C++ ShuttleGui::TieNumericTextBox方法代碼示例

/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
   S.StartMultiColumn(2, wxCENTER);
   {
      S.TieChoice(_("Waveform") + wxString(wxT(":")), waveform,  waveforms);
      S.SetSizeHints(-1, -1);

      // The added colon to improve visual consistency was placed outside 
      // the translatable strings to avoid breaking translations close to 2.0. 
      // TODO: Make colon part of the translatable string after 2.0.
      S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 5);
      S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 5);
      S.AddPrompt(_("Duration") + wxString(wxT(":")));
      if (mToneDurationT == NULL)
      {
         mToneDurationT = new
         TimeTextCtrl(this,
                      wxID_ANY,
                      wxT(""),
                      mDuration,
                      mEffect->mProjectRate,
                      wxDefaultPosition,
                      wxDefaultSize,
                      true);
         mToneDurationT->SetName(_("Duration"));
         mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
         mToneDurationT->EnableMenu();
      }
      S.AddWindow(mToneDurationT);
   }
   S.EndMultiColumn();
}

void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
   S.StartMultiColumn(2, wxCENTER);
   {
      S.TieChoice(_("Noise type:"), nType, nTypeList);
      S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
      S.AddPrompt(_("Duration") + wxString(wxT(":")));
      if (mNoiseDurationT == NULL)
      {
         mNoiseDurationT = new
            NumericTextCtrl(NumericConverter::TIME, this,
                      wxID_ANY,
                      wxT(""),
                      nDuration,
                      mEffect->mProjectRate,
                      wxDefaultPosition,
                      wxDefaultSize,
                      true);
         /* use this instead of "seconds" because if a selection is passed to
          * the effect, I want it (nDuration) to be used as the duration, and
          * with "seconds" this does not always work properly. For example,
          * it rounds down to zero... */
         mNoiseDurationT->SetName(_("Duration"));
         mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
         mNoiseDurationT->EnableMenu();
      }
      S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
   }
   S.EndMultiColumn();
}

void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
   wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
   vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));

   S.AddTitle(_("by Salvo Ventura"));

   S.StartMultiColumn(2, wxEXPAND);
   {
      mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfStringT->SetValidator(vldDtmf);

      // The added colon to improve visual consistency was placed outside 
      // the translatable strings to avoid breaking translations close to 2.0. 
      // TODO: Make colon part of the translatable string after 2.0.
      S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")),  dAmplitude, 10);

      S.AddPrompt(_("Duration:"));
      if (mDtmfDurationT == NULL)
      {
         mDtmfDurationT = new
            TimeTextCtrl(this,
                         ID_DTMF_DURATION_TEXT,
                         wxT(""),
                         dDuration,
                         mEffect->mProjectRate,
                         wxDefaultPosition,
                         wxDefaultSize,
                         true);
         /* use this instead of "seconds" because if a selection is passed to the
         * effect, I want it (dDuration) to be used as the duration, and with
         * "seconds" this does not always work properly. For example, it rounds
         * down to zero... */
         mDtmfDurationT->SetName(_("Duration"));
         mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
         mDtmfDurationT->EnableMenu();
      }
      S.AddWindow(mDtmfDurationT);

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);

      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"),  (int) dTone * 1000), false);
      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
   }
   S.EndMultiColumn();
}

void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);

   S.StartStatic(_("Temporary files directory"));
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(1);

         S.Id(TempDirID);
         mTempDir = S.TieTextBox(_("&Location:"),
                                 wxT("/Directories/TempDir"),
                                 wxT(""),
                                 30);
         S.Id(ChooseButtonID);
         S.AddButton(_("C&hoose..."));

         S.AddFixedText(_("Free Space:"));
         mFreeSpace = S.AddVariableText(wxT(""));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

#ifdef DEPRECATED_AUDIO_CACHE
   // See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
   S.StartStatic(_("Audio cache"));
   {
      S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
                    wxT("/Directories/CacheBlockFiles"),
                    false);

      S.StartTwoColumn();
      {
         S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
                             wxT("/Directories/CacheLowMem"),
                             16,
                             9);
      }
      S.EndTwoColumn();

      S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
   }
   S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}

void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
   mPopulating = true;

   S.SetBorder(2);

   // S.StartStatic(_("Track Settings"));
   // {

   mDefaultsCheckbox = 0;
   if (mWt) {
      /* i18n-hint: use is a verb */
      mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
   }

   S.StartStatic(_("Scale"));
   {
      S.StartTwoColumn();
      {
         S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
            *(int*)&mTempSettings.scaleType,
            &mScaleChoices);

         mMinFreq =
            S.Id(ID_MINIMUM).TieNumericTextBox(_("Mi&nimum Frequency (Hz):"),
            mTempSettings.minFreq,
            12);

         mMaxFreq =
            S.Id(ID_MAXIMUM).TieNumericTextBox(_("Ma&ximum Frequency (Hz):"),
            mTempSettings.maxFreq,
            12);
      }
      S.EndTwoColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Colors"));
   {
      S.StartTwoColumn();
      {
         mGain =
            S.Id(ID_GAIN).TieNumericTextBox(_("&Gain (dB):"),
            mTempSettings.gain,
            8);

         mRange =
            S.Id(ID_RANGE).TieNumericTextBox(_("&Range (dB):"),
            mTempSettings.range,
            8);

         mFrequencyGain =
            S.Id(ID_FREQUENCY_GAIN).TieNumericTextBox(_("Frequency g&ain (dB/dec):"),
            mTempSettings.frequencyGain,
            4);
      }

      S.Id(ID_GRAYSCALE).TieCheckBox(_("S&how the spectrum using grayscale colors"),
         mTempSettings.isGrayscale);

      S.EndTwoColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Algorithm"));
   {
      S.StartMultiColumn(2);
      {
         mAlgorithmChoice =
            S.Id(ID_ALGORITHM).TieChoice(_("A&lgorithm") + wxString(wxT(":")),
            *(int*)&mTempSettings.algorithm,
            &mAlgorithmChoices);

         S.Id(ID_WINDOW_SIZE).TieChoice(_("Window &size:"),
            mTempSettings.windowSize,
            &mSizeChoices);
         S.SetSizeHints(mSizeChoices);

         S.Id(ID_WINDOW_TYPE).TieChoice(_("Window &type:"),
            mTempSettings.windowType,
            &mTypeChoices);
         S.SetSizeHints(mTypeChoices);

#ifdef EXPERIMENTAL_ZERO_PADDED_SPECTROGRAMS
         mZeroPaddingChoiceCtrl =
            S.Id(ID_PADDING_SIZE).TieChoice(_("&Zero padding factor") + wxString(wxT(":")),
            mTempSettings.zeroPaddingFactor,
            &mZeroPaddingChoices);
         S.SetSizeHints(mZeroPaddingChoices);
#endif
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

#ifndef SPECTRAL_SELECTION_GLOBAL_SWITCH
   S.Id(ID_SPECTRAL_SELECTION).TieCheckBox(_("Ena&ble Spectral Selection"),
      mTempSettings.spectralSelection);
#endif

//.........這裏部分代碼省略.........

void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("Enable Effects"));
   {

#if USE_AUDIO_UNITS
      S.TieCheckBox(_("Audio Unit"),
                    wxT("/AudioUnit/Enable"),
                    true);
#endif

      // JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
      S.TieCheckBox(wxT("&LADSPA"),
                    wxT("/Ladspa/Enable"),
                    true);
#endif

#if USE_LV2
      S.TieCheckBox(wxT("LV&2"),
                    wxT("/LV2/Enable"),
                    true);
#endif
#if USE_NYQUIST
      S.TieCheckBox(wxT("N&yquist"),
                    wxT("/Nyquist/Enable"),
                    true);
#endif

#if USE_VAMP
      S.TieCheckBox(wxT("&Vamp"),
                    wxT("/VAMP/Enable"),
                    true);
#endif

#if USE_VST
      S.TieCheckBox(wxT("V&ST"),
                    wxT("/VST/Enable"),
                    true);
#endif
   }
   S.EndStatic();

   S.StartStatic(_("Effect Options"));
   {
      S.StartMultiColumn(2);
      {
         wxArrayString visualgroups;
         wxArrayString prefsgroups;

         visualgroups.Add(_("Sorted by Effect Name"));
         visualgroups.Add(_("Sorted by Publisher and Effect Name"));
         visualgroups.Add(_("Sorted by Type and Effect Name"));
         visualgroups.Add(_("Grouped by Publisher"));
         visualgroups.Add(_("Grouped by Type"));

         prefsgroups.Add(wxT("sortby:name"));
         prefsgroups.Add(wxT("sortby:publisher:name"));
         prefsgroups.Add(wxT("sortby:type:name"));
         prefsgroups.Add(wxT("groupby:publisher"));
         prefsgroups.Add(wxT("groupby:type"));

         wxChoice *c = S.TieChoice(_("S&ort or Group:"),
                                   wxT("/Effects/GroupBy"),
                                   wxT("name"),
                                   visualgroups,
                                   prefsgroups);
         c->SetMinSize(c->GetBestSize());

         S.TieNumericTextBox(_("&Maximum effects per group (0 to disable):"),
                             wxT("/Effects/MaxPerGroup"),
#if defined(__WXGTK__)
                             15,
#else
                             0,
#endif
                             5);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

#ifndef EXPERIMENTAL_EFFECT_MANAGEMENT
   S.StartStatic(_("Plugin Options"));
   {
      S.TieCheckBox(_("Check for updated plugins when Audacity starts"),
                     wxT("/Plugins/CheckForUpdates"),
                     true);
      S.TieCheckBox(_("Rescan plugins next time Audacity is started"),
                     wxT("/Plugins/Rescan"),
                     false);
   }
   S.EndStatic();
#endif

#ifdef EXPERIMENTAL_EQ_SSE_THREADED
   S.StartStatic(_("Instruction Set"));
//.........這裏部分代碼省略.........

void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
   wxArrayString empty;

   S.SetBorder(2);

   S.StartStatic(_("Interface"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(HostID);
         /* i18n-hint: (noun) */
         mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
                             wxT("/MidiIO/Host"), 
                             wxT(""),
                             mHostNames,
                             mHostLabels);
         S.SetSizeHints(mHostNames);

         S.AddPrompt(_("Using: PortMidi"));
      }
      S.EndMultiColumn();
   }                              
   S.EndStatic();

   S.StartStatic(_("Playback"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(PlayID);
         mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
                             wxEmptyString,
                             &empty);
         int latency = gPrefs->Read(wxT("/MidiIO/OutputLatency"), 
                                    DEFAULT_SYNTH_LATENCY);
         mLatency = S.TieNumericTextBox(_("MIDI Synthesizer Latency (ms):"),
                                        wxT("/MidiIO/SynthLatency"),
                                        latency, 3);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
#ifdef EXPERIMENTAL_MIDI_IN
   S.StartStatic(_("Recording"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(RecordID);
         mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
                               wxEmptyString,
                               &empty);

         S.Id(ChannelsID);
         /*
         mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
                                 wxEmptyString,
                                 &empty);
         */
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
#endif
}

void QualityPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);

   S.StartStatic(_("Sampling"));
   {
      S.StartMultiColumn(2);
      {
         S.AddPrompt(_("Default Sample &Rate:"));

         S.StartMultiColumn(2);
         {
            // If the value in Prefs isn't in the list, then we want
            // the last item, 'Other...' to be shown.
            S.SetNoMatchSelector(mSampleRateNames.GetCount() - 1);
            // First the choice...
            // We make sure it uses the ID we want, so that we get changes
            S.Id(ID_SAMPLE_RATE_CHOICE);
            // We make sure we have a pointer to it, so that we can drive it.
            mSampleRates = S.TieChoice(wxT(""),
                                       wxT("/SamplingRate/DefaultProjectSampleRate"),
                                       AudioIO::GetOptimalSupportedSampleRate(),
                                       mSampleRateNames,
                                       mSampleRateLabels);
            S.SetSizeHints(mSampleRateNames);

            // Now do the edit box...
            mOtherSampleRate = S.TieNumericTextBox(wxT(""),
                                                   mOtherSampleRateValue,
                                                   15);
         }
         S.EndHorizontalLay();

         S.TieChoice(_("Default Sample &Format:"),
                     wxT("/SamplingRate/DefaultProjectSampleFormat"),
                     floatSample,
                     mSampleFormatNames,
                     mSampleFormatLabels);
         S.SetSizeHints(mSampleFormatNames);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Real-time Conversion"));
   {
      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(2);

         S.TieChoice(_("Sample Rate Con&verter:"),
                     Resample::GetFastMethodKey(),
                     Resample::GetFastMethodDefault(),
                     mConverterNames,
                     mConverterLabels),
         S.SetSizeHints(mConverterNames);

		 S.TieChoice(_("&Dither:"),
                     wxT("/Quality/DitherAlgorithm"),
                     Dither::none,
                     mDitherNames,
                     mDitherLabels);
         S.SetSizeHints(mDitherNames);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartStatic(_("High-quality Conversion"));
   {
      S.StartMultiColumn(2);
      {
         S.TieChoice(_("Sample Rate Conver&ter:"),
                     Resample::GetBestMethodKey(),
                     Resample::GetBestMethodDefault(),
                     mConverterNames,
                     mConverterLabels),
         S.SetSizeHints(mConverterNames);

		 S.TieChoice(_("Dit&her:"),
                     wxT("/Quality/HQDitherAlgorithm"),
                     Dither::shaped,
                     mDitherNames,
                     mDitherLabels);
         S.SetSizeHints(mDitherNames);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
}

void RecordingPrefs::PopulateOrExchange(ShuttleGui & S)
{
   wxTextCtrl *w;

   S.SetBorder(2);

   S.StartStatic(_("Playthrough"));
   {
      S.TieCheckBox(_("Overdub: &Play other tracks while recording new one"),
                    wxT("/AudioIO/Duplex"),
                    true);
#if defined(__WXMAC__)
      S.TieCheckBox(_("&Hardware Playthrough: Listen while recording or monitoring new track"),
                    wxT("/AudioIO/Playthrough"),
                    false);
#endif
      S.TieCheckBox(_("&Software Playthrough: Listen while recording or monitoring new track"),
                    wxT("/AudioIO/SWPlaythrough"),
                    false);
#if !defined(__WXMAC__)
      S.AddUnits(wxString(wxT("     ")) + _("(uncheck when recording \"stereo mix\")"));
#endif
   }
   S.EndStatic();

   S.StartStatic( _("Latency"));
   {
      S.StartThreeColumn();
      {
         // only show the following controls if we use Portaudio v19, because
         // for Portaudio v18 we always use default buffer sizes
         w = S.TieNumericTextBox(_("Audio to &buffer:"),
                                 wxT("/AudioIO/LatencyDuration"),
                                 DEFAULT_LATENCY_DURATION,
                                 9);
         S.AddUnits(_("milliseconds (higher = more latency)"));
         w->SetName(w->GetName() + wxT(" ") + _("milliseconds (higher = more latency)"));

         w = S.TieNumericTextBox(_("L&atency correction:"),
                                 wxT("/AudioIO/LatencyCorrection"),
                                 DEFAULT_LATENCY_CORRECTION,
                                 9);
         S.AddUnits(_("milliseconds (negative = backwards)"));
         w->SetName(w->GetName() + wxT(" ") + _("milliseconds (negative = backwards)"));
      }
      S.EndThreeColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Sound Activated Recording"));
   {
      S.TieCheckBox(_("Sound Activated &Recording"),
                    wxT("/AudioIO/SoundActivatedRecord"),
                    false);

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);

         int dBRange = gPrefs->Read(wxT("/GUI/EnvdBRange"), ENV_DB_RANGE);
         S.TieSlider(_("Sound Activation Le&vel (dB):"),
                     wxT("/AudioIO/SilenceLevel"),
                     -50,
                     0,
                     -dBRange);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   #ifdef AUTOMATED_INPUT_LEVEL_ADJUSTMENT
      S.StartStatic(_("AutomatedRecording Level Adjustment"));
      {
         S.TieCheckBox(_("Enable Automated Recordingt Level Adjustment."),
                       wxT("/AudioIO/AutomatedInputLevelAdjustment"),
                       false);

         S.StartMultiColumn(2, wxEXPAND);
         {
            S.SetStretchyCol(1);

            /* i18n-hint: Desired maximum (peak) volume for sound */
            S.TieSlider(_("Target Peak:"),
                        wxT("/AudioIO/TargetPeak"),
                        AILA_DEF_TARGET_PEAK,
                        100,
                        0);

            S.TieSlider(_("Within:"),
                     wxT("/AudioIO/DeltaPeakVolume"),
                     AILA_DEF_DELTA_PEAK,
                     100,
                     0);
         }
         S.EndMultiColumn();

         S.StartThreeColumn();
         {
            S.TieNumericTextBox(_("Analysis Time:"),
                                wxT("/AudioIO/AnalysisTime"),
//.........這裏部分代碼省略.........