C++ BinaryInput::readString方法代码示例

void ServerDescription::deserialize(BinaryInput& b) {
    serverName      = b.readString();
    applicationAddress.deserialize(b);
    applicationName = b.readString();
    maxClients      = b.readInt32();
    debugAssert(maxClients >= 0);
    currentClients  = b.readInt32();
    data            = b.readString();
    lastUpdateTime  = System::time();
}

void MD2Model::Part::loadTextureFilenames(BinaryInput& b, int num, int offset) {

    _textureFilenames.resize(num);
    b.setPosition(offset);
    for (int t = 0; t < num; ++t) {
        _textureFilenames[t] = b.readString();
    }
}

void readHeader(BinaryInput& b, const String& expectedString) {

    const String header = b.readString(SpeedLoad::HEADER_LENGTH);

    (void)header;
    alwaysAssertM(header == expectedString, 
                  format("SpeedLoad expected to read chunk \"%s\" but found chunk \"%s\"",
                         expectedString.c_str(), header.c_str()));
}

void GImage::decodeBMP(
    BinaryInput&            input) {

    // The BMP decoding uses these flags.
    static const uint16 PICTURE_NONE               = 0x0000;
    static const uint16 PICTURE_BITMAP             = 0x1000;

    // Compression Flags
    static const uint16 PICTURE_UNCOMPRESSED       = 0x0100;
    static const uint16 PICTURE_MONOCHROME         = 0x0001;
    static const uint16 PICTURE_4BIT               = 0x0002;
    static const uint16 PICTURE_8BIT               = 0x0004;
    static const uint16 PICTURE_16BIT              = 0x0008;
    static const uint16 PICTURE_24BIT              = 0x0010;
    static const uint16 PICTURE_32BIT              = 0x0020;

    (void)PICTURE_16BIT;
    (void)PICTURE_32BIT;

    // This is a simple BMP loader that can handle uncompressed BMP files.
    // Verify this is a BMP file by looking for the BM tag.
    input.reset();
    std::string tag = input.readString(2);
    if (tag != "BM") {
        throw Error("Not a BMP file", input.getFilename());
    }

    m_channels = 3;
	// Skip to the BITMAPINFOHEADER's width and height
	input.skip(16);

    m_width  = input.readUInt32();
    m_height = input.readUInt32();

	// Skip to the bit count and compression type
	input.skip(2);

    uint16 bitCount        = input.readUInt16();
    uint32 compressionType = input.readUInt32();

    uint8 red;
    uint8 green;
    uint8 blue;
    uint8 blank;

	// Only uncompressed bitmaps are supported by this code
    if ((int32)compressionType != BI_RGB) {
        throw Error("BMP images must be uncompressed", input.getFilename());
    }

    uint8* palette = NULL;

	// Create the palette if needed
    if (bitCount <= 8) {

        // Skip to the palette color count in the header
        input.skip(12);

        int numColors = input.readUInt32();

        palette = (uint8*)System::malloc(numColors * 3);
        debugAssert(palette);

        // Skip past the end of the header to the palette info
        input.skip(4);

        int c;
        for (c = 0; c < numColors * 3; c += 3) {
            // Palette information in bitmaps is stored in BGR_ format.
            // That means it's blue-green-red-blank, for each entry.
            blue  = input.readUInt8();
            green = input.readUInt8();
            red   = input.readUInt8();
            blank = input.readUInt8();

            palette[c]     = red;
            palette[c + 1] = green;
            palette[c + 2] = blue;
        }
	}

    int hStart = 0;
    int hEnd   = 0;
    int hDir   = 0;

    if (m_height < 0) {
        m_height = -m_height;
        hStart = 0;
        hEnd   = m_height;
        hDir   = 1;
    } else {
        //height = height;
        hStart = m_height - 1;
        hEnd   = -1;
        hDir   = -1;
    }

    m_byte = (uint8*)m_memMan->alloc(m_width * m_height * 3);
    debugAssert(m_byte);

//.........这里部分代码省略.........

	void deserialize(BinaryInput& b) {
		i32 = b.readInt32();
		i64 = b.readInt64();
		s   = b.readString();
		f	= b.readFloat32();
	}

void GImage::decodeTGA(
    BinaryInput&        input) {

    // This is a simple TGA loader that can handle uncompressed
    // truecolor TGA files (TGA type 2).
    // Verify this is a TGA file by looking for the TRUEVISION tag.
    int pos = input.getPosition();
    input.setPosition(input.size() - 18);
    std::string tag = input.readString(16);
    if (tag != "TRUEVISION-XFILE") {
        throw Error("Not a TGA file", input.getFilename());
    }

    input.setPosition(pos);

    int IDLength     = input.readUInt8();
    int colorMapType = input.readUInt8();
    int imageType    = input.readUInt8();

    (void)colorMapType;

    // 2 is the type supported by this routine.
    if (imageType != 2 && imageType != 10) {
        throw Error("TGA images must be type 2 (Uncompressed truecolor) or 10 (Run-length truecolor)", input.getFilename());
    }

    // Color map specification
    input.skip(5);

    // Image specification

    // Skip x and y offsets
    input.skip(4);

    m_width  = input.readInt16();
    m_height = input.readInt16();

    int colorDepth = input.readUInt8();

    if ((colorDepth != 24) && (colorDepth != 32)) {
        throw Error("TGA files must be 24 or 32 bit.", input.getFilename());
    }

    if (colorDepth == 32) {
        m_channels = 4;
    } else {
        m_channels = 3;
    }

    // Image descriptor contains overlay data as well
    // as data indicating where the origin is
    int imageDescriptor = input.readUInt8();
    (void)imageDescriptor;

    // Image ID
    input.skip(IDLength);

    m_byte = (uint8*)m_memMan->alloc(m_width * m_height * m_channels);
    debugAssert(m_byte);

    // Pixel data
    int x;
    int y;

    if (imageType == 2) {
        // Uncompressed
        if (m_channels == 3) {
            for (y = m_height - 1; y >= 0; --y) {
              for (x = 0; x < m_width; ++x) {
                int i = (x + y * m_width) * 3;
                readBGR(m_byte + i, input);
              }
            }
        } else {
            for (y = m_height - 1; y >= 0; --y) {
              for (x = 0; x < m_width; ++x) {
                 int i = (x + y * m_width) * 4;
                 readBGRA(m_byte + i, input);
              }
            }
        }
    } else if (imageType == 10) {

        // Run-length encoded
        for (y = m_height - 1; y >= 0; --y) {
            for (int x = 0; x < m_width; /* intentionally no x increment */) {
                // The specification guarantees that no packet will wrap past the end of a row
                const uint8 repetitionCount = input.readUInt8();
                const uint8 numValues = (repetitionCount & (~128)) + 1;
                int byteOffset = (x + y * m_width) * 3;

                if (repetitionCount & 128) {
                    // When the high bit is 1, this is a run-length packet
                    if (m_channels == 3) {
                        Color3uint8 value;
                        readBGR((uint8*)(&value), input);
                        for (int i = 0; i < numValues; ++i, ++x) {
                            for (int b = 0; b < 3; ++b, ++byteOffset) {
                                m_byte[byteOffset] = value[b];
                            }
//.........这里部分代码省略.........

 void deserialize(BinaryInput& b) {
     scale.deserialize(b);
     translate.deserialize(b);
     name = b.readString(16);
 }

void GImage::decodeTGA(
    BinaryInput&        input) {

    // This is a simple TGA loader that can handle uncompressed
    // truecolor TGA files (TGA type 2). 
    // Verify this is a TGA file by looking for the TRUEVISION tag.
    int pos = input.getPosition();
    input.setPosition(input.size() - 18);
    std::string tag = input.readString(16);
    if (tag != "TRUEVISION-XFILE") {
        throw Error("Not a TGA file", input.getFilename());
    }

    input.setPosition(pos);

    int IDLength     = input.readUInt8();
    int colorMapType = input.readUInt8();
    int imageType    = input.readUInt8();

    (void)colorMapType;
	
    // 2 is the type supported by this routine.
    if (imageType != 2) {
        throw Error("TGA images must be type 2 (Uncompressed truecolor)", input.getFilename());
    }
	
    // Color map specification
    input.skip(5);

    // Image specification

    // Skip x and y offsets
    input.skip(4); 

    m_width  = input.readInt16();
    m_height = input.readInt16();

    int colorDepth = input.readUInt8();

    if ((colorDepth != 24) && (colorDepth != 32)) {
        throw Error("TGA files must be 24 or 32 bit.", input.getFilename());
    }

    if (colorDepth == 32) {
        m_channels = 4;
    } else {
        m_channels = 3;
    }

    // Image descriptor contains overlay data as well
    // as data indicating where the origin is
    int imageDescriptor = input.readUInt8();
    (void)imageDescriptor;
	
    // Image ID
    input.skip(IDLength);

    m_byte = (uint8*)m_memMan->alloc(m_width * m_height * m_channels);
    debugAssert(m_byte);
	
    // Pixel data
    int x;
    int y;

    if (m_channels == 3) {
        for (y = m_height - 1; y >= 0; --y) {
          for (x = 0; x < m_width; ++x) {
            int b = input.readUInt8();
            int g = input.readUInt8();
            int r = input.readUInt8();
		    
            int i = (x + y * m_width) * 3;
            m_byte[i + 0] = r;
            m_byte[i + 1] = g;
            m_byte[i + 2] = b;
          }
        }
    } else {
        for (y = m_height - 1; y >= 0; --y) {
          for (x = 0; x < m_width; ++x) {
            int b = input.readUInt8();
            int g = input.readUInt8();
            int r = input.readUInt8();
            int a = input.readUInt8();
		    
            int i = (x + y * m_width) * 4;
            m_byte[i + 0] = r;
            m_byte[i + 1] = g;
            m_byte[i + 2] = b;
            m_byte[i + 3] = a;
          }
        }
    }
}