Java CANTalon.configNominalOutputVoltage方法代码示例

import com.ctre.CANTalon; //导入方法依赖的package包/类
public Shooter() {
	super();
	shooterFeeder = new CANTalon(8);
    LiveWindow.addActuator("Shooter", "Feeder", shooterFeeder);
    shooterFeeder.enableBrakeMode(false);
    
    shooterShootMotor = new CANTalon(7);
    LiveWindow.addActuator("Shooter", "ShootMotor", shooterShootMotor);
    shooterShootMotor.enableBrakeMode(false);
       /* choose the sensor */
    shooterShootMotor.setFeedbackDevice(FeedbackDevice.QuadEncoder);
    shooterShootMotor.reverseSensor(true);
    shooterShootMotor.configEncoderCodesPerRev(PulsesPerRevolution); // if using FeedbackDevice.QuadEncoder

       /* set the peak and nominal outputs, 12V means full */
    shooterShootMotor.configNominalOutputVoltage(+0.0f, -0.0f);
    shooterShootMotor.configPeakOutputVoltage(+12.0f, -12.0f);
       
       /* set closed loop gains in slot0 */
    shooterShootMotor.setProfile(0);
    shooterShootMotor.setF(pidF);
       shooterShootMotor.setP(pidP);	
       
       //only change I and D to smooth out control
       shooterShootMotor.setI(0); 
       shooterShootMotor.setD(0);
    
    shooterAgitator = new CANTalon(10);
    LiveWindow.addActuator("Shooter", "Agitator", shooterAgitator);
    shooterAgitator.enableBrakeMode(false);
}
 

import com.ctre.CANTalon; //导入方法依赖的package包/类
private void configureMaster(CANTalon talon) {
  logger.info("init master: " + talon.getDeviceID());
  talon.changeControlMode(CANTalon.TalonControlMode.Voltage);
  talon.setFeedbackDevice(CANTalon.FeedbackDevice.QuadEncoder);
  talon.configEncoderCodesPerRev(RobotMap.QUAD_ENCODER_TICKS_PER_REV);
  talon.configNominalOutputVoltage(+0.0f, -0.0f);
  talon.configPeakOutputVoltage(+12.0f, -12.0f);
  talon.setProfile(0);
  talon.setF(0);
  talon.setP(0.5);
  talon.setI(0.0001);
  talon.setD(1.0);
  talon.setPosition(0);
  talon.enableBrakeMode(true);
}
 

import com.ctre.CANTalon; //导入方法依赖的package包/类
public Drivebase() {
    super();

    left = new CANTalon(FRONT_LEFT_MOTOR_DEVICE_NUMBER);
    leftSlave = new CANTalon(BACK_LEFT_MOTOR_DEVICE_NUMBER);
    leftSlave.changeControlMode(CANTalon.TalonControlMode.Follower);
    leftSlave.set(FRONT_LEFT_MOTOR_DEVICE_NUMBER);

    right = new CANTalon(FRONT_RIGHT_MOTOR_DEVICE_NUMBER);
    rightSlave =  new CANTalon(BACK_RIGHT_MOTOR_DEVICE_NUMBER);
    rightSlave.changeControlMode(CANTalon.TalonControlMode.Follower);
    rightSlave.set(FRONT_RIGHT_MOTOR_DEVICE_NUMBER);

    left.setInverted(true);
    right.setInverted(true);
    leftSlave.setInverted(true);
    rightSlave.setInverted(true);

    left.setFeedbackDevice(CANTalon.FeedbackDevice.QuadEncoder);
    right.setFeedbackDevice(CANTalon.FeedbackDevice.QuadEncoder);
    left.configEncoderCodesPerRev(TICS_PER_REVOLUTION);
    right.configEncoderCodesPerRev(TICS_PER_REVOLUTION);
    left.reverseSensor(true);
    right.reverseSensor(true);

    // PID Stuff
    left.setPID(0.1, 0, 0, 0.025, 0, 1, 0);
    right.setPID(0.1, 0, 0, 0.025, 0, 1, 0);

    left.configNominalOutputVoltage(+0, -0);
    right.configPeakOutputVoltage(+12, -12);
    left.setProfile(0);
    right.setProfile(0);

    robotDrive = new RobotDrive(left, right);
}
 

import com.ctre.CANTalon; //导入方法依赖的package包/类
/**
 * Create the instance of Shooter.
 */
public Shooter() {
  logger.info("Initialize");

  if (RobotMap.IS_ROADKILL) {
    return;
  }
  // account for missing Talons
  if (Robot.deviceFinder.isTalonAvailable(RobotMap.CT_ID_SHOOTER_MASTER)) {
    masterId = RobotMap.CT_ID_SHOOTER_MASTER;
    slaveId = RobotMap.CT_ID_SHOOTER_SLAVE;
  } else {
    logger.warn("Master talon is missing");
    masterId = RobotMap.CT_ID_SHOOTER_SLAVE;
    // in case it comes back
    slaveId = RobotMap.CT_ID_SHOOTER_MASTER;
  }
  
  shooterMaster = new CANTalon(masterId);
  // basic setup
  shooterMaster.changeControlMode(CANTalon.TalonControlMode.Speed);
  shooterMaster.enableBrakeMode(false); // probably bad for 775pros
  shooterMaster.setFeedbackDevice(CANTalon.FeedbackDevice.CtreMagEncoder_Relative);
  shooterMaster.reverseSensor(false);
  // the Talon needs peak and nominal output values
  shooterMaster.configNominalOutputVoltage(+0.0f, -0.0f);
  shooterMaster.configPeakOutputVoltage(+12.0f, -12.0f);
  // configure PID
  shooterMaster.setProfile(0);
  shooterMaster.setF(0);
  shooterMaster.setP(0.12);
  shooterMaster.setI(0.00012);
  shooterMaster.setD(0.5);
  // add to LiveWindow for easy testing
  LiveWindow.addActuator("Shooter", "Master", shooterMaster);

  shooterSlave = new CANTalon(slaveId);
  shooterSlave.changeControlMode(CANTalon.TalonControlMode.Follower);
  shooterSlave.enableBrakeMode(false);
  shooterSlave.set(masterId);
  LiveWindow.addActuator("Shooter", "Slave", shooterSlave);

  Thread shooterWatchdog = new Thread(this::shooterWatchdogThread);
  // allow JVM to exit
  shooterWatchdog.setDaemon(true);
  // in the debugger, we'd like to know what this is
  shooterWatchdog.setName("Shooter Watchdog Thread");
  shooterWatchdog.start();
  
  SmartDashboard.putData(new InstantCommand("ForceOverrideShooterFault") {
    @Override
    public void execute() {
      shooterFault = false;
    }
  });
}
 

import com.ctre.CANTalon; //导入方法依赖的package包/类
@Override
protected void config(CANTalon talon, double foward, double reverse) {
  talon.configNominalOutputVoltage(foward, reverse);
}
 

import com.ctre.CANTalon; //导入方法依赖的package包/类
@Override
public void configure(@NotNull CANTalon talon) {
  talon.configMaxOutputVoltage(valueOrElse(outputVoltageMax, 12));

  talon.setCloseLoopRampRate(closedLoopRampRate != null ? closedLoopRampRate : 0);

  talon.configPeakOutputVoltage(
      valueOrElse(forwardOutputVoltagePeak, 12), valueOrElse(reverseOutputVoltagePeak, -12));

  talon.configNominalOutputVoltage(
      valueOrElse(forwardOutputVoltageNominal, 0), valueOrElse(reverseOutputVoltageNominal, 0));

  talon.setAllowableClosedLoopErr(valueOrElse(allowableClosedLoopError, 0));

  talon.setNominalClosedLoopVoltage(valueOrElse(nominalClosedLoopVoltage, 0));

  talon.setPID(valueOrElse(pGain, 0), valueOrElse(iGain, 0), valueOrElse(dGain, 0));
  talon.setF(valueOrElse(fGain, 0));

  talon.setIZone(valueOrElse(iZone, 0));
  super.configure(talon);
}