C++ ZONE_SETTINGS::GetCornerSmoothingType方法代码示例

bool DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataToWindow()
{
    m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );
    m_cornerRadius.SetValue( m_settings.GetCornerRadius() );

    m_minWidth.SetValue( m_settings.m_ZoneMinThickness );
    m_ConstrainOpt->SetValue( m_settings.m_Zone_45_Only );

    switch( m_settings.m_Zone_HatchingStyle )
    {
    case ZONE_CONTAINER::NO_HATCH:      m_OutlineAppearanceCtrl->SetSelection( 0 ); break;
    case ZONE_CONTAINER::DIAGONAL_EDGE: m_OutlineAppearanceCtrl->SetSelection( 1 ); break;
    case ZONE_CONTAINER::DIAGONAL_FULL: m_OutlineAppearanceCtrl->SetSelection( 2 ); break;
    }

    SetInitialFocus( m_OutlineAppearanceCtrl );

    switch( m_settings.m_FillMode )
    {
    case ZFM_HATCH_PATTERN:
        m_GridStyleCtrl->SetSelection( 1 ); break;
    default:
        m_GridStyleCtrl->SetSelection( 0 ); break;
    }

    m_gridStyleRotation.SetUnits( DEGREES );
    m_gridStyleRotation.SetValue( m_settings.m_HatchFillTypeOrientation*10 ); // IU is decidegree

    // Gives a reasonable value to grid style parameters, if currently there are no defined
    // parameters for grid pattern thickness and gap (if the value is 0)
    // the grid pattern thickness default value is (arbitrary) m_ZoneMinThickness * 4
    // or 1mm
    // the grid pattern gap default value is (arbitrary) m_ZoneMinThickness * 6
    // or 1.5 mm
    int bestvalue = m_settings.m_HatchFillTypeThickness;

    if( bestvalue <= 0 )     // No defined value for m_HatchFillTypeThickness
        bestvalue = std::max( m_settings.m_ZoneMinThickness * 4, Millimeter2iu( 1.0 ) );

    m_gridStyleThickness.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );

    bestvalue = m_settings.m_HatchFillTypeGap;

    if( bestvalue <= 0 )     // No defined value for m_HatchFillTypeGap
        bestvalue = std::max( m_settings.m_ZoneMinThickness * 6, Millimeter2iu( 1.5 ) );

    m_gridStyleGap.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );

    m_spinCtrlSmoothLevel->SetValue( m_settings.m_HatchFillTypeSmoothingLevel );
    m_spinCtrlSmoothValue->SetValue( m_settings.m_HatchFillTypeSmoothingValue );

    // Enable/Disable some widgets
    wxCommandEvent event;
    OnStyleSelection( event );

    return true;
}

void DIALOG_COPPER_ZONE::initDialog()
{
    BOARD* board = m_Parent->GetBoard();

    wxString msg;

    if( m_settings.m_Zone_45_Only )
        m_OrientEdgesOpt->SetSelection( 1 );

    m_FillModeCtrl->SetSelection( m_settings.m_FillMode ? 1 : 0 );

    AddUnitSymbol( *m_ClearanceValueTitle, g_UserUnit );
    msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneClearance );
    m_ZoneClearanceCtrl->SetValue( msg );

    AddUnitSymbol( *m_MinThicknessValueTitle, g_UserUnit );
    msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneMinThickness );
    m_ZoneMinThicknessCtrl->SetValue( msg );

    switch( m_settings.GetPadConnection() )
    {
    case THT_THERMAL:               // Thermals only for THT pads
        m_PadInZoneOpt->SetSelection( 2 );
        break;

    case PAD_NOT_IN_ZONE:           // Pads are not covered
        m_PadInZoneOpt->SetSelection( 3 );
        break;

    default:
    case THERMAL_PAD:               // Use thermal relief for pads
        m_PadInZoneOpt->SetSelection( 1 );
        break;

    case PAD_IN_ZONE:               // pads are covered by copper
        m_PadInZoneOpt->SetSelection( 0 );
        break;
    }

    // Antipad and spokes are significant only for thermals
    if( m_settings.GetPadConnection() != THERMAL_PAD &&
        m_settings.GetPadConnection() != THT_THERMAL )
    {
        m_AntipadSizeValue->Enable( false );
        m_CopperWidthValue->Enable( false );
    }
    else
    {
        m_AntipadSizeValue->Enable( true );
        m_CopperWidthValue->Enable( true );
    }

    m_PriorityLevelCtrl->SetValue( m_settings.m_ZonePriority );

    AddUnitSymbol( *m_AntipadSizeText, g_UserUnit );
    AddUnitSymbol( *m_CopperBridgeWidthText, g_UserUnit );
    PutValueInLocalUnits( *m_AntipadSizeValue, m_settings.m_ThermalReliefGap );
    PutValueInLocalUnits( *m_CopperWidthValue, m_settings.m_ThermalReliefCopperBridge );

    m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );

    PutValueInLocalUnits( *m_cornerSmoothingCtrl, m_settings.GetCornerRadius() );

    switch( m_settings.m_Zone_HatchingStyle )
    {
    case CPolyLine::NO_HATCH:
        m_OutlineAppearanceCtrl->SetSelection( 0 );
        break;

    case CPolyLine::DIAGONAL_EDGE:
        m_OutlineAppearanceCtrl->SetSelection( 1 );
        break;

    case CPolyLine::DIAGONAL_FULL:
        m_OutlineAppearanceCtrl->SetSelection( 2 );
        break;
    }

    m_ArcApproximationOpt->SetSelection(
        m_settings.m_ArcToSegmentsCount == ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF ? 1 : 0 );

    // Create one column in m_LayerSelectionCtrl
    wxListItem column0;
    column0.SetId( 0 );
    m_LayerSelectionCtrl->InsertColumn( 0, column0 );
    // Build copper layer list and append to layer widget
    int layerCount = board->GetCopperLayerCount();
    wxImageList* imageList = new wxImageList( LAYER_BITMAP_SIZE_X, LAYER_BITMAP_SIZE_Y );
    m_LayerSelectionCtrl->AssignImageList( imageList, wxIMAGE_LIST_SMALL );
    int ctrlWidth = 0;  // Min width for m_LayerSelectionCtrl to show the layers names
    for( LAYER_NUM ii = FIRST_LAYER; ii < layerCount; ++ii )
    {
        LAYER_NUM layerNumber = LAYER_N_BACK;

        if( layerCount <= 1 || ii < layerCount - 1 )
            layerNumber = ii;
        else if( ii == layerCount - 1 )
            layerNumber = LAYER_N_FRONT;

        m_LayerId.insert( m_LayerId.begin(), layerNumber );
//.........这里部分代码省略.........

bool DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataFromWindow()
{
    m_settings.SetCornerSmoothingType( m_cornerSmoothingChoice->GetSelection() );

    m_settings.SetCornerRadius( m_settings.GetCornerSmoothingType() == ZONE_SETTINGS::SMOOTHING_NONE
                                ? 0 : m_cornerRadius.GetValue() );

    if( !m_gridStyleRotation.Validate( -1800, 1800 ) )
        return false;

    m_settings.m_ZoneMinThickness = m_minWidth.GetValue();

    switch( m_OutlineAppearanceCtrl->GetSelection() )
    {
    case 0: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::NO_HATCH;      break;
    case 1: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_EDGE; break;
    case 2: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_FULL; break;
    }

    if( m_GridStyleCtrl->GetSelection() > 0 )
        m_settings.m_FillMode = ZFM_HATCH_PATTERN;
    else
        m_settings.m_FillMode = ZFM_POLYGONS;


    if( m_settings.m_FillMode == ZFM_HATCH_PATTERN )
    {
        int minThickness = m_minWidth.GetValue();

        if( !m_gridStyleThickness.Validate( minThickness, INT_MAX ) )
            return false;

        if( !m_gridStyleGap.Validate( minThickness, INT_MAX ) )
            return false;
    }


    m_settings.m_HatchFillTypeOrientation = m_gridStyleRotation.GetValue()/10.0; // value is returned in deci-degree
    m_settings.m_HatchFillTypeThickness = m_gridStyleThickness.GetValue();
    m_settings.m_HatchFillTypeGap = m_gridStyleGap.GetValue();
    m_settings.m_HatchFillTypeSmoothingLevel = m_spinCtrlSmoothLevel->GetValue();
    m_settings.m_HatchFillTypeSmoothingValue = m_spinCtrlSmoothValue->GetValue();

    wxConfigBase* cfg = Kiface().KifaceSettings();
    wxASSERT( cfg );

    cfg->Write( ZONE_NET_OUTLINES_STYLE_KEY, (long) m_settings.m_Zone_HatchingStyle );

    m_settings.m_Zone_45_Only = m_ConstrainOpt->GetValue();

    // Get the layer selection for this zone
    int layer = -1;
    for( int ii = 0; ii < m_layers->GetItemCount(); ++ii )
    {
        if( m_layers->GetToggleValue( (unsigned) ii, 0 ) )
        {
            layer = ii;
            break;
        }
    }

    if( layer < 0 )
    {
        DisplayError( this, _( "No layer selected." ) );
        return false;
    }

    *m_ptr = m_settings;
    return true;
}