C++ TEXTE_MODULE::SetThickness方法代码示例

void DialogEditModuleText::OnOkClick( wxCommandEvent& event )
{
    wxString msg;

    if ( m_module)
        m_parent->SaveCopyInUndoList( m_module, UR_CHANGED );

    if( m_dc )     //Erase old text on screen
    {
        m_currentText->Draw( m_parent->GetCanvas(), m_dc, GR_XOR,
                             (m_currentText->IsMoving()) ? MoveVector : wxPoint( 0, 0 ) );
    }

    m_currentText->SetText( m_Name->GetValue() );
    m_currentText->SetItalic( m_Style->GetSelection() == 1 );

    wxPoint tmp;

    msg = m_TxtPosCtrlX->GetValue();
    tmp.x = ReturnValueFromString( g_UserUnit, msg );

    msg = m_TxtPosCtrlY->GetValue();
    tmp.y = ReturnValueFromString( g_UserUnit, msg );

    m_currentText->SetPos0( tmp );

    wxSize textSize( wxSize( ReturnValueFromString( g_UserUnit, m_TxtSizeCtrlX->GetValue() ),
                             ReturnValueFromString( g_UserUnit, m_TxtSizeCtrlY->GetValue() ) ) );

    // Test for a reasonnable size:
    if( textSize.x < TEXTS_MIN_SIZE )
        textSize.x = TEXTS_MIN_SIZE;
    if( textSize.y < TEXTS_MIN_SIZE )
        textSize.y = TEXTS_MIN_SIZE;

    m_currentText->SetSize( textSize ),

    msg = m_TxtWidthCtlr->GetValue();
    int width = ReturnValueFromString( g_UserUnit, msg );

    // Test for a reasonnable width:
    if( width <= 1 )
        width = 1;

    int maxthickness = Clamp_Text_PenSize(width, m_currentText->GetSize() );

    if( width > maxthickness )
    {
        DisplayError( NULL,
                      _( "The text thickness is too large for the text size. It will be clamped" ) );
        width = maxthickness;
    }

    m_currentText->SetThickness( width );

    m_currentText->SetVisible( m_Show->GetSelection() == 0 );

    int text_orient = (m_Orient->GetSelection() == 0) ? 0 : 900;
    m_currentText->SetOrientation( text_orient );

    m_currentText->SetDrawCoord();

    if( m_dc )     // Display new text
    {
        m_currentText->Draw( m_parent->GetCanvas(), m_dc, GR_XOR,
                             (m_currentText->IsMoving()) ? MoveVector : wxPoint( 0, 0 ) );
    }

    m_parent->OnModify();

    if( m_module )
        m_module->SetLastEditTime();

    EndModal(1);
}

//.........这里部分代码省略.........
                break;
            }
        }

        else if ( evt->IsClick( BUT_RIGHT ) )
        {
            showContextMenu();
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            // Place the drawing
            BOARD_ITEM_CONTAINER* parent = m_frame->GetModel();

            for( auto item : preview )
            {
                if( m_editModules )
                {
                    // Modules use different types for the same things,
                    // so we need to convert imported items to appropriate classes.
                    BOARD_ITEM* converted = NULL;

                    switch( item->Type() )
                    {
                    case PCB_TEXT_T:
                    {
                        TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item );
                        TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent );
                        // Assignment operator also copies the item PCB_TEXT_T type,
                        // so it cannot be added to a module which handles PCB_MODULE_TEXT_T
                        textMod->SetPosition( text->GetPosition() );
                        textMod->SetText( text->GetText() );
                        textMod->SetSize( text->GetSize() );
                        textMod->SetThickness( text->GetThickness() );
                        textMod->SetOrientation( text->GetOrientation() );
                        textMod->SetTextPosition( text->GetTextPosition() );
                        textMod->SetSize( text->GetSize() );
                        textMod->SetMirrored( text->IsMirrored() );
                        textMod->SetAttributes( text->GetAttributes() );
                        textMod->SetItalic( text->IsItalic() );
                        textMod->SetBold( text->IsBold() );
                        textMod->SetHorizJustify( text->GetHorizJustify() );
                        textMod->SetVertJustify( text->GetVertJustify() );
                        textMod->SetMultilineAllowed( text->IsMultilineAllowed() );
                        converted = textMod;
                        break;
                    }

                    case PCB_LINE_T:
                    {
                        DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item );
                        EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent );

                        // Assignment operator also copies the item PCB_LINE_T type,
                        // so it cannot be added to a module which handles PCB_MODULE_EDGE_T
                        modSeg->SetWidth( seg->GetWidth() );
                        modSeg->SetStart( seg->GetStart() );
                        modSeg->SetEnd( seg->GetEnd() );
                        modSeg->SetAngle( seg->GetAngle() );
                        modSeg->SetShape( seg->GetShape() );
                        modSeg->SetType( seg->GetType() );
                        modSeg->SetBezControl1( seg->GetBezControl1() );
                        modSeg->SetBezControl2( seg->GetBezControl2() );
                        modSeg->SetBezierPoints( seg->GetBezierPoints() );
                        modSeg->SetPolyPoints( seg->GetPolyPoints() );
                        converted = modSeg;

int DRAWING_TOOL::placeTextModule()
{
    TEXTE_MODULE* text = new TEXTE_MODULE( NULL );
    const BOARD_DESIGN_SETTINGS& dsnSettings = m_frame->GetDesignSettings();

    assert( m_editModules );

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );
    // do not capture or auto-pan until we start placing some text

    Activate();
    m_frame->SetToolID( ID_MODEDIT_TEXT_TOOL, wxCURSOR_PENCIL, _( "Add text" ) );
    bool placing = false;

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            preview.Clear();
            preview.ViewUpdate();
            m_controls->SetAutoPan( false );
            m_controls->CaptureCursor( false );
            m_controls->ShowCursor( true );

            if( !placing || evt->IsActivate() )
            {
                delete text;
                break;
            }
            else
            {
                placing = false;  // start from the beginning
            }
        }

        else if( text && evt->Category() == TC_COMMAND )
        {
            if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
            {
                text->Rotate( text->GetPosition(), m_frame->GetRotationAngle() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
            else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
            {
                text->Flip( text->GetPosition() );
                preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
            }
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            if( !placing )
            {
                text->SetSize( dsnSettings.m_ModuleTextSize );
                text->SetThickness( dsnSettings.m_ModuleTextWidth );
                text->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) );

                DialogEditModuleText textDialog( m_frame, text, NULL );
                placing = textDialog.ShowModal() && ( text->GetText().Length() > 0 );

                if( !placing )
                    continue;

                m_controls->CaptureCursor( true );
                m_controls->SetAutoPan( true );
                m_controls->ShowCursor( false );
                text->SetParent( m_board->m_Modules );  // it has to set after the settings dialog
                                                        // otherwise the dialog stores it in undo buffer
                preview.Add( text );
            }
            else
            {
                assert( text->GetText().Length() > 0 );
                assert( text->GetSize().x > 0 && text->GetSize().y > 0 );

                text->SetLocalCoord();
                text->ClearFlags();

                // Module has to be saved before any modification is made
                m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
                m_board->m_Modules->SetLastEditTime();
                m_board->m_Modules->GraphicalItems().PushFront( text );

                m_view->Add( text );
                text->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );

                m_frame->OnModify();

                preview.Remove( text );
                m_controls->CaptureCursor( false );
                m_controls->SetAutoPan( false );
//.........这里部分代码省略.........

int DRAWING_TOOL::PlaceText( const TOOL_EVENT& aEvent )
{
    BOARD_ITEM* text = NULL;
    const BOARD_DESIGN_SETTINGS& dsnSettings = m_frame->GetDesignSettings();
    BOARD_COMMIT commit( m_frame );

    // Add a VIEW_GROUP that serves as a preview for the new item
    SELECTION preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );
    // do not capture or auto-pan until we start placing some text

    SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::TEXT );

    Activate();
    m_frame->SetToolID( m_editModules ? ID_MODEDIT_TEXT_TOOL : ID_PCB_ADD_TEXT_BUTT,
                        wxCURSOR_PENCIL, _( "Add text" ) );

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        if( evt->IsCancel() || evt->IsActivate() )
        {
            if( text )
            {
                // Delete the old text and have another try
                delete text;
                text = NULL;

                preview.Clear();

                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );
                m_controls->ShowCursor( true );
            }
            else
                break;

            if( evt->IsActivate() )  // now finish unconditionally
                break;
        }

        else if( text && evt->Category() == TC_COMMAND )
        {
            if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
            {
                text->Rotate( text->GetPosition(), m_frame->GetRotationAngle() );
                m_view->Update( &preview );
            }
            // TODO rotate CCW
            else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
            {
                text->Flip( text->GetPosition() );
                m_view->Update( &preview );
            }
        }

        else if ( evt->IsClick( BUT_RIGHT ) )
        {
            showContextMenu();
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            if( !text )
            {
                // Init the new item attributes
                if( m_editModules )
                {
                    TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) m_frame->GetModel() );

                    textMod->SetLayer( m_frame->GetActiveLayer() );
                    textMod->SetSize( dsnSettings.m_ModuleTextSize );
                    textMod->SetThickness( dsnSettings.m_ModuleTextWidth );
                    textMod->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) );

                    DialogEditModuleText textDialog( m_frame, textMod, NULL );
                    bool placing;

                    RunMainStack( [&]() {
                        placing = textDialog.ShowModal() && ( textMod->GetText().Length() > 0 );
                    } );

                    if( placing )
                        text = textMod;
                    else
                        delete textMod;
                }
                else
                {
                    TEXTE_PCB* textPcb = new TEXTE_PCB( m_frame->GetModel() );
                    // TODO we have to set IS_NEW, otherwise InstallTextPCB.. creates an undo entry :| LEGACY_CLEANUP
                    textPcb->SetFlags( IS_NEW );

                    LAYER_ID layer = m_frame->GetActiveLayer();
//.........这里部分代码省略.........

void PCB_BASE_FRAME::ResetModuleTextSizes( const wxString & aFilter, bool aRef,
                                           bool aValue, bool aOthers )
{
    MODULE* module;
    BOARD_ITEM* boardItem;
    TEXTE_MODULE* item;
    ITEM_PICKER itemWrapper( NULL, UR_CHANGED );
    PICKED_ITEMS_LIST undoItemList;
    unsigned int ii;

    // Prepare undo list
    for( module = GetBoard()->m_Modules; module; module = module->Next() )
    {
        itemWrapper.SetItem( module );

        if( ! aFilter.IsEmpty() )
        {
            if( ! WildCompareString( aFilter, FROM_UTF8( module->GetFPID().Format().c_str() ),
                                     false ) )
                continue;
        }


        if( aRef )
        {
            item = &module->Reference();

            if( item->GetSize() != GetDesignSettings().m_ModuleTextSize ||
                item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
            {
                undoItemList.PushItem( itemWrapper );
            }
        }

        if( aValue )
        {
            item = &module->Value();

            if( item->GetSize() != GetDesignSettings().m_ModuleTextSize ||
                item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
            {
                undoItemList.PushItem( itemWrapper );
            }
        }

        if( aOthers )
        {
            // Go through all other module text fields
            for( boardItem = module->GraphicalItems(); boardItem; boardItem = boardItem->Next() )
            {
                if( boardItem->Type() == PCB_MODULE_TEXT_T )
                {
                    item = (TEXTE_MODULE*) boardItem;

                    if( item->GetSize() != GetDesignSettings().m_ModuleTextSize
                        || item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
                    {
                        undoItemList.PushItem( itemWrapper );
                    }
                }
            }
        }
    }

    // Exit if there's nothing to do
    if( !undoItemList.GetCount() )
        return;

    SaveCopyInUndoList( undoItemList, UR_CHANGED );

    // Apply changes to modules in the undo list
    for( ii = 0; ii < undoItemList.GetCount(); ii++ )
    {
        module = (MODULE*) undoItemList.GetPickedItem( ii );

        if( aRef )
        {
            module->Reference().SetThickness( GetDesignSettings().m_ModuleTextWidth );
            module->Reference().SetSize( GetDesignSettings().m_ModuleTextSize );
        }

        if( aValue )
        {
            module->Value().SetThickness( GetDesignSettings().m_ModuleTextWidth );
            module->Value().SetSize( GetDesignSettings().m_ModuleTextSize );
        }

        if( aOthers )
        {
            for( boardItem = module->GraphicalItems(); boardItem; boardItem = boardItem->Next() )
            {
                if( boardItem->Type() == PCB_MODULE_TEXT_T )
                {
                    item = (TEXTE_MODULE*) boardItem;
                    item->SetThickness( GetDesignSettings().m_ModuleTextWidth );
                    item->SetSize( GetDesignSettings().m_ModuleTextSize );
                }
            }
        }
    }
//.........这里部分代码省略.........