C++ TVector3::Py方法代码示例

本文整理汇总了C++中TVector3::Py方法的典型用法代码示例。如果您正苦于以下问题：C++ TVector3::Py方法的具体用法？C++ TVector3::Py怎么用？C++ TVector3::Py使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类TVector3的用法示例。

在下文中一共展示了TVector3::Py方法的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: pos

/*
 * Make SvtxTrack from PHGenFit::Track and SvtxTrack
 */
SvtxTrack* PHG4TrackKalmanFitter::MakeSvtxTrack(const SvtxTrack* svtx_track,
		const PHGenFit::Track* phgf_track) {

	double chi2 = phgf_track->get_chi2();
	double ndf = phgf_track->get_ndf();

	genfit::MeasuredStateOnPlane* gf_state = phgf_track->extrapolateToLine(TVector3(0.,0.,0.), TVector3(0.,0.,1.));
	TVector3 mom = gf_state->getMom();
	TVector3 pos = gf_state->getPos();
	TMatrixDSym cov = gf_state->get6DCov();


	//const SvtxTrack_v1* temp_track = static_cast<const SvtxTrack_v1*> (svtx_track);
	SvtxTrack_v1* out_track = new SvtxTrack_v1(*static_cast<const SvtxTrack_v1*> (svtx_track));

	/*!
	 *  1/p, u'/z', v'/z', u, v
	 *  u is defined as mom X beam line at POCA
	 *  so u is the dca2d direction
	 */
	double dca2d = gf_state->getState()[3];
	out_track->set_dca2d(dca2d);
	if(gf_state->getCov()[3][3] > 0)
		out_track->set_dca2d_error(sqrt(gf_state->getCov()[3][3]));
	else {
		out_track->set_dca2d_error(-9999);
		if(verbosity >= 1)
			LogWarning("gf_state->getCov()[3][3] <= 0");
	}
	double dca3d = sqrt(
			dca2d*dca2d +
			gf_state->getState()[4]*gf_state->getState()[4]);
	out_track->set_dca(dca3d);


	out_track->set_chisq(chi2);
	out_track->set_ndf(ndf);
	out_track->set_charge((_reverse_mag_field) ? -1.*phgf_track->get_charge() : phgf_track->get_charge());

	out_track->set_px(mom.Px());
	out_track->set_py(mom.Py());
	out_track->set_pz(mom.Pz());

	out_track->set_x(pos.X());
	out_track->set_y(pos.Y());
	out_track->set_z(pos.Z());

	for(int i=0;i<6;i++)
	{
		for(int j=i;j<6;j++)
		{
			out_track->set_error(i,j,cov[i][j]);
		}
	}

	for (SvtxTrack::ConstClusterIter iter = svtx_track->begin_clusters();
			iter != svtx_track->end_clusters(); ++iter) {
		unsigned int cluster_id = *iter;
		SvtxCluster* cluster = _clustermap->get(cluster_id);
		if(!cluster)
		{
			LogError("No cluster Found!");
			continue;
		}
		//cluster->identify(); //DEBUG

		//unsigned int l = cluster->get_layer();

		TVector3 pos(cluster->get_x(), cluster->get_y(), cluster->get_z());

		double radius = pos.Pt();

		//TODO add exception handling
		genfit::MeasuredStateOnPlane* gf_state = phgf_track->extrapolateToCylinder(radius,TVector3(0,0,0),TVector3(0,0,1), 0);

		if (!gf_state) {
			if (verbosity > 1)
				LogWarning("Exrapolation failed!");
			continue;
		}

		SvtxTrackState* state = new SvtxTrackState_v1(radius);
		state->set_x(gf_state->getPos().x());
		state->set_y(gf_state->getPos().y());
		state->set_z(gf_state->getPos().z());

		state->set_px(gf_state->getMom().x());
		state->set_py(gf_state->getMom().y());
		state->set_pz(gf_state->getMom().z());

		//gf_state->getCov().Print();

		for(int i=0;i<6;i++)
		{
			for(int j=i;j<6;j++)
			{
				out_track->set_error(i,j, gf_state->get6DCov()[i][j]);
//.........这里部分代码省略.........

开发者ID:pinkenburg，项目名称:coresoftware，代码行数:101，代码来源:PHG4TrackKalmanFitter.C

示例2:

inline TVector2 line_propagation(TVector3 Pi_momentum, double z_end, double z_start, double x_start=0, double y_start=0)
{
    double z_travelled = z_end - z_start;
    double scale = z_travelled/Pi_momentum.Pz();
    return TVector2(Pi_momentum.Px()*scale + x_start, Pi_momentum.Py()*scale + y_start);
}

开发者ID:12345ieee，项目名称:spectrometer，代码行数:6，代码来源:analysis.cpp

示例3: main

int main(int argc, char* argv[])
{
  TApplication theApp(srcName.Data(), &argc, argv);
//=============================================================================

  if (argc<5) return -1;
  TString sPath = argv[1]; if (sPath.IsNull()) return -1;
  TString sFile = argv[2]; if (sFile.IsNull()) return -1;
  TString sJetR = argv[3]; if (sJetR.IsNull()) return -1;
  TString sSjeR = argv[4]; if (sSjeR.IsNull()) return -1;
//=============================================================================

  sPath.ReplaceAll("#", "/");
//=============================================================================

  double dJetR = -1.;
  if (sJetR=="JetR02") dJetR = 0.2;
  if (sJetR=="JetR03") dJetR = 0.3;
  if (sJetR=="JetR04") dJetR = 0.4;
  if (sJetR=="JetR05") dJetR = 0.5;

  if (dJetR<0.) return -1;
  cout << "Jet R = " << dJetR << endl;
//=============================================================================

  double dSjeR = -1.;
  if (sSjeR=="SjeR01") dSjeR = 0.1;
  if (sSjeR=="SjeR02") dSjeR = 0.2;
  if (sSjeR=="SjeR03") dSjeR = 0.3;
  if (sSjeR=="SjeR04") dSjeR = 0.4;

  if (dSjeR<0.) return -1;
  cout << "Sub-jet R = " << dSjeR << endl;
//=============================================================================

  const double dJetsPtMin  = 0.1;
  const double dJetEtaMax  = 2.;
  const double dCutEtaMax  = 2.6;

  fastjet::GhostedAreaSpec areaSpc(dCutEtaMax);
  fastjet::JetDefinition   jetsDef(fastjet::antikt_algorithm, dJetR, fastjet::BIpt_scheme, fastjet::Best);
  fastjet::AreaDefinition  areaDef(fastjet::active_area_explicit_ghosts,areaSpc);

  fastjet::Selector selectJet = fastjet::SelectorAbsEtaMax(dJetEtaMax);
  fastjet::JetDefinition subjDef(fastjet::kt_algorithm, dSjeR, fastjet::BIpt_scheme, fastjet::Best);
//=============================================================================

  std::vector<fastjet::PseudoJet> fjInput;
//=============================================================================

  TFile *file = TFile::Open(Form("%s.root",sFile.Data()), "NEW");
  TList *list = new TList();

  TH1D *hWeightSum = new TH1D("hWeightSum", "", 1, 0., 1.); list->Add(hWeightSum);

  TH2D *hTrkPtEta = new TH2D("hTrkPtEta", "", 1000, 0., 500., 60, -3., 3.); hTrkPtEta->Sumw2(); list->Add(hTrkPtEta);
  TH2D *hTrkPtPhi = new TH2D("hTrkPtPhi", "", 1000, 0., 500., 20, -1., 1.); hTrkPtPhi->Sumw2(); list->Add(hTrkPtPhi);

  TH2D *hJetPtNsj = new TH2D("hJetPtNsj", "", 1000, 0., 1000., 100, -0.5, 99.5); hJetPtNsj->Sumw2(); list->Add(hJetPtNsj);


  TH2D *hJetPtEta = new TH2D("hJetPtEta", "", 1000, 0., 1000., 60, -3., 3.); hJetPtEta->Sumw2(); list->Add(hJetPtEta);
  TH2D *hJetPtPhi = new TH2D("hJetPtPhi", "", 1000, 0., 1000., 20, -1., 1.); hJetPtPhi->Sumw2(); list->Add(hJetPtPhi);

  TH2D *hLjePtEta = new TH2D("hLjePtEta", "", 1000, 0., 1000., 60, -3., 3.); hLjePtEta->Sumw2(); list->Add(hLjePtEta);
  TH2D *hLjePtPhi = new TH2D("hLjePtPhi", "", 1000, 0., 1000., 20, -1., 1.); hLjePtPhi->Sumw2(); list->Add(hLjePtPhi);

  TH2D *hNjePtEta = new TH2D("hNjePtEta", "", 1000, 0., 1000., 60, -3., 3.); hNjePtEta->Sumw2(); list->Add(hNjePtEta);
  TH2D *hNjePtPhi = new TH2D("hNjePtPhi", "", 1000, 0., 1000., 20, -1., 1.); hNjePtPhi->Sumw2(); list->Add(hNjePtPhi);


  TH2D *hJe2PtEta = new TH2D("hJe2PtEta", "", 1000, 0., 1000., 60, -3., 3.); hJe2PtEta->Sumw2(); list->Add(hJe2PtEta);
  TH2D *hJe2PtPhi = new TH2D("hJe2PtPhi", "", 1000, 0., 1000., 20, -1., 1.); hJe2PtPhi->Sumw2(); list->Add(hJe2PtPhi);

  TH2D *hLj2PtEta = new TH2D("hLj2PtEta", "", 1000, 0., 1000., 60, -3., 3.); hLj2PtEta->Sumw2(); list->Add(hLj2PtEta);
  TH2D *hLj2PtPhi = new TH2D("hLj2PtPhi", "", 1000, 0., 1000., 20, -1., 1.); hLj2PtPhi->Sumw2(); list->Add(hLj2PtPhi);

  TH2D *hNj2PtEta = new TH2D("hNj2PtEta", "", 1000, 0., 1000., 60, -3., 3.); hNj2PtEta->Sumw2(); list->Add(hNj2PtEta);
  TH2D *hNj2PtPhi = new TH2D("hNj2PtPhi", "", 1000, 0., 1000., 20, -1., 1.); hNj2PtPhi->Sumw2(); list->Add(hNj2PtPhi);
//=============================================================================

  HepMC::IO_GenEvent ascii_in(Form("%s/%s.hepmc",sPath.Data(),sFile.Data()), std::ios::in);
  HepMC::GenEvent *evt = ascii_in.read_next_event();

  while (evt) {
    fjInput.resize(0);
    double dWeight = evt->weights().back();
    double dXsect  = evt->cross_section()->cross_section() / 1e9;
    double dNorm   = dWeight * dXsect;
    hWeightSum->Fill(0.5, dWeight);

    TVector3 vTrk;
    for (HepMC::GenEvent::particle_const_iterator p=evt->particles_begin(); p!=evt->particles_end(); ++p) if ((*p)->status()==1) {
      double dTrkPt  = (*p)->momentum().perp(); if (dTrkPt<0.5) continue;
      double dTrkEta = (*p)->momentum().eta();  if (TMath::Abs(dTrkEta)>dCutEtaMax) continue;
      double dTrkPhi = (*p)->momentum().phi();  vTrk.SetPtEtaPhi(dTrkPt, dTrkEta, dTrkPhi);
      double dTrkCos = TMath::Cos(dTrkPhi); if (dTrkCos==1.) dTrkCos = 1. - 1e-6;

      fjInput.push_back(fastjet::PseudoJet(vTrk.Px(), vTrk.Py(), vTrk.Pz(), vTrk.Mag()));

//.........这里部分代码省略.........

开发者ID:xcheung，项目名称:AnaSubjetsMC，代码行数:101，代码来源:AnalysisQA.C

示例4: main

int main(int argc, char* argv[])
{
  TApplication theApp(srcName.Data(), &argc, argv);
//=============================================================================

  if (argc<5) return -1;
  TString sPath = argv[1]; if (sPath.IsNull()) return -1;
  TString sFile = argv[2]; if (sFile.IsNull()) return -1;
  TString sJetR = argv[3]; if (sJetR.IsNull()) return -1;
  TString sSjeR = argv[4]; if (sSjeR.IsNull()) return -1;
//=============================================================================

  sPath.ReplaceAll("#", "/");
//=============================================================================

  double dJetR = -1.;
  if (sJetR=="JetR02") dJetR = 0.2;
  if (sJetR=="JetR03") dJetR = 0.3;
  if (sJetR=="JetR04") dJetR = 0.4;
  if (sJetR=="JetR05") dJetR = 0.5;

  if (dJetR<0.) return -1;
  cout << "Jet R = " << dJetR << endl;
//=============================================================================

  double dSjeR = -1.;
  if (sSjeR=="SjeR01") dSjeR = 0.1;
  if (sSjeR=="SjeR02") dSjeR = 0.2;
  if (sSjeR=="SjeR03") dSjeR = 0.3;
  if (sSjeR=="SjeR04") dSjeR = 0.4;

  if (dSjeR<0.) return -1;
  cout << "Sub-jet R = " << dSjeR << endl;
//=============================================================================

  const double dJetsPtMin  = 0.001;
  const double dCutEtaMax  = 1.6;
  const double dJetEtaMax  = 1.;
  const double dJetAreaRef = TMath::Pi() * dJetR * dJetR;

  fastjet::GhostedAreaSpec areaSpc(dCutEtaMax);
  fastjet::JetDefinition   jetsDef(fastjet::antikt_algorithm, dJetR, fastjet::BIpt_scheme, fastjet::Best);

//fastjet::AreaDefinition  areaDef(fastjet::active_area,areaSpc);
  fastjet::AreaDefinition  areaDef(fastjet::active_area_explicit_ghosts,areaSpc);

//fastjet::JetDefinition   bkgsDef(fastjet::kt_algorithm, 0.2, fastjet::BIpt_scheme, fastjet::Best);
//fastjet::AreaDefinition  aBkgDef(fastjet::active_area_explicit_ghosts, areaSpc);

  fastjet::Selector selectJet = fastjet::SelectorAbsEtaMax(dJetEtaMax);
//fastjet::Selector selectRho = fastjet::SelectorAbsEtaMax(dCutEtaMax-0.2);
//fastjet::Selector selecHard = fastjet::SelectorNHardest(2);
//fastjet::Selector selectBkg = selectRho * (!(selecHard));
//fastjet::JetMedianBackgroundEstimator bkgsEstimator(selectBkg, bkgsDef, aBkgDef);
//fastjet::Subtractor                   bkgSubtractor(&bkgsEstimator);

  fastjet::JetDefinition subjDef(fastjet::antikt_algorithm, dSjeR, fastjet::BIpt_scheme, fastjet::Best);
//=============================================================================

  std::vector<fastjet::PseudoJet> fjInput;
//=============================================================================

  TList *list = new TList();
  TH1D *hWeightSum = new TH1D("hWeightSum", "", 1, 0., 1.); list->Add(hWeightSum);

  TH1D *hJet = new TH1D("hJet", "", 1000, 0., 1000.); hJet->Sumw2(); list->Add(hJet);
  TH2D *hJetNsj = new TH2D("hJetNsj", "", 1000, 0., 1000., 101, -0.5, 100.5); hJetNsj->Sumw2(); list->Add(hJetNsj);

  TH2D *hJetIsj = new TH2D("hJetIsj", "", 1000, 0., 1000., 1000, 0., 1000.); hJetIsj->Sumw2(); list->Add(hJetIsj);
  TH2D *hJet1sj = new TH2D("hJet1sj", "", 1000, 0., 1000., 1000, 0., 1000.); hJet1sj->Sumw2(); list->Add(hJet1sj);
  TH2D *hJet2sj = new TH2D("hJet2sj", "", 1000, 0., 1000., 1000, 0., 1000.); hJet2sj->Sumw2(); list->Add(hJet2sj);
  TH2D *hJetDsj = new TH2D("hJetDsj", "", 1000, 0., 1000., 1000, 0., 1000.); hJetDsj->Sumw2(); list->Add(hJetDsj);

  TH2D *hJetIsz = new TH2D("hJetIsz", "", 1000, 0., 1000., 120, 0., 1.2); hJetIsz->Sumw2(); list->Add(hJetIsz);
  TH2D *hJet1sz = new TH2D("hJet1sz", "", 1000, 0., 1000., 120, 0., 1.2); hJet1sz->Sumw2(); list->Add(hJet1sz);
  TH2D *hJet2sz = new TH2D("hJet2sz", "", 1000, 0., 1000., 120, 0., 1.2); hJet2sz->Sumw2(); list->Add(hJet2sz);
  TH2D *hJetDsz = new TH2D("hJetDsz", "", 1000, 0., 1000., 120, 0., 1.2); hJetDsz->Sumw2(); list->Add(hJetDsz);
//=============================================================================

  HepMC::IO_GenEvent ascii_in(Form("%s/%s.hepmc",sPath.Data(),sFile.Data()), std::ios::in);
  HepMC::GenEvent *evt = ascii_in.read_next_event();

  while (evt) {
    fjInput.resize(0);
    double dXsect  = evt->cross_section()->cross_section() / 1e9;
    double dWeight = evt->weights().back();
    double dNorm = dWeight * dXsect;
    hWeightSum->Fill(0.5, dWeight);

    TVector3 vPar;
    for (HepMC::GenEvent::particle_const_iterator p=evt->particles_begin(); p!=evt->particles_end(); ++p) if ((*p)->status()==1) {
      vPar.SetXYZ((*p)->momentum().px(), (*p)->momentum().py(), (*p)->momentum().pz());

      if ((TMath::Abs(vPar.Eta())<dCutEtaMax)) {
        fjInput.push_back(fastjet::PseudoJet(vPar.Px(), vPar.Py(), vPar.Pz(), vPar.Mag()));
      }
    }
//=============================================================================

    fastjet::ClusterSequenceArea clustSeq(fjInput, jetsDef, areaDef);
//.........这里部分代码省略.........

开发者ID:xcheung，项目名称:AnaSubjetsMC，代码行数:101，代码来源:AnaSjeJel_sAntikT.C

示例5: FillMissMomHistos

////////////////////////////////////////////////////////////////////////////////////
//Missing momentum vector histo filling/////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////
void TrigGlobalBranch::FillMissMomHistos(){
	
	TVector3 lvSumTemp;
	int imom, icent;
	float centralityTemp = -1.; 
	centralityTemp = AssignCentrality(Fcal_Et);
	icent = indexCentrality(centralityTemp);

	imom = 0;
	lvSumTemp = MissMom(500.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(700.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(1000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(2000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());


	++imom;
	lvSumTemp = MissMom(3000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(4000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(5000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(6000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(7000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
	hMissPyCent[imom][icent]->Fill(lvSumTemp.Py());

	++imom;
	lvSumTemp = MissMom(10000.0);
	hMissPt[imom]->Fill(lvSumTemp.Perp());
	hMissPx[imom]->Fill(lvSumTemp.Px());
	hMissPy[imom]->Fill(lvSumTemp.Py());
	hMissPtCent[imom][icent]->Fill(lvSumTemp.Perp());
	hMissPxCent[imom][icent]->Fill(lvSumTemp.Px());
//.........这里部分代码省略.........

开发者ID:Feynman27，项目名称:HIMuonSkimming，代码行数:101，代码来源:TrigGlobalBranch.C

注：本文中的TVector3::Py方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。