad->GetDelta().x )
    {
        PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
        m_trapDeltaDirChoice->SetSelection( 0 );
    }
    else
//.........这里部分代码省略.........

bool BOARD_NETLIST_UPDATER::deleteSinglePadNets()
{
    int         count = 0;
    wxString    netname;
    wxString msg;
    D_PAD*      pad = NULL;
    D_PAD*      previouspad = NULL;

    // We need the pad list, for next tests.
    // padlist is the list of pads, sorted by netname.

    m_board->BuildListOfNets();

    if( m_isDryRun )
        return false;

    std::vector<D_PAD*> padlist = m_board->GetPads();

    for( unsigned kk = 0; kk < padlist.size(); kk++ )
    {
        pad = padlist[kk];

        if( pad->GetNetname().IsEmpty() )
                continue;

        if( netname != pad->GetNetname() )  // End of net
        {
            if( previouspad && count == 1 )
            {
                // First, see if we have a copper zone attached to this pad.
                // If so, this is not really a single pad net

                for( int ii = 0; ii < m_board->GetAreaCount(); ii++ )
                {
                    ZONE_CONTAINER* zone = m_board->GetArea( ii );

                    if( !zone->IsOnCopperLayer() )
                        continue;

                    if( zone->GetIsKeepout() )
                        continue;

                    if( zone->GetNet() == previouspad->GetNet() )
                    {
                        count++;
                        break;
                    }
                }

                if( count == 1 )    // Really one pad, and nothing else
                {
                    msg.Printf( _( "Remove single pad net %s." ),
                                GetChars( previouspad->GetNetname() ) );
                    m_reporter->Report( msg, REPORTER::RPT_ACTION );

                    msg.Printf( _( "Remove single pad net \"%s\" on \"%s\" pad '%s'\n" ),
                                GetChars( previouspad->GetNetname() ),
                                GetChars( previouspad->GetParent()->GetReference() ),
                                GetChars( previouspad->GetPadName() ) );
                    m_reporter->Report( msg, REPORTER::RPT_ACTION );

                    previouspad->SetNetCode( NETINFO_LIST::UNCONNECTED );
                }
            }

            netname = pad->GetNetname();
            count = 1;
        }
        else
        {
            count++;
        }

        previouspad = pad;
    }

    // Examine last pad
    if( pad && count == 1 )
        pad->SetNetCode( NETINFO_LIST::UNCONNECTED );

    return true;
}