C++ D_PAD::GetPadToDieLength方法代码示例

//.........这里部分代码省略.........
    m_PadLengthDie_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );

    // Display current pad masks clearances units
    m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_ThermalWidthUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
    m_ThermalGapUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );

    // Display current pad parameters units:
    PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
    PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );

    PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
    PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );

    PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
    PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );

    PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
    PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );

    if( m_dummyPad->GetDelta().x )
    {
        PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
        m_trapDeltaDirChoice->SetSelection( 0 );
    }
    else
    {
        PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
        m_trapDeltaDirChoice->SetSelection( 1 );
    }

    PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );

    PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
    PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
    PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
    PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );

    // These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
    PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );

    if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
        m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );

    msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );

    if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
        // Sometimes Printf adds a sign if the value is small
        m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
    else
        m_SolderPasteMarginRatioCtrl->SetValue( msg );

    switch( m_dummyPad->GetZoneConnection() )
    {
    default:
    case UNDEFINED_CONNECTION:
        m_ZoneConnectionChoice->SetSelection( 0 );
        break;

    case PAD_IN_ZONE:
        m_ZoneConnectionChoice->SetSelection( 1 );
        break;

    case THERMAL_PAD:

void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
{
    if( !padValuesOK() )
        return;

    bool rastnestIsChanged = false;
    int  isign = m_isFlipped ? -1 : 1;

    transferDataToPad( m_padMaster );
    // m_padMaster is a pattern: ensure there is no net for this pad:
    m_padMaster->SetNetCode( NETINFO_LIST::UNCONNECTED );

    if( m_currentPad )   // Set current Pad parameters
    {
        wxSize  size;
        MODULE* module = m_currentPad->GetParent();

        m_parent->SaveCopyInUndoList( module, UR_CHANGED );
        module->SetLastEditTime();

        // redraw the area where the pad was, without pad (delete pad on screen)
        m_currentPad->SetFlags( DO_NOT_DRAW );
        m_parent->GetCanvas()->RefreshDrawingRect( m_currentPad->GetBoundingBox() );
        m_currentPad->ClearFlags( DO_NOT_DRAW );

        // Update values
        m_currentPad->SetShape( m_padMaster->GetShape() );
        m_currentPad->SetAttribute( m_padMaster->GetAttribute() );

        if( m_currentPad->GetPosition() != m_padMaster->GetPosition() )
        {
            m_currentPad->SetPosition( m_padMaster->GetPosition() );
            rastnestIsChanged = true;
        }

        // compute the pos 0 value, i.e. pad position for module with orientation = 0
        // i.e. relative to module origin (module position)
        wxPoint pt = m_currentPad->GetPosition() - module->GetPosition();

        RotatePoint( &pt, -module->GetOrientation() );

        m_currentPad->SetPos0( pt );

        m_currentPad->SetOrientation( m_padMaster->GetOrientation() * isign + module->GetOrientation() );

        m_currentPad->SetSize( m_padMaster->GetSize() );

        size = m_padMaster->GetDelta();
        size.y *= isign;
        m_currentPad->SetDelta( size );

        m_currentPad->SetDrillSize( m_padMaster->GetDrillSize() );
        m_currentPad->SetDrillShape( m_padMaster->GetDrillShape() );

        wxPoint offset = m_padMaster->GetOffset();
        offset.y *= isign;
        m_currentPad->SetOffset( offset );

        m_currentPad->SetPadToDieLength( m_padMaster->GetPadToDieLength() );

        if( m_currentPad->GetLayerSet() != m_padMaster->GetLayerSet() )
        {
            rastnestIsChanged = true;
            m_currentPad->SetLayerSet( m_padMaster->GetLayerSet() );
        }

        if( m_isFlipped )
            m_currentPad->SetLayerSet( FlipLayerMask( m_currentPad->GetLayerSet() ) );

        m_currentPad->SetPadName( m_padMaster->GetPadName() );

        wxString padNetname;

        // For PAD_HOLE_NOT_PLATED, ensure there is no net name selected
        if( m_padMaster->GetAttribute() != PAD_HOLE_NOT_PLATED  )
            padNetname = m_PadNetNameCtrl->GetValue();

        if( m_currentPad->GetNetname() != padNetname )
        {
            const NETINFO_ITEM* netinfo = m_board->FindNet( padNetname );

            if( !padNetname.IsEmpty() &&  netinfo == NULL )
            {
                DisplayError( NULL, _( "Unknown netname, netname not changed" ) );
            }
            else
            {
                rastnestIsChanged = true;
                m_currentPad->SetNetCode( netinfo->GetNet() );
            }
        }

        m_currentPad->SetLocalClearance( m_padMaster->GetLocalClearance() );
        m_currentPad->SetLocalSolderMaskMargin( m_padMaster->GetLocalSolderMaskMargin() );
        m_currentPad->SetLocalSolderPasteMargin( m_padMaster->GetLocalSolderPasteMargin() );
        m_currentPad->SetLocalSolderPasteMarginRatio( m_padMaster->GetLocalSolderPasteMarginRatio() );
        m_currentPad->SetZoneConnection( m_padMaster->GetZoneConnection() );
        m_currentPad->SetThermalWidth( m_padMaster->GetThermalWidth() );
        m_currentPad->SetThermalGap( m_padMaster->GetThermalGap() );

//.........这里部分代码省略.........

void NETINFO_ITEM::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
    int       count;
    EDA_ITEM* Struct;
    wxString  txt;
    MODULE*   module;
    D_PAD*    pad;
    double    lengthnet = 0;        // This  is the lenght of tracks on pcb
    double    lengthPadToDie = 0;   // this is the lenght of internal ICs connections

    aList.push_back( MSG_PANEL_ITEM( _( "Net Name" ), GetNetname(), RED ) );

    txt.Printf( wxT( "%d" ), GetNet() );
    aList.push_back( MSG_PANEL_ITEM( _( "Net Code" ), txt, RED ) );

    count  = 0;
    module = m_parent->GetBoard()->m_Modules;

    for( ; module != 0; module = module->Next() )
    {
        for( pad = module->Pads(); pad != 0; pad = pad->Next() )
        {
            if( pad->GetNetCode() == GetNet() )
            {
                count++;
                lengthPadToDie += pad->GetPadToDieLength();
            }
        }
    }

    txt.Printf( wxT( "%d" ), count );
    aList.push_back( MSG_PANEL_ITEM( _( "Pads" ), txt, DARKGREEN ) );

    count  = 0;
    Struct = m_parent->GetBoard()->m_Track;

    for( ; Struct != NULL; Struct = Struct->Next() )
    {
        if( Struct->Type() == PCB_VIA_T )
        {
            if( ( (SEGVIA*) Struct )->GetNetCode() == GetNet() )
                count++;
        }

        if( Struct->Type() == PCB_TRACE_T )
        {
            if( ( (TRACK*) Struct )->GetNetCode() == GetNet() )
                lengthnet += ( (TRACK*) Struct )->GetLength();
        }
    }

    txt.Printf( wxT( "%d" ), count );
    aList.push_back( MSG_PANEL_ITEM( _( "Vias" ), txt, BLUE ) );

    // Displays the full net length (tracks on pcb + internal ICs connections ):
    txt = ::CoordinateToString( lengthnet + lengthPadToDie );
    aList.push_back( MSG_PANEL_ITEM( _( "Net Length:" ), txt, RED ) );

    // Displays the net length of tracks only:
    txt = ::CoordinateToString( lengthnet );
    aList.push_back( MSG_PANEL_ITEM( _( "On Board" ), txt, RED ) );

    // Displays the net length of internal ICs connections (wires inside ICs):
    txt = ::CoordinateToString( lengthPadToDie );
    aList.push_back( MSG_PANEL_ITEM( _( "In Package" ), txt, RED ) );
}