C++ D_PAD::GetLocalClearance方法代码示例

PNS_PCBNEW_RULE_RESOLVER::PNS_PCBNEW_RULE_RESOLVER( BOARD* aBoard, PNS::ROUTER* aRouter ) :
    m_router( aRouter ),
    m_board( aBoard )
{
    PNS::NODE* world = m_router->GetWorld();

    PNS::TOPOLOGY topo( world );
    m_netClearanceCache.resize( m_board->GetNetCount() );

    // Build clearance cache for net classes
    for( unsigned int i = 0; i < m_board->GetNetCount(); i++ )
    {
        NETINFO_ITEM* ni = m_board->FindNet( i );

        if( ni == NULL )
            continue;

        CLEARANCE_ENT ent;
        ent.coupledNet = DpCoupledNet( i );

        wxString netClassName = ni->GetClassName();
        NETCLASSPTR nc = m_board->GetDesignSettings().m_NetClasses.Find( netClassName );

        int clearance = nc->GetClearance();
        ent.clearance = clearance;
        m_netClearanceCache[i] = ent;

        wxLogTrace( "PNS", "Add net %u netclass %s clearance %d", i, netClassName.mb_str(), clearance );
    }

    // Build clearance cache for pads
    for( MODULE* mod = m_board->m_Modules; mod ; mod = mod->Next() )
    {
        auto moduleClearance = mod->GetLocalClearance();

        for( D_PAD* pad = mod->PadsList(); pad; pad = pad->Next() )
        {
            int padClearance = pad->GetLocalClearance();

            if( padClearance > 0 )
                m_localClearanceCache[ pad ] = padClearance;

            else if( moduleClearance > 0 )
                m_localClearanceCache[ pad ] = moduleClearance;
        }
    }

    //printf("DefaultCL : %d\n",  m_board->GetDesignSettings().m_NetClasses.Find ("Default clearance")->GetClearance());

    m_overrideEnabled = false;
    m_defaultClearance = Millimeter2iu( 0.254 );    // m_board->m_NetClasses.Find ("Default clearance")->GetClearance();
    m_overrideNetA = 0;
    m_overrideNetB = 0;
    m_overrideClearance = 0;
    m_useDpGap = false;
}

void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
{
    if( !padValuesOK() )
        return;

    bool rastnestIsChanged = false;
    int  isign = m_isFlipped ? -1 : 1;

    transferDataToPad( m_padMaster );
    // m_padMaster is a pattern: ensure there is no net for this pad:
    m_padMaster->SetNetCode( NETINFO_LIST::UNCONNECTED );

    if( m_currentPad )   // Set current Pad parameters
    {
        wxSize  size;
        MODULE* module = m_currentPad->GetParent();

        m_parent->SaveCopyInUndoList( module, UR_CHANGED );
        module->SetLastEditTime();

        // redraw the area where the pad was, without pad (delete pad on screen)
        m_currentPad->SetFlags( DO_NOT_DRAW );
        m_parent->GetCanvas()->RefreshDrawingRect( m_currentPad->GetBoundingBox() );
        m_currentPad->ClearFlags( DO_NOT_DRAW );

        // Update values
        m_currentPad->SetShape( m_padMaster->GetShape() );
        m_currentPad->SetAttribute( m_padMaster->GetAttribute() );

        if( m_currentPad->GetPosition() != m_padMaster->GetPosition() )
        {
            m_currentPad->SetPosition( m_padMaster->GetPosition() );
            rastnestIsChanged = true;
        }

        // compute the pos 0 value, i.e. pad position for module with orientation = 0
        // i.e. relative to module origin (module position)
        wxPoint pt = m_currentPad->GetPosition() - module->GetPosition();

        RotatePoint( &pt, -module->GetOrientation() );

        m_currentPad->SetPos0( pt );

        m_currentPad->SetOrientation( m_padMaster->GetOrientation() * isign + module->GetOrientation() );

        m_currentPad->SetSize( m_padMaster->GetSize() );

        size = m_padMaster->GetDelta();
        size.y *= isign;
        m_currentPad->SetDelta( size );

        m_currentPad->SetDrillSize( m_padMaster->GetDrillSize() );
        m_currentPad->SetDrillShape( m_padMaster->GetDrillShape() );

        wxPoint offset = m_padMaster->GetOffset();
        offset.y *= isign;
        m_currentPad->SetOffset( offset );

        m_currentPad->SetPadToDieLength( m_padMaster->GetPadToDieLength() );

        if( m_currentPad->GetLayerSet() != m_padMaster->GetLayerSet() )
        {
            rastnestIsChanged = true;
            m_currentPad->SetLayerSet( m_padMaster->GetLayerSet() );
        }

        if( m_isFlipped )
            m_currentPad->SetLayerSet( FlipLayerMask( m_currentPad->GetLayerSet() ) );

        m_currentPad->SetPadName( m_padMaster->GetPadName() );

        wxString padNetname;

        // For PAD_HOLE_NOT_PLATED, ensure there is no net name selected
        if( m_padMaster->GetAttribute() != PAD_HOLE_NOT_PLATED  )
            padNetname = m_PadNetNameCtrl->GetValue();

        if( m_currentPad->GetNetname() != padNetname )
        {
            const NETINFO_ITEM* netinfo = m_board->FindNet( padNetname );

            if( !padNetname.IsEmpty() &&  netinfo == NULL )
            {
                DisplayError( NULL, _( "Unknown netname, netname not changed" ) );
            }
            else
            {
                rastnestIsChanged = true;
                m_currentPad->SetNetCode( netinfo->GetNet() );
            }
        }

        m_currentPad->SetLocalClearance( m_padMaster->GetLocalClearance() );
        m_currentPad->SetLocalSolderMaskMargin( m_padMaster->GetLocalSolderMaskMargin() );
        m_currentPad->SetLocalSolderPasteMargin( m_padMaster->GetLocalSolderPasteMargin() );
        m_currentPad->SetLocalSolderPasteMarginRatio( m_padMaster->GetLocalSolderPasteMarginRatio() );
        m_currentPad->SetZoneConnection( m_padMaster->GetZoneConnection() );
        m_currentPad->SetThermalWidth( m_padMaster->GetThermalWidth() );
        m_currentPad->SetThermalGap( m_padMaster->GetThermalGap() );

//.........这里部分代码省略.........

//.........这里部分代码省略.........
    // Display current pad masks clearances units
    m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_ThermalWidthUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_ThermalGapUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );

    // Display current pad parameters units:
    PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
    PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );

    PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
    PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );

    PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
    PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );

    PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
    PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );

    if( m_dummyPad->GetDelta().x )
    {
        PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
        m_trapDeltaDirChoice->SetSelection( 0 );
    }
    else
    {
        PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
        m_trapDeltaDirChoice->SetSelection( 1 );
    }

    PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );

    PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
    PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
    PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
    PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );

    // These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
    PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );

    if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
        m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );

    msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );

    if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
        // Sometimes Printf adds a sign if the value is small
        m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
    else
        m_SolderPasteMarginRatioCtrl->SetValue( msg );

    switch( m_dummyPad->GetZoneConnection() )
    {
    default:
    case UNDEFINED_CONNECTION:
        m_ZoneConnectionChoice->SetSelection( 0 );
        break;

    case PAD_IN_ZONE:
        m_ZoneConnectionChoice->SetSelection( 1 );
        break;

    case THERMAL_PAD:
        m_ZoneConnectionChoice->SetSelection( 2 );
        break;

void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
{
    wxPaintDC    dc( m_panelShowPad );
    PAD_DRAWINFO drawInfo;

    EDA_COLOR_T color = BLACK;

    if( m_dummyPad->GetLayerSet()[F_Cu] )
    {
        color = m_board->GetVisibleElementColor( PAD_FR_VISIBLE );
    }

    if( m_dummyPad->GetLayerSet()[B_Cu] )
    {
        color = ColorMix( color, m_board->GetVisibleElementColor( PAD_BK_VISIBLE ) );
    }

    // What could happen: the pad color is *actually* black, or no
    // copper was selected
    if( color == BLACK )
        color = LIGHTGRAY;

    drawInfo.m_Color     = color;
    drawInfo.m_HoleColor = DARKGRAY;
    drawInfo.m_Offset    = m_dummyPad->GetPosition();
    drawInfo.m_Display_padnum  = true;
    drawInfo.m_Display_netname = true;

    if( m_dummyPad->GetAttribute() == PAD_HOLE_NOT_PLATED )
        drawInfo.m_ShowNotPlatedHole = true;

    // Shows the local pad clearance
    drawInfo.m_PadClearance = m_dummyPad->GetLocalClearance();

    wxSize dc_size = dc.GetSize();
    dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );

    // Calculate a suitable scale to fit the available draw area
    int dim = m_dummyPad->GetSize().x + std::abs( m_dummyPad->GetDelta().y);

    if( m_dummyPad->GetLocalClearance() > 0 )
        dim += m_dummyPad->GetLocalClearance() * 2;

    double scale = (double) dc_size.x / dim;

    dim = m_dummyPad->GetSize().y + std::abs( m_dummyPad->GetDelta().x);
    if( m_dummyPad->GetLocalClearance() > 0 )
        dim += m_dummyPad->GetLocalClearance() * 2;

    double altscale = (double) dc_size.y / dim;
    scale = std::min( scale, altscale );

    // Give a margin
    scale *= 0.7;
    dc.SetUserScale( scale, scale );

    GRResetPenAndBrush( &dc );
    m_dummyPad->DrawShape( NULL, &dc, drawInfo );

    // Draw X and Y axis.
    // this is particularly useful to show the reference position of pads
    // with offset and no hole
    GRLine( NULL, &dc, -dim, 0, dim, 0, 0, BLUE );   // X axis
    GRLine( NULL, &dc, 0, -dim, 0, dim, 0, BLUE );   // Y axis

    event.Skip();
}

void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
{
    wxPaintDC    dc( m_panelShowPad );
    PAD_DRAWINFO drawInfo;

    EDA_COLOR_T color = BLACK;

    if( m_dummyPad->GetLayerSet()[F_Cu] )
    {
        color = m_board->GetVisibleElementColor( PAD_FR_VISIBLE );
    }

    if( m_dummyPad->GetLayerSet()[B_Cu] )
    {
        color = ColorMix( color, m_board->GetVisibleElementColor( PAD_BK_VISIBLE ) );
    }

    // What could happen: the pad color is *actually* black, or no
    // copper was selected
    if( color == BLACK )
        color = LIGHTGRAY;

    drawInfo.m_Color     = color;
    drawInfo.m_HoleColor = DARKGRAY;
    drawInfo.m_Offset    = m_dummyPad->GetPosition();
    drawInfo.m_Display_padnum  = true;
    drawInfo.m_Display_netname = true;

    if( m_dummyPad->GetAttribute() == PAD_HOLE_NOT_PLATED )
        drawInfo.m_ShowNotPlatedHole = true;

    // Shows the local pad clearance
    drawInfo.m_PadClearance = m_dummyPad->GetLocalClearance();

    wxSize dc_size = dc.GetSize();
    dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );

    // Calculate a suitable scale to fit the available draw area
    int dim = m_dummyPad->GetSize().x + std::abs( m_dummyPad->GetDelta().y );

    // Invalid x size. User could enter zero, or have deleted all text prior to
    // entering a new value; this is also treated as zero. If dim is left at
    // zero, the drawing scale is zero and we get a crash.
    if( dim == 0 )
    {
        // If drill size has been set, use that. Otherwise default to 1mm.
        dim = m_dummyPad->GetDrillSize().x;
        if( dim == 0 )
            dim = 1000000;
    }

    if( m_dummyPad->GetLocalClearance() > 0 )
        dim += m_dummyPad->GetLocalClearance() * 2;

    double scale = (double) dc_size.x / dim;

    // If the pad is a circle, use the x size here instead.
    int ysize;
    if( m_dummyPad->GetShape() == PAD_CIRCLE )
        ysize = m_dummyPad->GetSize().x;
    else
        ysize = m_dummyPad->GetSize().y;

    dim = ysize + std::abs( m_dummyPad->GetDelta().x );

    // Invalid y size. See note about x size above.
    if( dim == 0 )
    {
        dim = m_dummyPad->GetDrillSize().y;
        if( dim == 0 )
            dim = 1000000;
    }

    if( m_dummyPad->GetLocalClearance() > 0 )
        dim += m_dummyPad->GetLocalClearance() * 2;

    double altscale = (double) dc_size.y / dim;
    scale = std::min( scale, altscale );

    // Give a margin
    scale *= 0.7;
    dc.SetUserScale( scale, scale );

    GRResetPenAndBrush( &dc );
    m_dummyPad->DrawShape( NULL, &dc, drawInfo );

    // Draw X and Y axis.
    // this is particularly useful to show the reference position of pads
    // with offset and no hole
    GRLine( NULL, &dc, -dim, 0, dim, 0, 0, BLUE );   // X axis
    GRLine( NULL, &dc, 0, -dim, 0, dim, 0, BLUE );   // Y axis

    event.Skip();
}

void D_PAD::ImportSettingsFromMaster( const D_PAD& aMasterPad )
{
    SetShape( aMasterPad.GetShape() );
    SetLayerSet( aMasterPad.GetLayerSet() );
    SetAttribute( aMasterPad.GetAttribute() );

    // The pad orientation, for historical reasons is the
    // pad rotation + parent rotation.
    // So we have to manage this parent rotation
    double pad_rot = aMasterPad.GetOrientation();

    if( aMasterPad.GetParent() )
        pad_rot -= aMasterPad.GetParent()->GetOrientation();

    if( GetParent() )
        pad_rot += GetParent()->GetOrientation();

    SetOrientation( pad_rot );

    SetSize( aMasterPad.GetSize() );
    SetDelta( wxSize( 0, 0 ) );
    SetOffset( aMasterPad.GetOffset() );
    SetDrillSize( aMasterPad.GetDrillSize() );
    SetDrillShape( aMasterPad.GetDrillShape() );
    SetRoundRectRadiusRatio( aMasterPad.GetRoundRectRadiusRatio() );
    SetChamferRectRatio( aMasterPad.GetChamferRectRatio() );
    SetChamferPositions( aMasterPad.GetChamferPositions() );

    switch( aMasterPad.GetShape() )
    {
    case PAD_SHAPE_TRAPEZOID:
        SetDelta( aMasterPad.GetDelta() );
        break;

    case PAD_SHAPE_CIRCLE:
        // ensure size.y == size.x
        SetSize( wxSize( GetSize().x, GetSize().x ) );
        break;

    default:
        ;
    }

    switch( aMasterPad.GetAttribute() )
    {
    case PAD_ATTRIB_SMD:
    case PAD_ATTRIB_CONN:
        // These pads do not have hole (they are expected to be only on one
        // external copper layer)
        SetDrillSize( wxSize( 0, 0 ) );
        break;

    default:
        ;
    }

    // copy also local settings:
    SetLocalClearance( aMasterPad.GetLocalClearance() );
    SetLocalSolderMaskMargin( aMasterPad.GetLocalSolderMaskMargin() );
    SetLocalSolderPasteMargin( aMasterPad.GetLocalSolderPasteMargin() );
    SetLocalSolderPasteMarginRatio( aMasterPad.GetLocalSolderPasteMarginRatio() );

    SetZoneConnection( aMasterPad.GetZoneConnection() );
    SetThermalWidth( aMasterPad.GetThermalWidth() );
    SetThermalGap( aMasterPad.GetThermalGap() );

    // Add or remove custom pad shapes:
    SetPrimitives( aMasterPad.GetPrimitives() );
    SetAnchorPadShape( aMasterPad.GetAnchorPadShape() );
    MergePrimitivesAsPolygon();
}