C++ ShuttleGui::AddUnits方法代碼示例

void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.AddSpace(0, 5);

   S.StartHorizontalLay();
   {
      // Action choices
      wxArrayString processChoices;
      processChoices.Add(_("Truncate Detected Silence"));
      processChoices.Add(_("Compress Excess Silence"));

      S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
                                        mEffect->mProcessIndex,
                                        &processChoices);
      S.SetSizeHints(-1, -1);
   }
   S.EndHorizontalLay();


   S.StartStatic(_("Detect Silence"));
   {
      S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
      {
         // Threshold
         wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
         S.TieChoice(_("Level:"),
                     mEffect->mTruncDbChoiceIndex,
                     &choices);
         S.SetSizeHints(-1, -1);
         S.AddSpace(0); // 'choices' aleady includes units.

      // Ignored silence
         S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
                                                          mEffect->mInitialAllowedSilence,
                     12);
         S.AddUnits(wxT("seconds"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
   {
      // Truncation / Compression factor
      S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
                                                            mEffect->mTruncLongestAllowedSilence,
                                                            12);
      S.AddUnits(wxT("seconds"));

      S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
                                                   mEffect->mSilenceCompressPercent,
                                                   12);
      S.AddUnits(wxT("percent"));
   }
   S.EndMultiColumn();

   // Warnings
   pWarning = S.AddVariableText( wxT("") );
   UpdateUI();
}

void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Lynn Allan"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartThreeColumn();
   {
      wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());

      S.Id( ID_LONGEST_SILENCE_TEXT ).TieTextBox(_("Max silence duration:"),
                   mEffect->mTruncLongestAllowedSilentMs,
                   10);
      S.AddUnits( _("milliseconds") );
      //S.AddUnits(_("(9999999 or greater is off)"));
      S.TieChoice(_("Threshold for silence:"),
                  mEffect->mTruncDbChoiceIndex,
                  &choices);
   }
   S.EndTwoColumn();
   pWarning = S.AddVariableText( wxT("") );
}

void ChangeSpeedDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Speed, affecting both Tempo and Pitch") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) +
                 _("using SampleRate, by Erik de Castro Lopo"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      mpTextCtrl_PercentChange = 
         S.Id(ID_TEXT_PERCENTCHANGE).AddTextBox(_("Percent Change:"), wxT(""), 12);
      wxTextValidator validator(wxFILTER_NUMERIC);
      mpTextCtrl_PercentChange->SetValidator(validator);
   }
   S.EndMultiColumn();

   //
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mpSlider_PercentChange = 
         S.Id(ID_SLIDER_PERCENTCHANGE).AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
      mpSlider_PercentChange->SetName(_("Percent Change"));
   }
   S.EndHorizontalLay();

   // 
   S.StartMultiColumn(5, wxCENTER);
   {
      S.AddUnits(_("Standard Vinyl RPM:"));

      wxArrayString rpmStrings;
      rpmStrings.Add(wxT("33 1/3"));
      rpmStrings.Add(wxT("45"));
      rpmStrings.Add(wxT("78"));
      /* i18n-hint: n/a is an English abbreviation meaning "not applicable". */
      rpmStrings.Add(_("n/a"));

      mpChoice_FromVinyl = 
         S.Id(ID_CHOICE_FROMVINYL).AddChoice(_("from"), wxT(""), &rpmStrings);
      mpChoice_FromVinyl->SetName(_("From RPM"));
      mpChoice_FromVinyl->SetSizeHints(100, -1);

      mpChoice_ToVinyl = 
         S.Id(ID_CHOICE_TOVINYL).AddChoice(_("to"), wxT(""), &rpmStrings);
      mpChoice_ToVinyl->SetName(_("To RPM"));
      mpChoice_ToVinyl->SetSizeHints(100, -1);
   }
   S.EndMultiColumn();
}

void ChangeTempoDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
   wxTextValidator numvld(wxFILTER_NUMERIC);

   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Tempo without Changing Pitch") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) + 
                 _("using SoundTouch, by Olli Parviainen"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
         .AddTextBox(_("Percent Change:"), wxT(""), 12);
      m_pTextCtrl_PercentChange->SetValidator(numvld);
   }
   S.EndMultiColumn();

   //
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
         .AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
      m_pSlider_PercentChange->SetName(_("Percent Change"));
   }
   S.EndHorizontalLay();

   // 
   S.StartMultiColumn(5, wxCENTER);
   {
      //
      S.AddUnits(_("Beats per minute:"));

      m_pTextCtrl_FromBPM = S.Id(ID_TEXT_FROMBPM)
         .AddTextBox(_("from"), wxT(""), 12);
      m_pTextCtrl_FromBPM->SetName(_("From beats per minute"));
      m_pTextCtrl_FromBPM->SetValidator(numvld);

      m_pTextCtrl_ToBPM = S.Id(ID_TEXT_TOBPM)
         .AddTextBox(_("to"), wxT(""), 12);
      m_pTextCtrl_ToBPM->SetName(_("To beats per minute"));
      m_pTextCtrl_ToBPM->SetValidator(numvld);

      //
      S.AddUnits(_("Length (seconds):"));

      m_pTextCtrl_FromLength = S.Id(ID_TEXT_FROMLENGTH)
         .AddTextBox(_("from"), wxT(""), 12);
      m_pTextCtrl_FromLength->SetName(_("From length in seconds"));
      m_pTextCtrl_FromLength->SetValidator(nullvld);

      m_pTextCtrl_ToLength = S.Id(ID_TEXT_TOLENGTH)
         .AddTextBox(_("to"), wxT(""), 12);
      m_pTextCtrl_ToLength->SetName(_("To length in seconds"));
      m_pTextCtrl_ToLength->SetValidator(numvld);
   }
   S.EndMultiColumn();

   return;
}

void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
   bool bShow;
   gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );

   S.StartVerticalLay();
   {
      S.StartHorizontalLay(wxALIGN_LEFT, 0);
      {
         S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
      }
      S.EndHorizontalLay();

      if (mGrid == NULL) {
         mGrid = safenew Grid(S.GetParent(),
                          wxID_ANY,
                          wxDefaultPosition,
                          wxDefaultSize,
                          wxSUNKEN_BORDER);

         mGrid->RegisterDataType(wxT("Combo"),
            (mStringRenderer = safenew wxGridCellStringRenderer),
            (mComboEditor = safenew ComboEditor(wxArrayString(), true)));

         mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());

         auto  cs = names();

         // Build the initial (empty) grid
         mGrid->CreateGrid(0, 2);
         mGrid->SetRowLabelSize(0);
         mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
         mGrid->SetColLabelValue(0, _("Tag"));
         mGrid->SetColLabelValue(1, _("Value"));

         // Resize the name column and set default row height.
         wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
         mGrid->SetColSize(0, tc.GetSize().x);
         mGrid->SetColMinimalWidth(0, tc.GetSize().x);
      }
      S.Prop(1);
      S.AddWindow(mGrid, wxEXPAND | wxALL);

      S.StartMultiColumn(4, wxALIGN_CENTER);
      {
         S.Id(AddID).AddButton(_("&Add"));
         S.Id(RemoveID).AddButton(_("&Remove"));
         S.AddTitle( {} );
         S.Id(ClearID).AddButton(_("Cl&ear"));
      }
      S.EndMultiColumn();

      S.StartHorizontalLay(wxALIGN_CENTRE, 0);
      {
         S.StartStatic(_("Genres"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(EditID).AddButton(_("E&dit..."));
               S.Id(ResetID).AddButton(_("Rese&t..."));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
         S.StartStatic(_("Template"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(LoadID).AddButton(_("&Load..."));
               S.Id(SaveID).AddButton(_("&Save..."));
               S.AddTitle( {} );
               S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
      }
      S.EndHorizontalLay();
      S.StartHorizontalLay(wxALIGN_LEFT, 0);
      {
         S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}

void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
   S.StartVerticalLay();
   {
      S.StartHorizontalLay(wxALIGN_LEFT, false);
      {
         S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
      }
      S.EndHorizontalLay();

      if (mGrid == NULL) {
         mGrid = new Grid(S.GetParent(),
                          wxID_ANY,
                          wxDefaultPosition,
                          wxDefaultSize,
                          wxSUNKEN_BORDER);

         mStringRenderer = new wxGridCellStringRenderer;
         mComboEditor = new ComboEditor(wxArrayString(), true);

         mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);

         mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());

         wxArrayString cs(WXSIZEOF(names), names);

         // Build the initial (empty) grid
         mGrid->CreateGrid(0, 2); 
         mGrid->SetRowLabelSize(0);
         mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
         mGrid->SetColLabelValue(0, _("Tag"));
         mGrid->SetColLabelValue(1, _("Value"));

         // Resize the name column and set default row height.
         wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
         mGrid->SetColSize(0, tc.GetSize().x);
         mGrid->SetColMinimalWidth(0, tc.GetSize().x);
      }
      S.Prop(true);
      S.AddWindow(mGrid, wxEXPAND | wxALL);

      S.StartMultiColumn(4, wxALIGN_CENTER);
      {
         S.Id(AddID).AddButton(_("&Add"));
         S.Id(RemoveID).AddButton(_("&Remove"));
         S.AddTitle(wxT(" "));
         S.Id(ClearID).AddButton(_("Cl&ear"));
      }
      S.EndMultiColumn();

      S.StartHorizontalLay(wxALIGN_CENTRE, false);
      {
         S.StartStatic(_("Genres"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(EditID).AddButton(_("E&dit..."));
               S.Id(ResetID).AddButton(_("Rese&t..."));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
         S.StartStatic(_("Template"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(LoadID).AddButton(_("&Load..."));
               S.Id(SaveID).AddButton(_("&Save..."));
               S.AddTitle(wxT(" "));
               S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   S.AddStandardButtons(eOkButton | eCancelButton);
}

void EffectAutoDuck::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(5);
   S.StartVerticalLay(true);
   {
      S.AddSpace(0, 5);

      mPanel = safenew EffectAutoDuckPanel(S.GetParent(), this);
      S.AddWindow(mPanel);

      S.AddSpace(0, 5);

      S.StartMultiColumn(6, wxCENTER);
      {
         FloatingPointValidator<double> vldDuckAmountDb(1, &mDuckAmountDb, NUM_VAL_NO_TRAILING_ZEROES);
         vldDuckAmountDb.SetRange(MIN_DuckAmountDb, MAX_DuckAmountDb);
         mDuckAmountDbBox = S.AddTextBox(_("Duck amount:"), wxT(""), 10);
         mDuckAmountDbBox->SetValidator(vldDuckAmountDb);
         S.AddUnits(_("dB"));

         FloatingPointValidator<double> vldMaximumPause(2, &mMaximumPause, NUM_VAL_NO_TRAILING_ZEROES);
         vldMaximumPause.SetRange(MIN_MaximumPause, MAX_MaximumPause);
         mMaximumPauseBox = S.AddTextBox(_("Maximum pause:"), wxT(""), 10);
         mMaximumPauseBox->SetValidator(vldMaximumPause);
         S.AddUnits(_("seconds"));

         FloatingPointValidator<double> vldOuterFadeDownLen(2, &mOuterFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
         vldOuterFadeDownLen.SetRange(MIN_OuterFadeDownLen, MAX_OuterFadeDownLen);
         mOuterFadeDownLenBox = S.AddTextBox(_("Outer fade down length:"), wxT(""), 10);
         mOuterFadeDownLenBox->SetValidator(vldOuterFadeDownLen);
         S.AddUnits(_("seconds"));

         FloatingPointValidator<double> vldOuterFadeUpLen(2, &mOuterFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
         vldOuterFadeUpLen.SetRange(MIN_OuterFadeUpLen, MAX_OuterFadeUpLen);
         mOuterFadeUpLenBox = S.AddTextBox(_("Outer fade up length:"), wxT(""), 10);
         mOuterFadeUpLenBox->SetValidator(vldOuterFadeUpLen);
         S.AddUnits(_("seconds"));

         FloatingPointValidator<double> vldInnerFadeDownLen(2, &mInnerFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
         vldInnerFadeDownLen.SetRange(MIN_InnerFadeDownLen, MAX_InnerFadeDownLen);
         mInnerFadeDownLenBox = S.AddTextBox(_("Inner fade down length:"), wxT(""), 10);
         mInnerFadeDownLenBox->SetValidator(vldInnerFadeDownLen);
         S.AddUnits(_("seconds"));

         FloatingPointValidator<double> vldInnerFadeUpLen(2, &mInnerFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
         vldInnerFadeUpLen.SetRange(MIN_InnerFadeUpLen, MAX_InnerFadeUpLen);
         mInnerFadeUpLenBox = S.AddTextBox(_("Inner fade up length:"), wxT(""), 10);
         mInnerFadeUpLenBox->SetValidator(vldInnerFadeUpLen);
         S.AddUnits(_("seconds"));
      }
      S.EndMultiColumn();

      S.StartMultiColumn(3, wxCENTER);
      {
         FloatingPointValidator<double> vldThresholdDb(2, &mThresholdDb, NUM_VAL_NO_TRAILING_ZEROES);
         vldThresholdDb.SetRange(MIN_ThresholdDb, MAX_ThresholdDb);
         mThresholdDbBox = S.AddTextBox(_("Threshold:"), wxT(""), 10);
         mThresholdDbBox->SetValidator(vldThresholdDb);
         S.AddUnits(_("dB"));
      }
      S.EndMultiColumn();

   }
   S.EndVerticalLay();

   return;
}

void ChangePitchDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
   wxTextValidator numvld(wxFILTER_NUMERIC);
   wxArrayString pitch;

   pitch.Add(wxT("C"));
   pitch.Add(wxT("C#/Db"));
   pitch.Add(wxT("D"));
   pitch.Add(wxT("D#/Eb"));
   pitch.Add(wxT("E"));
   pitch.Add(wxT("F"));
   pitch.Add(wxT("F#/Gb"));
   pitch.Add(wxT("G"));
   pitch.Add(wxT("G#/Ab"));
   pitch.Add(wxT("A"));
   pitch.Add(wxT("A#/Bb"));
   pitch.Add(wxT("B"));

   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Pitch without Changing Tempo") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) +
                 _("using SoundTouch, by Olli Parviainen"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(6, wxCENTER);
   {
      //
      S.AddUnits(_("Pitch:"));

      S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
      {
         m_pChoice_FromPitch = S.Id(ID_CHOICE_FROMPITCH)
            .AddChoice(_("From:"), wxT(""), &pitch);
         m_pChoice_FromPitch->SetName(_("From Pitch"));
         m_pChoice_FromPitch->SetSizeHints(100, -1);
      }
      S.EndHorizontalLay();

      S.StartStatic(wxT(""));
      {
         S.StartVerticalLay();
         {
            S.SetBorder(3);
            m_pRadioButton_PitchUp = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
               .AddRadioButton(_("Up"));
         
            m_pRadioButton_PitchDown = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
               .AddRadioButtonToGroup(_("Down"));
            S.SetBorder(5);
         }
         S.EndVerticalLay();
      }
      S.EndStatic();

      S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
      {
         m_pChoice_ToPitch = S.Id(ID_CHOICE_TOPITCH)
            .AddChoice(_("To:"), wxT(""), &pitch);
         m_pChoice_ToPitch->SetName(_("To Pitch"));
         m_pChoice_ToPitch->SetSizeHints(100, -1);
      }
      S.EndHorizontalLay();
   }
   S.EndMultiColumn();

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      //
      S.AddPrompt(_("Semitones (half-steps):"));
      S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
      {
         m_pTextCtrl_SemitonesChange = S.Id(ID_TEXT_SEMITONESCHANGE)
            .AddTextBox(wxT(""), wxT(""), 12);
         m_pTextCtrl_SemitonesChange->SetName(_("Semitones in half-steps"));
         m_pTextCtrl_SemitonesChange->SetValidator(numvld);
      }
      S.EndHorizontalLay();

      //
      S.AddPrompt(_("Frequency (Hz):"));
      S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
      {
         m_pTextCtrl_FromFrequency = S.Id(ID_TEXT_FROMFREQUENCY)
            .AddTextBox(_("from"), wxT(""), 12);
         m_pTextCtrl_FromFrequency->SetName(_("From frequency in hertz"));
         m_pTextCtrl_FromFrequency->SetValidator(nullvld);

         m_pTextCtrl_ToFrequency = S.Id(ID_TEXT_TOFREQUENCY)
            .AddTextBox(_("to"), wxT(""), 12);
         m_pTextCtrl_ToFrequency->SetName(_("To frequency in seconds"));
         m_pTextCtrl_ToFrequency->SetValidator(numvld);
//.........這裏部分代碼省略.........

void EffectChangePitch::PopulateOrExchange(ShuttleGui & S)
{
   DeduceFrequencies(); // Set frequency-related control values based on sample.

   wxArrayString pitch;
   pitch.Add(wxT("C"));
   pitch.Add(wxT("C#/Db"));
   pitch.Add(wxT("D"));
   pitch.Add(wxT("D#/Eb"));
   pitch.Add(wxT("E"));
   pitch.Add(wxT("F"));
   pitch.Add(wxT("F#/Gb"));
   pitch.Add(wxT("G"));
   pitch.Add(wxT("G#/Ab"));
   pitch.Add(wxT("A"));
   pitch.Add(wxT("A#/Bb"));
   pitch.Add(wxT("B"));

   S.SetBorder(5);

   S.StartVerticalLay(0);
   {
      S.StartVerticalLay();
      {
         S.AddTitle(_("Change Pitch without Changing Tempo"));
         S.AddTitle(
            wxString::Format(_("Estimated Start Pitch: %s%d (%.3f Hz)"),
                              pitch[m_nFromPitch].c_str(), m_nFromOctave, m_FromFrequency));
      }
      S.EndVerticalLay();

      /* i18n-hint: (noun) Musical pitch.*/
      S.StartStatic(_("Pitch"));
      {
         S.StartMultiColumn(6, wxALIGN_CENTER); // 6 controls, because each AddChoice adds a wxStaticText and a wxChoice.
         {
            m_pChoice_FromPitch = S.Id(ID_FromPitch).AddChoice(_("from"), wxT(""), &pitch);
            m_pChoice_FromPitch->SetName(_("from"));
            m_pChoice_FromPitch->SetSizeHints(80, -1);

            m_pSpin_FromOctave = S.Id(ID_FromOctave).AddSpinCtrl(wxT(""), m_nFromOctave, INT_MAX, INT_MIN);
            m_pSpin_FromOctave->SetName(_("from Octave"));
            m_pSpin_FromOctave->SetSizeHints(50, -1);

            m_pChoice_ToPitch = S.Id(ID_ToPitch).AddChoice(_("to"), wxT(""), &pitch);
            m_pChoice_ToPitch->SetName(_("to"));
            m_pChoice_ToPitch->SetSizeHints(80, -1);

            m_pSpin_ToOctave =
               S.Id(ID_ToOctave).AddSpinCtrl(wxT(""), m_nToOctave, INT_MAX, INT_MIN);
            m_pSpin_ToOctave->SetName(_("to Octave"));
            m_pSpin_ToOctave->SetSizeHints(50, -1);
         }
         S.EndMultiColumn();

         S.StartHorizontalLay(wxALIGN_CENTER);
         {
            FloatingPointValidator<double> vldSemitones(2, &m_dSemitonesChange, NUM_VAL_TWO_TRAILING_ZEROES);
            m_pTextCtrl_SemitonesChange =
               S.Id(ID_SemitonesChange).AddTextBox(_("Semitones (half-steps):"), wxT(""), 12);
            m_pTextCtrl_SemitonesChange->SetName(_("Semitones (half-steps)"));
            m_pTextCtrl_SemitonesChange->SetValidator(vldSemitones);
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();

      S.StartStatic(_("Frequency"));
      {
         S.StartMultiColumn(5, wxALIGN_CENTER); // 5, because AddTextBox adds a wxStaticText and a wxTextCtrl.
         {
            FloatingPointValidator<double> vldFromFrequency(3, &m_FromFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
            vldFromFrequency.SetMin(0.0);
            m_pTextCtrl_FromFrequency = S.Id(ID_FromFrequency).AddTextBox(_("from"), wxT(""), 12);
            m_pTextCtrl_FromFrequency->SetName(_("from (Hz)"));
            m_pTextCtrl_FromFrequency->SetValidator(vldFromFrequency);

            FloatingPointValidator<double> vldToFrequency(3, &m_ToFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
            vldToFrequency.SetMin(0.0);
            m_pTextCtrl_ToFrequency = S.Id(ID_ToFrequency).AddTextBox(_("to"), wxT(""), 12);
            m_pTextCtrl_ToFrequency->SetName(_("to (Hz)"));
            m_pTextCtrl_ToFrequency->SetValidator(vldToFrequency);

            S.AddUnits(_("Hz"));
         }
         S.EndMultiColumn();

         S.StartHorizontalLay(wxALIGN_CENTER);
         {
            FloatingPointValidator<double> vldPercentage(3, &m_dPercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
            vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
            m_pTextCtrl_PercentChange = S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
            m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxEXPAND);
         {
            S.SetStyle(wxSL_HORIZONTAL);
            m_pSlider_PercentChange = S.Id(ID_PercentChange)
//.........這裏部分代碼省略.........

void EffectTruncSilence::PopulateOrExchange(ShuttleGui & S)
{
   wxASSERT(nActions == WXSIZEOF(kActionStrings));

   S.AddSpace(0, 5);

   S.StartStatic(_("Detect Silence"));
   {
      S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
      {
         // Threshold
         FloatingPointValidator<double> vldThreshold(3, &mThresholdDB,
            NumValidatorStyle::NO_TRAILING_ZEROES);
         vldThreshold.SetRange(MIN_Threshold, MAX_Threshold);
         mThresholdText = S.AddTextBox(_("Threshold:"), wxT(""), 0);
         mThresholdText->SetValidator(vldThreshold);
         S.AddUnits(_("dB"));

         // Ignored silence
         FloatingPointValidator<double> vldDur(3, &mInitialAllowedSilence, NumValidatorStyle::NO_TRAILING_ZEROES);
         vldDur.SetRange(MIN_Minimum, MAX_Minimum);
         mInitialAllowedSilenceT = S.AddTextBox(_("Duration:"), wxT(""), 12);
         mInitialAllowedSilenceT->SetValidator(vldDur);
         S.AddUnits(_("seconds"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Action"));
   {
      S.StartHorizontalLay();
      {
         // Action choices
         auto actionChoices = LocalizedStrings(kActionStrings, nActions);
         mActionChoice = S.AddChoice( {}, wxT(""), &actionChoices);
         mActionChoice->SetValidator(wxGenericValidator(&mActionIndex));
         S.SetSizeHints(-1, -1);
      }
      S.EndHorizontalLay();
      S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
      {
         // Truncation / Compression factor

         FloatingPointValidator<double> vldTrunc(3, &mTruncLongestAllowedSilence, NumValidatorStyle::NO_TRAILING_ZEROES);
         vldTrunc.SetRange(MIN_Truncate, MAX_Truncate);
         mTruncLongestAllowedSilenceT = S.AddTextBox(_("Truncate to:"), wxT(""), 12);
         mTruncLongestAllowedSilenceT->SetValidator(vldTrunc);
         S.AddUnits(_("seconds"));

         FloatingPointValidator<double> vldComp(3, &mSilenceCompressPercent, NumValidatorStyle::NO_TRAILING_ZEROES);
         vldComp.SetRange(MIN_Compress, MAX_Compress);
         mSilenceCompressPercentT = S.AddTextBox(_("Compress to:"), wxT(""), 12);
         mSilenceCompressPercentT->SetValidator(vldComp);
         S.AddUnits(_("%"));
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxALIGN_CENTER_HORIZONTAL);
      {
         mIndependent = S.AddCheckBox(_("Truncate tracks independently"),
            mbIndependent ? wxT("true") : wxT("false"));
      }
   S.EndMultiColumn();
}
   S.EndStatic();

   UpdateUI();
}

void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
   GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
   GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);

   S.SetBorder(5);

   S.StartVerticalLay(0);
   {
      S.AddSpace(0, 5);
      S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
      S.AddSpace(0, 10);

      // Speed multiplier and percent change controls.
      S.StartMultiColumn(4, wxCENTER);
      {
         FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
         vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
         mpTextCtrl_Multiplier =
            S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
         mpTextCtrl_Multiplier->SetValidator(vldMultiplier);

         FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
         vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
         mpTextCtrl_PercentChange =
            S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
         mpTextCtrl_PercentChange->SetValidator(vldPercentage);
      }
      S.EndMultiColumn();

      // Percent change slider.
      S.StartHorizontalLay(wxEXPAND);
      {
         S.SetStyle(wxSL_HORIZONTAL);
         mpSlider_PercentChange =
            S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
         mpSlider_PercentChange->SetName(_("Percent Change"));
      }
      S.EndHorizontalLay();

      // Vinyl rpm controls.
      S.StartMultiColumn(5, wxCENTER);
      {
         /* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
         S.AddUnits(_("Standard Vinyl rpm:"));

         wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));

         wxArrayString vinylChoices;
         for (int i = 0; i < kNumVinyl; i++)
         {
            if (i == kVinyl_NA)
            {
               vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
            }
            else
            {
               vinylChoices.Add(kVinylStrings[i]);
            }
         }

         mpChoice_FromVinyl =
            S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
         mpChoice_FromVinyl->SetName(_("From rpm"));
         mpChoice_FromVinyl->SetSizeHints(100, -1);

         mpChoice_ToVinyl =
            S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
         mpChoice_ToVinyl->SetName(_("To rpm"));
         mpChoice_ToVinyl->SetSizeHints(100, -1);
      }
      S.EndMultiColumn();

      // From/To time controls.
      S.StartStatic(_("Selection Length"), 0);
      {
         S.StartMultiColumn(2, wxALIGN_LEFT);
         {
            S.AddPrompt(_("Current Length:"));

            mpFromLengthCtrl = safenew
                  NumericTextCtrl(NumericConverter::TIME,
                                 S.GetParent(),
                                 wxID_ANY,
                                 mFormat,
                                 mFromLength,
                                 mProjectRate);

            mpFromLengthCtrl->SetName(_("from"));
            mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
            mpFromLengthCtrl->SetReadOnly(true);
            mpFromLengthCtrl->EnableMenu(false);
            S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);

            S.AddPrompt(_("New Length:"));

            mpToLengthCtrl = safenew
                  NumericTextCtrl(NumericConverter::TIME,
                                 S.GetParent(),
                                 ID_ToLength,
//.........這裏部分代碼省略.........

//.........這裏部分代碼省略.........
      // -------------------------------------------------------------------

      S.AddSpace(1, 1);

      mfreqRuler  = new RulerPanel(parent, wxID_ANY);
      mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
      mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
      mfreqRuler->ruler.SetLog(true);
      mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
      mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
      mfreqRuler->ruler.SetUnits(wxT(""));
      mfreqRuler->ruler.SetFlip(true);
      mfreqRuler->ruler.SetLabelEdges(true);
      int h;
      mfreqRuler->ruler.GetMaxSize(NULL, &h);
      mfreqRuler->SetMinSize(wxSize(-1, h));

      S.Prop(1);
      S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);

      S.AddSpace(1, 1);

      // -------------------------------------------------------------------
      // ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
      // -------------------------------------------------------------------

      S.AddSpace(1, 1);
      S.SetSizerProportion(0);
      S.StartMultiColumn(8, wxALIGN_CENTER);
      {
         wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));

         wxArrayString typeChoices;
         for (int i = 0; i < kNumTypes; i++)
         {
            typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
         }

         mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
         mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
         S.SetSizeHints(-1, -1);

         wxArrayString orders;
         for (int i = 1; i <= 10; i++)
         {
            orders.Add(wxString::Format(wxT("%d"), i));
         }
         /*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
         mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
         mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
         S.SetSizeHints(-1, -1);
         S.AddSpace(1, 1);

         FloatingPointValidator<float> vldRipple(1, &mRipple);
         vldRipple.SetRange(MIN_Passband, MAX_Passband);
         
         mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
         mRippleCtl->SetName(_("Passband Ripple (dB)"));
         mRippleCtl->SetValidator(vldRipple);
         mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);

         wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));

         wxArrayString subTypeChoices;
         for (int i = 0; i < kNumSubTypes; i++)
         {
            subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
         }

         mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
         mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
         S.SetSizeHints(-1, -1);
      
         FloatingPointValidator<float> vldCutoff(1, &mCutoff);
         vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
         
         mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
         mCutoffCtl->SetName(_("Cutoff (Hz)"));
         mCutoffCtl->SetValidator(vldCutoff);
         S.AddUnits(_("Hz"));

         FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
         vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
         
         mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
         mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
         mStopbandRippleCtl->SetValidator(vldStopbandRipple);
         mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
      }
      S.EndMultiColumn();
      S.AddSpace(1, 1);
   }
   S.EndMultiColumn();

   mFilterTypeCtl->SetFocus();

   return;
}

void AudioIOPrefs::PopulateOrExchange( ShuttleGui & S )
{
   /// \todo
   /// JKC: I think setting paths in gPrefs is bad practice.
   /// Suppose we are using gPrefs from elsewhere at the same time?
   /// Change these all to full paths?
   gPrefs->SetPath(wxT("/AudioIO"));

   S.SetBorder( 2 );

   S.StartHorizontalLay(wxEXPAND, 0 );
   S.StartStatic( _("Playback"),1 );
   {
      S.StartMultiColumn(2, wxEXPAND);
      S.SetStretchyCol(1);
      S.TieChoice( _("Device") + wxString(wxT(":")), wxT("PlaybackDevice"), 
         wxT(""), mmPlayNames, mmPlayLabels );

      S.AddPrompt( _("Using:") );
      wxString ver = _("Portaudio v");
#if USE_PORTAUDIO_V19
      ver += wxT("19");
#else
      ver += wxT("18");
#endif
      S.AddFixedText( ver );
      S.EndMultiColumn();
   }                              
   S.EndStatic();
   S.StartStatic( _("Recording"), 1 );
   {
      S.StartMultiColumn(2, wxEXPAND);
      S.SetStretchyCol(1);
      S.TieChoice( _("Device") + wxString(wxT(":")), wxT("RecordingDevice"), 
         wxT(""), mmRecordNames, mmRecordLabels );
      S.TieChoice( _("Channels") + wxString(wxT(":")), wxT("RecordChannels"), 
         2, mmChannelNames, mmChannelLabels );
      S.EndMultiColumn();
   }
   S.EndStatic();
   S.EndHorizontalLay();
   S.StartStatic( _("Playthrough") );
   {
      S.TieCheckBox( _("&Play other tracks while recording new one"),
         wxT("Duplex"),true);
#ifdef __MACOSX__
      S.TieCheckBox( _("&Hardware Playthrough (Play new track while recording it)"),
         wxT("Playthrough"),false);
#endif
      S.TieCheckBox( _("&Software Playthrough (Play new track while recording it)"),
         wxT("SWPlaythrough"),false);
   }
   S.EndStatic();
   S.StartHorizontalLay( wxEXPAND, 0 );
   S.StartStatic( _("Cut Preview"),1 );
   {
      S.StartThreeColumn();
      S.TieTextBox( _("Play before cut region:"), wxT("CutPreviewBeforeLen"),1.0,9);
      S.AddUnits(  _("seconds") );
      S.TieTextBox( _("Play after cut region:"),wxT("CutPreviewAfterLen"), 1.0,9);
      S.AddUnits(  _("seconds") );
      S.EndThreeColumn();
   }
   S.EndStatic();
   S.StartStatic( _("Latency"),1 );
   {
      S.StartThreeColumn();
#if USE_PORTAUDIO_V19
      // only show the following controls if we use Portaudio v19, because
      // for Portaudio v19 we always use default buffer sizes
      S.TieTextBox( _("Audio to buffer:"),wxT("LatencyDuration"),100.0,9);
      S.AddUnits(  _("milliseconds") );
#endif
      S.TieTextBox( _("Latency correction:"),wxT("LatencyCorrection"),0.0,9);
      S.AddUnits(  _("milliseconds") );
      S.EndThreeColumn();
   }
   S.EndStatic();
   S.EndHorizontalLay();
   S.StartHorizontalLay( wxEXPAND, 0 );
   S.StartStatic( _("Seek Time"),1 );
   {
      S.StartThreeColumn();
      S.TieTextBox( _("Short period:"), wxT("SeekShortPeriod"),1.0,9);
      S.AddUnits(  _("seconds") );
      S.TieTextBox( _("Long period:"),wxT("SeekLongPeriod"), 15.0,9);
      S.AddUnits(  _("seconds") );
      S.EndThreeColumn();
   }
   S.EndStatic();
   S.StartStatic( _("Effects Preview"),1 );
   {
      S.StartThreeColumn();
      S.TieTextBox( _("Play when previewing:"), wxT("EffectsPreviewLen"), 3.0,9);
      S.AddUnits( _("seconds") );
      S.EndThreeColumn();
   }

   gPrefs->SetPath(wxT("/"));
}

void RecordingPrefs::PopulateOrExchange(ShuttleGui & S)
{
   wxTextCtrl *w;

   S.SetBorder(2);

   S.StartStatic(_("Playthrough"));
   {
      S.TieCheckBox(_("Overdub: &Play other tracks while recording new one"),
                    wxT("/AudioIO/Duplex"),
                    true);
#if defined(__WXMAC__)
      S.TieCheckBox(_("&Hardware Playthrough: Listen while recording or monitoring new track"),
                    wxT("/AudioIO/Playthrough"),
                    false);
#endif
      S.TieCheckBox(_("&Software Playthrough: Listen while recording or monitoring new track"),
                    wxT("/AudioIO/SWPlaythrough"),
                    false);
#if !defined(__WXMAC__)
      S.AddUnits(wxString(wxT("     ")) + _("(uncheck when recording \"stereo mix\")"));
#endif
   }
   S.EndStatic();

   S.StartStatic( _("Latency"));
   {
      S.StartThreeColumn();
      {
         // only show the following controls if we use Portaudio v19, because
         // for Portaudio v18 we always use default buffer sizes
         w = S.TieNumericTextBox(_("Audio to &buffer:"),
                                 wxT("/AudioIO/LatencyDuration"),
                                 DEFAULT_LATENCY_DURATION,
                                 9);
         S.AddUnits(_("milliseconds (higher = more latency)"));
         w->SetName(w->GetName() + wxT(" ") + _("milliseconds (higher = more latency)"));

         w = S.TieNumericTextBox(_("L&atency correction:"),
                                 wxT("/AudioIO/LatencyCorrection"),
                                 DEFAULT_LATENCY_CORRECTION,
                                 9);
         S.AddUnits(_("milliseconds (negative = backwards)"));
         w->SetName(w->GetName() + wxT(" ") + _("milliseconds (negative = backwards)"));
      }
      S.EndThreeColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Sound Activated Recording"));
   {
      S.TieCheckBox(_("Sound Activated &Recording"),
                    wxT("/AudioIO/SoundActivatedRecord"),
                    false);

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);

         int dBRange = gPrefs->Read(wxT("/GUI/EnvdBRange"), ENV_DB_RANGE);
         S.TieSlider(_("Sound Activation Le&vel (dB):"),
                     wxT("/AudioIO/SilenceLevel"),
                     -50,
                     0,
                     -dBRange);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   #ifdef AUTOMATED_INPUT_LEVEL_ADJUSTMENT
      S.StartStatic(_("AutomatedRecording Level Adjustment"));
      {
         S.TieCheckBox(_("Enable Automated Recordingt Level Adjustment."),
                       wxT("/AudioIO/AutomatedInputLevelAdjustment"),
                       false);

         S.StartMultiColumn(2, wxEXPAND);
         {
            S.SetStretchyCol(1);

            /* i18n-hint: Desired maximum (peak) volume for sound */
            S.TieSlider(_("Target Peak:"),
                        wxT("/AudioIO/TargetPeak"),
                        AILA_DEF_TARGET_PEAK,
                        100,
                        0);

            S.TieSlider(_("Within:"),
                     wxT("/AudioIO/DeltaPeakVolume"),
                     AILA_DEF_DELTA_PEAK,
                     100,
                     0);
         }
         S.EndMultiColumn();

         S.StartThreeColumn();
         {
            S.TieNumericTextBox(_("Analysis Time:"),
                                wxT("/AudioIO/AnalysisTime"),
//.........這裏部分代碼省略.........

//.........這裏部分代碼省略.........
               {
                  S.Id(ID_Toggles + p);
                  mToggles[p] = S.AddCheckBox( {},
                                              value > 0.5);
                  mToggles[p]->SetName(labelText);
                  if (!tip.empty())
                  {
                     mToggles[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mToggles[p]->GetContainingSizer();
                  s->GetItem(mToggles[p])->SetFlag(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);

                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);

               }
               else if (mParameters[p].isQuantized &&
                        mParameters[p].quantizeStep == 1.0 &&
                        !mParameters[p].valueNames.empty())
               {
                  wxArrayStringEx choices;
                  int selected = -1;

                  for (size_t i = 0, cnt = mParameters[p].valueNames.size(); i < cnt; i++)
                  {
                     wxString choice = wxString::FromUTF8(mParameters[p].valueNames[i].c_str());
                     if (size_t(value - mParameters[p].minValue + 0.5) == i)
                     {
                        selected = i;
                     }
                     choices.push_back(choice);
                  }

                  S.Id(ID_Choices + p);
                  mChoices[p] = S.AddChoice( {}, choices, selected );
                  mChoices[p]->SetName(labelText);
                  mChoices[p]->SetSizeHints(-1, -1);
                  if (!tip.empty())
                  {
                     mChoices[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mChoices[p]->GetContainingSizer();
                  s->GetItem(mChoices[p])->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);

                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
               }
               else
               {
                  mValues[p] = value;
                  FloatingPointValidator<float> vld(6, &mValues[p]);
                  vld.SetRange(mParameters[p].minValue, mParameters[p].maxValue);

                  float range = mParameters[p].maxValue - mParameters[p].minValue;
                  auto style = range < 10 ? NumValidatorStyle::THREE_TRAILING_ZEROES :
                              range < 100 ? NumValidatorStyle::TWO_TRAILING_ZEROES :
                              NumValidatorStyle::ONE_TRAILING_ZERO;
                  vld.SetStyle(style);

                  S.Id(ID_Texts + p);
                  mFields[p] = S.AddTextBox( {}, wxT(""), 12);
                  mFields[p]->SetName(labelText);
                  mFields[p]->SetValidator(vld);
                  if (!tip.empty())
                  {
                     mFields[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mFields[p]->GetContainingSizer();
                  s->GetItem(mFields[p])->SetFlag(wxALIGN_CENTER_VERTICAL | wxALL);

                  wxString str = Internat::ToDisplayString(mParameters[p].minValue);
                  S.AddPrompt(str);

                  S.SetStyle(wxSL_HORIZONTAL);
                  S.Id(ID_Sliders + p);
                  mSliders[p] = S.AddSlider( {}, 0, 1000, 0);
                  mSliders[p]->SetName(labelText);
                  mSliders[p]->SetSizeHints(150, -1);
                  if (!tip.empty())
                  {
                     mSliders[p]->SetToolTip(tip);
                  }
                  
                  str = Internat::ToDisplayString(mParameters[p].maxValue);
                  S.AddUnits(str);
               }
            }
         }
         S.EndMultiColumn();
      }
      S.EndStatic();
   }
   S.EndScroller();

   scroller->SetScrollRate(0, 20);

   return;
}