本文整理汇总了C++中Account::accountFriendlyName方法的典型用法代码示例。如果您正苦于以下问题：C++ Account::accountFriendlyName方法的具体用法？C++ Account::accountFriendlyName怎么用？C++ Account::accountFriendlyName使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Account的用法示例。
在下文中一共展示了Account::accountFriendlyName方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: beginResetModel
void
AccountModel::loadData()
{
beginResetModel();
qDeleteAll( m_accounts );
m_accounts.clear();
// Add all factories
QList< AccountFactory* > factories = AccountManager::instance()->factories();
QList< Account* > allAccounts = AccountManager::instance()->accounts();
#if ACCOUNTMODEL_DEBUG
qDebug() << Q_FUNC_INFO;
qDebug() << "All accounts:";
foreach ( Account* acct, allAccounts )
qDebug() << acct->accountFriendlyName() << "\t" << acct->accountId();
#endif
foreach ( AccountFactory* fac, factories )
{
if ( !fac->allowUserCreation() )
continue;
qDebug() << "Creating factory node:" << fac->prettyName();
m_accounts << new AccountModelNode( fac );
// remove the accounts we are dealing with
foreach ( Account* acct, allAccounts )
{
if ( AccountManager::instance()->factoryForAccount( acct ) == fac )
allAccounts.removeAll( acct );
}
}
// add all attica resolvers (installed or uninstalled)
Attica::Content::List fromAttica = AtticaManager::instance()->resolvers();
foreach ( const Attica::Content& content, fromAttica )
{
qDebug() << "Loading ATTICA ACCOUNT with content:" << content.id() << content.name();
if ( AtticaManager::instance()->hasCustomAccountForAttica( content.id() ) )
{
Account* acct = AtticaManager::instance()->customAccountForAttica( content.id() );
Q_ASSERT( acct );
if ( acct )
{
m_accounts << new AccountModelNode( acct );
const int removed = allAccounts.removeAll( acct );
#if ACCOUNTMODEL_DEBUG
qDebug() << "Removed custom account from misc accounts list, found:" << removed;
qDebug() << "All accounts after remove:";
foreach ( Account* acct, allAccounts )
qDebug() << acct->accountFriendlyName() << "\t" << acct->accountId(); // All other accounts we haven't dealt with yet
#else
Q_UNUSED( removed );
#endif
}
} else
{
m_accounts << new AccountModelNode( content );
foreach ( Account* acct, AccountManager::instance()->accounts( Accounts::ResolverType ) )
{
#if ACCOUNTMODEL_DEBUG
qDebug() << "Found ResolverAccount" << acct->accountFriendlyName();
#endif
if ( AtticaResolverAccount* resolver = qobject_cast< AtticaResolverAccount* >( acct ) )
{
#if ACCOUNTMODEL_DEBUG
qDebug() << "Which is an attica resolver with id:" << resolver->atticaId();
#endif
if ( resolver->atticaId() == content.id() )
{
allAccounts.removeAll( acct );
}
}
}
}示例2: checkRect
void
AccountFactoryWrapperDelegate::paint(QPainter* painter, const QStyleOptionViewItem& option, const QModelIndex& index) const
{
QStyleOptionViewItemV4 opt = option;
initStyleOption( &opt, index );
const int center = opt.rect.height() / 2 + opt.rect.top();
const int topIcon = center - ICON_SIZE/2;
// draw the background
const QWidget* w = opt.widget;
QStyle* style = w ? w->style() : QApplication::style();
style->drawPrimitive( QStyle::PE_PanelItemViewItem, &opt, painter, w );
Account* acc = qobject_cast< Account* >( index.data( AccountFactoryWrapper::AccountRole ).value< QObject* >() );
Q_ASSERT( acc );
// Checkbox on left edge, then text
const QRect checkRect( PADDING/4, PADDING/4 + opt.rect.top(), opt.rect.height() - PADDING/4, opt.rect.height() - PADDING/4 );
m_cachedCheckRects[ index ] = checkRect;
QStyleOptionViewItemV4 opt2 = opt;
opt2.rect = checkRect;
opt.checkState == Qt::Checked ? opt2.state |= QStyle::State_On : opt2.state |= QStyle::State_Off;
style->drawPrimitive( QStyle::PE_IndicatorViewItemCheck, &opt2, painter, w );
// name on left
painter->drawText( opt.rect.adjusted( checkRect.right() + PADDING, PADDING, -PADDING, -PADDING ), Qt::AlignLeft | Qt::AlignVCenter, acc->accountFriendlyName() );
// remove, config, status on right
const QRect pmRect( opt.rect.right() - PADDING - ICON_SIZE, topIcon, ICON_SIZE, ICON_SIZE );
painter->drawPixmap( pmRect, TomahawkUtils::defaultPixmap( TomahawkUtils::ListRemove, TomahawkUtils::Original, pmRect.size() ) );
m_cachedButtonRects[ index ] = pmRect;
const QRect confRect( pmRect.left() - PADDING - CONFIG_WRENCH_SIZE, center - CONFIG_WRENCH_SIZE/2, CONFIG_WRENCH_SIZE, CONFIG_WRENCH_SIZE );
QStyleOptionToolButton topt;
topt.rect = confRect;
topt.pos = confRect.topLeft();
topt.font = opt.font;
topt.icon = ImageRegistry::instance()->pixmap( RESPATH "images/configure.svg", QSize( CONFIG_WRENCH_SIZE - 8, CONFIG_WRENCH_SIZE - 8 ) );
topt.iconSize = QSize( CONFIG_WRENCH_SIZE - 8, CONFIG_WRENCH_SIZE - 8 );
topt.subControls = QStyle::SC_ToolButton;
topt.activeSubControls = QStyle::SC_None;
topt.features = QStyleOptionToolButton::None;
bool pressed = ( m_configPressed == opt.index );
topt.state = pressed ? QStyle::State_On : QStyle::State_Raised;
if( opt.state & QStyle::State_MouseOver || pressed )
topt.state |= QStyle::State_HasFocus;
style->drawComplexControl( QStyle::CC_ToolButton, &topt, painter, w );
m_cachedConfigRects[ index ] = confRect;
QPixmap p;
QString statusText;
Account::ConnectionState state = acc->connectionState();
const QRect connectIconRect( confRect.left() - PADDING - ICON_SIZE, topIcon, ICON_SIZE, ICON_SIZE );
if ( state == Account::Connected )
{
p = TomahawkUtils::defaultPixmap( TomahawkUtils::SipPluginOnline, TomahawkUtils::Original, connectIconRect.size() );
statusText = tr( "Online" );
}
else if ( state == Account::Connecting )
{
p = TomahawkUtils::defaultPixmap( TomahawkUtils::SipPluginOffline, TomahawkUtils::Original, connectIconRect.size() );
statusText = tr( "Connecting..." );
}
else
{
p = TomahawkUtils::defaultPixmap( TomahawkUtils::SipPluginOffline, TomahawkUtils::Original, connectIconRect.size() );
statusText = tr( "Offline" );
}
painter->drawPixmap( connectIconRect, p );
int width = painter->fontMetrics().width( statusText );
painter->drawText( QRect( connectIconRect.left() - PADDING - width, center - painter->fontMetrics().height()/2, width, painter->fontMetrics().height() ), statusText );
}