当前位置: 首页>>代码示例>>C++>>正文


C++ TEXTE_MODULE::GetType方法代码示例

本文整理汇总了C++中TEXTE_MODULE::GetType方法的典型用法代码示例。如果您正苦于以下问题:C++ TEXTE_MODULE::GetType方法的具体用法?C++ TEXTE_MODULE::GetType怎么用?C++ TEXTE_MODULE::GetType使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在TEXTE_MODULE的用法示例。


在下文中一共展示了TEXTE_MODULE::GetType方法的6个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: RemoveStruct

void FOOTPRINT_EDIT_FRAME::RemoveStruct( EDA_ITEM* Item )
{
    if( Item == NULL )
        return;

    switch( Item->Type() )
    {
    case PCB_PAD_T:
        DeletePad( (D_PAD*) Item, false );
        break;

    case PCB_MODULE_TEXT_T:
    {
        TEXTE_MODULE* text = (TEXTE_MODULE*) Item;

        if( text->GetType() == TEXT_is_REFERENCE )
        {
            DisplayError( this, _( "Text is REFERENCE!" ) );
            break;
        }

        if( text->GetType() == TEXT_is_VALUE )
        {
            DisplayError( this, _( "Text is VALUE!" ) );
            break;
        }

        DeleteTextModule( text );
    }
    break;

    case PCB_MODULE_EDGE_T:
        Delete_Edge_Module( (EDGE_MODULE*) Item );
        m_canvas->Refresh();
        break;

    case PCB_MODULE_T:
        break;

    default:
    {
        wxString Line;
        Line.Printf( wxT( " Remove: draw item type %d unknown." ), Item->Type() );
        DisplayError( this, Line );
    }
    break;
    }
}
开发者ID:james-sakalaukus,项目名称:kicad,代码行数:48,代码来源:editmod.cpp

示例2: RemoveStruct

void FOOTPRINT_EDIT_FRAME::RemoveStruct( EDA_ITEM* Item )
{
    if( Item == NULL )
        return;

    switch( Item->Type() )
    {
    case PCB_PAD_T:
        DeletePad( (D_PAD*) Item, false );
        break;

    case PCB_MODULE_TEXT_T:
    {
        TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( Item );

        switch( text->GetType() )
        {
        case TEXTE_MODULE::TEXT_is_REFERENCE:
            DisplayError( this, _( "Cannot delete REFERENCE!" ) );
            break;

        case TEXTE_MODULE::TEXT_is_VALUE:
            DisplayError( this, _( "Cannot delete VALUE!" ) );
            break;

        case TEXTE_MODULE::TEXT_is_DIVERS:
            DeleteTextModule( text );
        }
    }
    break;

    case PCB_MODULE_EDGE_T:
        Delete_Edge_Module( (EDGE_MODULE*) Item );
        m_canvas->Refresh();
        break;

    case PCB_MODULE_T:
        break;

    default:
    {
        wxString Line;
        Line.Printf( wxT( " RemoveStruct: item type %d unknown." ), Item->Type() );
        wxMessageBox( Line );
    }
    break;
    }
}
开发者ID:PatMart,项目名称:kicad-source-mirror,代码行数:48,代码来源:editmod.cpp

示例3: remove

void EDIT_TOOL::remove( BOARD_ITEM* aItem )
{
    BOARD* board = getModel<BOARD>();

    switch( aItem->Type() )
    {
    case PCB_MODULE_T:
    {
        MODULE* module = static_cast<MODULE*>( aItem );
        module->ClearFlags();
        module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, getView(), _1 ) );

        // Module itself is deleted after the switch scope is finished
        // list of pads is rebuild by BOARD::BuildListOfNets()

        // Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
        board->m_Status_Pcb = 0;
    }
    break;

    // Default removal procedure
    case PCB_MODULE_TEXT_T:
    {
        TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( aItem );

        switch( text->GetType() )
        {
        case TEXTE_MODULE::TEXT_is_REFERENCE:
            DisplayError( getEditFrame<PCB_BASE_FRAME>(), _( "Cannot delete component reference." ) );
            return;

        case TEXTE_MODULE::TEXT_is_VALUE:
            DisplayError( getEditFrame<PCB_BASE_FRAME>(), _( "Cannot delete component value." ) );
            return;

        case TEXTE_MODULE::TEXT_is_DIVERS:    // suppress warnings
            break;
        }

        if( m_editModules )
        {
            MODULE* module = static_cast<MODULE*>( aItem->GetParent() );
            module->SetLastEditTime();
            board->m_Status_Pcb = 0; // it is done in the legacy view
            aItem->DeleteStructure();
        }

        return;
    }

    case PCB_PAD_T:
    case PCB_MODULE_EDGE_T:
    {
        MODULE* module = static_cast<MODULE*>( aItem->GetParent() );
        module->SetLastEditTime();

        board->m_Status_Pcb = 0; // it is done in the legacy view


        if( !m_editModules )
        {
            getView()->Remove( aItem );
            board->Remove( aItem );
        }

        aItem->DeleteStructure();

        return;
    }

    case PCB_LINE_T:                // a segment not on copper layers
    case PCB_TEXT_T:                // a text on a layer
    case PCB_TRACE_T:               // a track segment (segment on a copper layer)
    case PCB_VIA_T:                 // a via (like track segment on a copper layer)
    case PCB_DIMENSION_T:           // a dimension (graphic item)
    case PCB_TARGET_T:              // a target (graphic item)
    case PCB_MARKER_T:              // a marker used to show something
    case PCB_ZONE_T:                // SEG_ZONE items are now deprecated
    case PCB_ZONE_AREA_T:
        break;

    default:                        // other types do not need to (or should not) be handled
        assert( false );
        return;
    }

    getView()->Remove( aItem );
    board->Remove( aItem );
}
开发者ID:OpenEE,项目名称:micad,代码行数:89,代码来源:edit_tool.cpp

示例4: initDlg

void DialogEditModuleText::initDlg( )
{
    SetFocus();

    wxString msg;

    if( m_module )
    {
        wxString format = m_ModuleInfoText->GetLabel();
        msg.Printf( format,
                    GetChars( m_module->GetReference() ),
                    GetChars( m_module->GetValue() ),
                    m_module->GetOrientation() / 10.0 );
    }
    else
    {
        msg.Empty();
    }

    m_ModuleInfoText->SetLabel( msg );

    switch( m_currentText->GetType() )
    {
    case TEXTE_MODULE::TEXT_is_VALUE:
        m_TextDataTitle->SetLabel( _( "Value:" ) );
        break;

    case TEXTE_MODULE::TEXT_is_DIVERS:
        m_TextDataTitle->SetLabel( _( "Text:" ) );
        break;

    default:
        m_TextDataTitle->SetLabel( _( "Reference:" ) );
        break;
    }

    m_Name->SetValue( m_currentText->GetText() );

    m_Style->SetSelection( m_currentText->IsItalic() ? 1 : 0 );

    AddUnitSymbol( *m_SizeXTitle );
    PutValueInLocalUnits( *m_TxtSizeCtrlX, m_currentText->GetSize().x );

    AddUnitSymbol( *m_SizeYTitle );
    PutValueInLocalUnits( *m_TxtSizeCtrlY, m_currentText->GetSize().y );

    AddUnitSymbol( *m_PosXTitle );
    PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x );

    AddUnitSymbol( *m_PosYTitle );
    PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y );

    AddUnitSymbol( *m_WidthTitle );
    PutValueInLocalUnits( *m_TxtWidthCtlr, m_currentText->GetThickness() );

    double text_orient = m_currentText->GetOrientation();
    NORMALIZE_ANGLE_90( text_orient );

    if( (text_orient != 0) )
        m_Orient->SetSelection( 1 );

    if( !m_currentText->IsVisible() )
        m_Show->SetSelection( 1 );;
}
开发者ID:ianohara,项目名称:kicad-source-mirror,代码行数:64,代码来源:dialog_edit_module_text.cpp

示例5: Push


//.........这里部分代码省略.........
                    // modules inside modules are not supported yet
                    wxASSERT( boardItem->Type() != PCB_MODULE_T );

                    boardItem->SetParent( board->m_Modules.GetFirst() );

                    if( !( changeFlags & CHT_DONE ) )
                        board->m_Modules->Add( boardItem );
                }

                view->Add( boardItem );
                break;
            }

            case CHT_REMOVE:
            {
                if( !m_editModules && aCreateUndoEntry )
                    undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );

                switch( boardItem->Type() )
                {
                // Module items
                case PCB_PAD_T:
                case PCB_MODULE_EDGE_T:
                case PCB_MODULE_TEXT_T:
                    // This level can only handle module items when editing modules
                    if( !m_editModules )
                        break;

                    if( boardItem->Type() == PCB_MODULE_TEXT_T )
                    {
                        TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );

                        // don't allow deletion of Reference or Value
                        if( text->GetType() != TEXTE_MODULE::TEXT_is_DIVERS )
                            break;
                    }

                    view->Remove( boardItem );

                    if( !( changeFlags & CHT_DONE ) )
                    {
                        MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
                        wxASSERT( module && module->Type() == PCB_MODULE_T );
                        module->Delete( boardItem );
                    }

                    board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)

                    break;

                // Board items
                case PCB_LINE_T:                // a segment not on copper layers
                case PCB_TEXT_T:                // a text on a layer
                case PCB_TRACE_T:               // a track segment (segment on a copper layer)
                case PCB_VIA_T:                 // a via (like track segment on a copper layer)
                case PCB_DIMENSION_T:           // a dimension (graphic item)
                case PCB_TARGET_T:              // a target (graphic item)
                case PCB_MARKER_T:              // a marker used to show something
                case PCB_ZONE_AREA_T:
                    itemsToDeselect.push_back( boardItem );

                    view->Remove( boardItem );

                    if( !( changeFlags & CHT_DONE ) )
                        board->Remove( boardItem );
开发者ID:johnbeard,项目名称:kicad,代码行数:66,代码来源:board_commit.cpp

示例6: Push


//.........这里部分代码省略.........

                    if( !( changeFlags & CHT_DONE ) )
                        board->m_Modules->Add( boardItem );
                }

                view->Add( boardItem );
                break;
            }

            case CHT_REMOVE:
            {
                if( !m_editModules )
                {
                    undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
                }

                switch( boardItem->Type() )
                {
                // Module items
                case PCB_PAD_T:
                case PCB_MODULE_EDGE_T:
                case PCB_MODULE_TEXT_T:
                {
                    // Do not allow footprint text removal when not editing a module
                    if( !m_editModules )
                        break;

                    bool remove = true;

                    if( boardItem->Type() == PCB_MODULE_TEXT_T )
                    {
                        TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );

                        switch( text->GetType() )
                        {
                            case TEXTE_MODULE::TEXT_is_REFERENCE:
                                //DisplayError( frame, _( "Cannot delete component reference." ) );
                                remove = false;
                                break;

                            case TEXTE_MODULE::TEXT_is_VALUE:
                                //DisplayError( frame, _( "Cannot delete component value." ) );
                                remove = false;
                                break;

                            case TEXTE_MODULE::TEXT_is_DIVERS:    // suppress warnings
                                break;

                            default:
                                assert( false );
                                break;
                        }
                    }

                    if( remove )
                    {
                        view->Remove( boardItem );

                        if( !( changeFlags & CHT_DONE ) )
                        {
                            MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
                            assert( module && module->Type() == PCB_MODULE_T );
                            module->Delete( boardItem );
                        }

                        board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
开发者ID:nikgul,项目名称:kicad-source-mirror,代码行数:67,代码来源:board_commit.cpp


注:本文中的TEXTE_MODULE::GetType方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。