C++ ZONE_SETTINGS::SetIsKeepout方法代码示例

bool DIALOG_KEEPOUT_AREA_PROPERTIES::TransferDataFromWindow()
{
    // Init keepout parameters:
    m_zonesettings.SetIsKeepout( true );
    m_zonesettings.SetDoNotAllowTracks( m_cbTracksCtrl->GetValue() );
    m_zonesettings.SetDoNotAllowVias( m_cbViasCtrl->GetValue() );
    m_zonesettings.SetDoNotAllowCopperPour( m_cbCopperPourCtrl->GetValue() );

    // Test for not allowed items: should have at least one item not allowed:
    if( ! m_zonesettings.GetDoNotAllowTracks() &&
        ! m_zonesettings.GetDoNotAllowVias() &&
        ! m_zonesettings.GetDoNotAllowCopperPour() )
    {
        DisplayError( NULL, _("Tracks, vias, and pads are allowed. The keepout will have no effect." ) );
        return false;
    }

    if( m_zonesettings.m_Layers.count() == 0 )
    {
        DisplayError( NULL, _( "No layers selected." ) );
        return false;
    }

    switch( m_OutlineAppearanceCtrl->GetSelection() )
    {
    case 0: m_zonesettings.m_Zone_HatchingStyle = ZONE_CONTAINER::NO_HATCH;      break;
    case 1: m_zonesettings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_EDGE; break;
    case 2: m_zonesettings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_FULL; break;
    }

    if( m_config )
        m_config->Write( ZONE_NET_OUTLINES_STYLE_KEY, (long) m_zonesettings.m_Zone_HatchingStyle );

    m_zonesettings.m_Zone_45_Only = m_cbConstrainCtrl->GetValue();
    m_zonesettings.m_ZonePriority = 0;  // for a keepout, this param is not used.

    *m_ptr = m_zonesettings;
    return true;
}

int PCB_EDIT_FRAME::Begin_Zone( wxDC* DC )
{
    ZONE_SETTINGS zoneInfo = GetZoneSettings();

    // verify if s_CurrentZone exists (could be deleted since last selection) :
    int ii;
    for( ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
    {
        if( s_CurrentZone == GetBoard()->GetArea( ii ) )
            break;
    }

    if( ii >= GetBoard()->GetAreaCount() ) // Not found: could be deleted since last selection
    {
        s_AddCutoutToCurrentZone = false;
        s_CurrentZone = NULL;
    }

    // If no zone contour in progress, a new zone is being created:
    if( !GetBoard()->m_CurrentZoneContour )
    {
        if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT &&
            getActiveLayer() >= FIRST_NON_COPPER_LAYER )
        {
            DisplayError( this,
                          _( "Error: a keepout area is allowed only on copper layers" ) );
            return 0;
        }
        else
            GetBoard()->m_CurrentZoneContour = new ZONE_CONTAINER( GetBoard() );
    }

    ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;

    if( zone->GetNumCorners() == 0 )    // Start a new contour: init zone params (net, layer ...)
    {
        if( !s_CurrentZone )            // A new outline is created, from scratch
        {
            ZONE_EDIT_T edited;

            // Init zone params to reasonable values
            zone->SetLayer( getActiveLayer() );

            // Prompt user for parameters:
            m_canvas->SetIgnoreMouseEvents( true );

            if( zone->IsOnCopperLayer() )
            {
                // Put a zone on a copper layer
                if( GetBoard()->GetHighLightNetCode() > 0 )
                {
                    zoneInfo.m_NetcodeSelection = GetBoard()->GetHighLightNetCode();

                    zone->SetNet( zoneInfo.m_NetcodeSelection );
                    zone->SetNetNameFromNetCode( );
                }
                double tmp = ZONE_THERMAL_RELIEF_GAP_MIL;
                wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_GAP_STRING_KEY, &tmp );
                zoneInfo.m_ThermalReliefGap = KiROUND( tmp * IU_PER_MILS);

                tmp = ZONE_THERMAL_RELIEF_COPPER_WIDTH_MIL;
                wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY,
                                                &tmp );
                zoneInfo.m_ThermalReliefCopperBridge = KiROUND( tmp * IU_PER_MILS );

                tmp = ZONE_CLEARANCE_MIL;
                wxGetApp().GetSettings()->Read( ZONE_CLEARANCE_WIDTH_STRING_KEY,
                                                &tmp );
                zoneInfo.m_ZoneClearance = KiROUND( tmp * IU_PER_MILS );

                tmp = ZONE_THICKNESS_MIL;
                wxGetApp().GetSettings()->Read( ZONE_MIN_THICKNESS_WIDTH_STRING_KEY,
                                                &tmp );
                zoneInfo.m_ZoneMinThickness = KiROUND( tmp * IU_PER_MILS );

                zoneInfo.m_CurrentZone_Layer = zone->GetLayer();

                if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT )
                {
                    zoneInfo.SetIsKeepout( true );
                    edited = InvokeKeepoutAreaEditor( this, &zoneInfo );
                }
                else
                {
                    zoneInfo.SetIsKeepout( false );
                    edited = InvokeCopperZonesEditor( this, &zoneInfo );
                }
            }
            else   // Put a zone on a non copper layer (technical layer)
            {
                zoneInfo.SetIsKeepout( false );
                zoneInfo.m_NetcodeSelection = 0;     // No net for non copper zones
                edited = InvokeNonCopperZonesEditor( this, zone, &zoneInfo );
            }

            m_canvas->MoveCursorToCrossHair();
            m_canvas->SetIgnoreMouseEvents( false );

            if( edited == ZONE_ABORT )
                return 0;
//.........这里部分代码省略.........

//.........这里部分代码省略.........
                    m_board->GetRatsnest()->Update( zone );

                    m_frame->OnModify();
                    m_frame->SaveCopyInUndoList( zone, UR_NEW );

                    zone = NULL;
                }
                else
                {
                    delete zone;
                    zone = NULL;
                }

                numPoints = 0;
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );

                if( direction45 )
                {
                    preview.Remove( &line45 );
                    direction45 = false;
                }

                preview.FreeItems();
                updatePreview = true;
            }
            else
            {
                if( numPoints == 0 )        // it's the first click
                {
                    // Get the current default settings for zones
                    ZONE_SETTINGS zoneInfo = m_frame->GetZoneSettings();
                    zoneInfo.m_CurrentZone_Layer = m_frame->GetScreen()->m_Active_Layer;
                    zoneInfo.SetIsKeepout( aKeepout );

                    m_controls->SetAutoPan( true );
                    m_controls->CaptureCursor( true );

                    // Show options dialog
                    ZONE_EDIT_T dialogResult;

                    if( aKeepout )
                        dialogResult = InvokeKeepoutAreaEditor( m_frame, &zoneInfo );
                    else
                    {
                        if( IsCopperLayer( zoneInfo.m_CurrentZone_Layer ) )
                            dialogResult = InvokeCopperZonesEditor( m_frame, &zoneInfo );
                        else
                            dialogResult = InvokeNonCopperZonesEditor( m_frame, NULL, &zoneInfo );
                    }

                    if( dialogResult == ZONE_ABORT )
                    {
                        m_controls->SetAutoPan( false );
                        m_controls->CaptureCursor( false );
                        continue;
                    }

                    // Apply the selected settings
                    zone = new ZONE_CONTAINER( m_board );
                    zoneInfo.ExportSetting( *zone );
                    m_frame->GetGalCanvas()->SetTopLayer( zoneInfo.m_CurrentZone_Layer );

                    // Add the first point
                    zone->Outline()->Start( zoneInfo.m_CurrentZone_Layer,
                                            cursorPos.x, cursorPos.y,