当前位置: 首页>>代码示例>>C++>>正文

C++ StdMat2::SetOpacity方法代码示例

本文整理汇总了C++中StdMat2::SetOpacity方法的典型用法代码示例。如果您正苦于以下问题：C++ StdMat2::SetOpacity方法的具体用法？C++ StdMat2::SetOpacity怎么用？C++ StdMat2::SetOpacity使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类StdMat2的用法示例。


在下文中一共展示了StdMat2::SetOpacity方法的6个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: FindOrCreateMaterial

Mtl* FindOrCreateMaterial(MtlBaseLib* library, Interface* max_interface, int& slot, const IfcGeom::Material& material) {
	Mtl* m = FindMaterialByName(library, material.name());
	if (m == 0) {
		StdMat2* stdm = NewDefaultStdMat();
		const TimeValue t = -1;
		if (material.hasDiffuse()) {
			const double* diffuse = material.diffuse();
			stdm->SetDiffuse(Color(diffuse[0], diffuse[1], diffuse[2]),t);
		}
		if (material.hasSpecular()) {
			const double* specular = material.specular();
			stdm->SetSpecular(Color(specular[0], specular[1], specular[2]),t);
		}
		if (material.hasSpecularity()) {
			stdm->SetShininess(material.specularity(), t);
		}
		if (material.hasTransparency()) {
			stdm->SetOpacity(1.0 - material.transparency(), t);
		}
		m = stdm;
		m->SetName(S(material.name()));
		library->Add(m);
		if (slot < NUM_MATERIAL_SLOTS) {
			max_interface->PutMtlToMtlEditor(m,slot++);
		}
	}
	return m;
}
开发者ID:15921050052，项目名称:IfcOpenShell，代码行数:28，代码来源:IfcMax.cpp

示例2: PanelProc


//.........这里部分代码省略.........
						ShowWindow( GetDlgItem(hwndDlg, IDC_SI_EDIT), SW_SHOW );
						ShowWindow( GetDlgItem(hwndDlg, IDC_SI_SPIN), SW_SHOW );
					}
				    NotifyChanged();
//					UpdateMtlDisplay();
				}
				break;
			}
			break;
		case CC_COLOR_SEL: {
			int id = LOWORD(wParam);
			SelectEditColor(ColorIDCToIndex(id));
		}			
		break;
		case CC_COLOR_DROP:	{
			int id = LOWORD(wParam);
			SelectEditColor(ColorIDCToIndex(id));
			UpdateMtlDisplay();				
		}
		break;
		case CC_COLOR_BUTTONDOWN:
			theHold.Begin();
		 break;
		case CC_COLOR_BUTTONUP:
			if (HIWORD(wParam)) theHold.Accept(GetString(IDS_DS_PARAMCHG));
			else theHold.Cancel();
			UpdateMtlDisplay();				
			break;
		case CC_COLOR_CHANGE: {			
			int id = LOWORD(wParam);
			int buttonUp = HIWORD(wParam); 
			int n = ColorIDCToIndex(id);
			if (buttonUp) theHold.Begin();
			Color curColor(cs[n]->GetColor());
			SetMtlColor(n, curColor, pShader, cs, curTime);
			if (buttonUp) {
				theHold.Accept(GetString(IDS_DS_PARAMCHG));
				// DS: 5/11/99-  this was commented out. I put it back in, because
				// it is necessary for the Reset button in the color picker to 
				// update the viewport.				
				UpdateMtlDisplay();  
				}
		} break;
		case WM_PAINT: 
			if (!valid) {
				valid = TRUE;
				ReloadDialog();
				}
			return FALSE;
		case WM_CLOSE:
		case WM_DESTROY: 
			break;
		case CC_SPINNER_CHANGE: 
			if (!theHold.Holding()) theHold.Begin();
			switch (id) {
				case IDC_SH_SPIN: 
					pShader->SetGlossiness(PcToFrac(shSpin->GetIVal()), curTime); 
					UpdateHilite();
					break;
				case IDC_SS_SPIN: 
					pShader->SetSpecularLevel(PcToFrac(ssSpin->GetIVal()),curTime); 
					UpdateHilite();
					break;
				case IDC_SOFT_SPIN: 
					pShader->SetSoftenLevel(softSpin->GetFVal(),curTime); 
					break;
				case IDC_SI_SPIN: 
					pShader->SetSelfIllum(PcToFrac(siSpin->GetIVal()),curTime); 
					break;
				case IDC_DIFFLEV_SPIN: 
					pShader->SetDiffuseLevel(PcToFrac(dlevSpin->GetIVal()),curTime); 
					break;
				case IDC_DIFFROUGH_SPIN: 
					pShader->SetDiffuseRoughness(PcToFrac(roughSpin->GetIVal()),curTime); 
					break;
				//******** >>>><<<< required handling for opacity....must be present in all dialogs
				case IDC_TR_SPIN: 
					pMtl->SetOpacity(PcToFrac( trSpin->GetIVal()),curTime); 
					break;
			}
//			UpdateMtlDisplay();
		break;

		case CC_SPINNER_BUTTONDOWN:
			theHold.Begin();
			break;

		case WM_CUSTEDIT_ENTER:
		case CC_SPINNER_BUTTONUP: 
			if (HIWORD(wParam) || msg==WM_CUSTEDIT_ENTER) 
				theHold.Accept(GetString(IDS_DS_PARAMCHG));
			else 
				theHold.Cancel();
			UpdateMtlDisplay();
			break;

    }
	exit:
	return FALSE;
	}
开发者ID:2asoft，项目名称:xray，代码行数:101，代码来源:shaderonb.cpp

示例3: PanelProc

INT_PTR StraussShaderDlg::PanelProc(HWND hwndDlg, UINT msg, WPARAM wParam, LPARAM lParam ) 
{
   int id = LOWORD(wParam);
   int code = HIWORD(wParam);
    switch (msg) {
      case WM_INITDIALOG:
         {
         HDC theHDC = GetDC(hwndDlg);
         hOldPal = GetGPort()->PlugPalette(theHDC);
         ReleaseDC(hwndDlg,theHDC);

         HWND hwndCS = GetDlgItem(hwndDlg, IDC_COLOR);
         cs[0] = GetIColorSwatch( hwndCS, pShader->GetDiffuseClr(), GetString(IDS_KE_COLOR) );

         hwHilite = GetDlgItem(hwndDlg, IDC_HIGHLIGHT);
         DLSetWindowLongPtr( hwHilite, HiliteWndProc);

         glSpin = SetupIntSpinner(hwndDlg, IDC_GL_SPIN, IDC_GL_EDIT, 0,100, 0);
         mtSpin = SetupIntSpinner(hwndDlg, IDC_MT_SPIN, IDC_MT_EDIT, 0,100, 0);
         trSpin = SetupIntSpinner(hwndDlg, IDC_TR_SPIN, IDC_TR_EDIT, 0,100, 0);

         for (int j=0; j<NMBUTS; j++) {
            texMBut[j] = GetICustButton(GetDlgItem(hwndDlg,texMButtonsIDC[j]));
            assert( texMBut[j] );
            texMBut[j]->SetRightClickNotify(TRUE);
            texMBut[j]->SetDADMgr(&dadMgr);
         }
         LoadDialog(TRUE);
      }
      break;

      case WM_COMMAND: 
         {
         for ( int i=0; i<NMBUTS; i++) {
            if (id == texMButtonsIDC[i]) {
               PostMessage(hwmEdit,WM_TEXMAP_BUTTON, texmapFromMBut[i],(LPARAM)pMtl );
               UpdateMapButtons();
               goto exit;
               }
            }
         }

         break; // WM_COMMAND

      case CC_COLOR_SEL: {
         int id = LOWORD(wParam);
         SelectEditColor(ColorIDCToIndex(id));
      }        
      break;
      case CC_COLOR_DROP:  {
         int id = LOWORD(wParam);
         SelectEditColor(ColorIDCToIndex(id));
         UpdateMtlDisplay();           
      }
      break;
      case CC_COLOR_BUTTONDOWN:
         theHold.Begin();
       break;
      case CC_COLOR_BUTTONUP:
         if (HIWORD(wParam)) theHold.Accept(GetString(IDS_DS_PARAMCHG));
         else theHold.Cancel();
         UpdateMtlDisplay();           
         break;
      case CC_COLOR_CHANGE: {       
         int id = LOWORD(wParam);
         int buttonUp = HIWORD(wParam); 
         int n = ColorIDCToIndex(id);
         if (buttonUp) theHold.Begin();
         Color curColor(cs[n]->GetColor());
         pShader->SetDiffuseClr(curColor, curTime); 
         if (buttonUp) {
            theHold.Accept(GetString(IDS_DS_PARAMCHG));
            // DS: 5/11/99-  this was commented out. I put it back in, because
            // it is necessary for the Reset button in the color picker to 
            // update the viewport.          
            UpdateMtlDisplay();  
            }
      } break;
      case WM_PAINT: 
         if (!valid) {
            valid = TRUE;
            ReloadDialog();
            }
         return FALSE;
      case WM_CLOSE:
      case WM_DESTROY: 
         break;
      case CC_SPINNER_CHANGE: 
         if (!theHold.Holding()) theHold.Begin();
         switch (id) {
            case IDC_GL_SPIN: 
               pShader->SetGlossiness(PcToFrac( glSpin->GetIVal() ), curTime); 
               UpdateHilite();
               break;
            case IDC_MT_SPIN: 
               pShader->SetMetalness(PcToFrac(mtSpin->GetIVal()), curTime); 
               break;
            //******** >>>><<<< required handling for opacity....must be present in all dialogs
            case IDC_TR_SPIN: 
               pMtl->SetOpacity(PcToFrac( trSpin->GetIVal()),curTime); 
//.........这里部分代码省略.........
开发者ID:artemeliy，项目名称:inf4715，代码行数:101，代码来源:shaderstrauss.cpp

示例4: PanelProc


//.........这里部分代码省略.........
				
				case IDC_LOCK_DS:
					SetLockDS(IsButtonChecked(hwndDlg, IDC_LOCK_DS));
					UpdateMtlDisplay();
					break;
				
				case IDC_LOCK_ADTEX:{
					BOOL on = IsButtonChecked(hwndDlg, IDC_LOCK_ADTEX);
					SetLockADTex(on);
					UpdateMtlDisplay();
				} break;

			}
			break;
		case CC_COLOR_SEL: {
			int id = LOWORD(wParam);
			SelectEditColor(ColorIDCToIndex(id));
		}			
		break;
		case CC_COLOR_DROP:	{
			int id = LOWORD(wParam);
			SelectEditColor(ColorIDCToIndex(id));
			UpdateMtlDisplay();				
		}
		break;
		case CC_COLOR_BUTTONDOWN:
			theHold.Begin();
		 break;
		case CC_COLOR_BUTTONUP:
			if (HIWORD(wParam)) theHold.Accept(GetString(IDS_DS_PARAMCHG));
			else theHold.Cancel();
			UpdateMtlDisplay();				
			break;
		case CC_COLOR_CHANGE: {			
			int id = LOWORD(wParam);
			int buttonUp = HIWORD(wParam); 
			int n = ColorIDCToIndex(id);
			if (buttonUp) theHold.Begin();
			Color curColor(cs[n]->GetColor());
			SetMtlColor(n, curColor, pShader, cs, curTime);
			if (buttonUp) {
				theHold.Accept(GetString(IDS_DS_PARAMCHG));
				// DS: 5/11/99-  this was commented out. I put it back in, because
				// it is necessary for the Reset button in the color picker to 
				// update the viewport.				
				UpdateMtlDisplay();  
				}
		} break;
		case WM_PAINT: 
			if (!valid) {
				valid = TRUE;
				ReloadDialog();
				}
			return FALSE;
		case WM_CLOSE:
		case WM_DESTROY: 
			break;
		case CC_SPINNER_CHANGE: 
			if (!theHold.Holding()) theHold.Begin();
			switch (id) {
				case IDC_GLX_SPIN: 
					pShader->SetGlossiness(ALPHA_MAX - PcToFrac( glxSpin->GetIVal() ) * ALPHA_SZ, curTime); 
					UpdateHilite();
					break;
				case IDC_GLY_SPIN: 
					pShader->SetGlossinessY(ALPHA_MAX - PcToFrac(glySpin->GetIVal()) * ALPHA_SZ, curTime); 
					UpdateHilite();
					break;
				case IDC_SLEV_SPIN: 
					pShader->SetSpecularLevel(SPEC_MAX * PcToFrac(slevSpin->GetIVal()),curTime); 
					UpdateHilite();
					break;
				case IDC_DLEV_SPIN: 
					pShader->SetDiffuseLevel(PcToFrac(dlevSpin->GetIVal()),curTime); 
					break;
				//******** >>>><<<< required handling for opacity....must be present in all dialogs
				case IDC_TR_SPIN: 
					pMtl->SetOpacity(PcToFrac( trSpin->GetIVal()),curTime); 
					break;
			}
//			UpdateMtlDisplay();
		break;

		case CC_SPINNER_BUTTONDOWN:
			theHold.Begin();
			break;

		case WM_CUSTEDIT_ENTER:
		case CC_SPINNER_BUTTONUP: 
			if (HIWORD(wParam) || msg==WM_CUSTEDIT_ENTER) 
				theHold.Accept(GetString(IDS_DS_PARAMCHG));
			else 
				theHold.Cancel();
			UpdateMtlDisplay();
			break;

    }
	exit:
	return FALSE;
	}
开发者ID:2asoft，项目名称:xray，代码行数:101，代码来源:shaderward.cpp

示例5: NewDefaultStdMat

StdMat2 *NifImporter::ImportMaterialAndTextures(ImpNode *node, NiAVObjectRef avObject)
{
   // Texture
   NiMaterialPropertyRef matRef = avObject->GetPropertyByType(NiMaterialProperty::TYPE);
   if (matRef != NULL){

		StdMat2 *m = NewDefaultStdMat();
		m->SetName(matRef->GetName().c_str());
		if (showTextures) {
			m->SetMtlFlag(MTL_DISPLAY_ENABLE_FLAGS, TRUE);
		}

		// try the civ4 shader first then default back to normal shaders
		if (ImportNiftoolsShader(node, avObject, m)) {
			return m;
		}

		NiTexturingPropertyRef texRef = avObject->GetPropertyByType(NiTexturingProperty::TYPE);
		NiWireframePropertyRef wireRef = avObject->GetPropertyByType(NiWireframeProperty::TYPE);
		NiAlphaPropertyRef alphaRef = avObject->GetPropertyByType(NiAlphaProperty::TYPE);
		NiStencilPropertyRef stencilRef = avObject->GetPropertyByType(NiStencilProperty::TYPE);
		NiShadePropertyRef shadeRef = avObject->GetPropertyByType(NiShadeProperty::TYPE);
		vector<NiPropertyRef> props = avObject->GetProperties();

		if (IsFallout3()) {
			m->SetAmbient(Color(0.588f, 0.588f, 0.588f),0);
			m->SetDiffuse(Color(0.588f, 0.588f, 0.588f),0);
			m->SetSpecular(Color(0.902f, 0.902f, 0.902f),0);
		} else {
			m->SetAmbient(TOCOLOR(matRef->GetAmbientColor()),0);
			m->SetDiffuse(TOCOLOR(matRef->GetDiffuseColor()),0);
			m->SetSpecular(TOCOLOR(matRef->GetSpecularColor()),0);
		}
      Color c = TOCOLOR(matRef->GetEmissiveColor());
      if (c.r != 0 || c.b != 0 || c.g != 0) {
         m->SetSelfIllumColorOn(TRUE);
         m->SetSelfIllumColor(c,0);
      }
      m->SetShinStr(0.0,0);
      m->SetShininess(matRef->GetGlossiness()/100.0,0);
      m->SetOpacity(matRef->GetTransparency(),0);

      bool hasShaderAttributes = (wireRef != NULL) || (stencilRef != NULL) || (shadeRef != NULL);
      if (m->SupportsShaders() && hasShaderAttributes) {
         if (Shader *s = m->GetShader()) {
            if (wireRef != NULL && (wireRef->GetFlags() & 1)) {
               BOOL value = TRUE;
               m->SetWire(value);
            }
            if (stencilRef != NULL) {
				if (stencilRef->GetFaceDrawMode() == DRAW_BOTH) {
                  BOOL value = TRUE;
                  m->SetTwoSided(value);
               }
            }
            if (shadeRef != NULL && shadeRef->GetFlags() & 1) {
               m->SetFaceted(TRUE);
            }
         }
      }

      if (NULL != texRef)
      {
         // Handle Base/Detail ???
         if (texRef->HasTexture(DECAL_0_MAP)){
            if (Texmap* tex = CreateTexture(texRef->GetTexture(DECAL_0_MAP)))
               m->SetSubTexmap(ID_DI, tex);
            if (texRef->HasTexture(BASE_MAP)){
               m->LockAmbDiffTex(FALSE);
               if (Texmap* tex = CreateTexture(texRef->GetTexture(BASE_MAP)))
                  m->SetSubTexmap(ID_AM, tex);
            }
         } else if (texRef->HasTexture(BASE_MAP)) {
			 if (Texmap* tex = CreateTexture(texRef->GetTexture(BASE_MAP))) {
               m->SetSubTexmap(ID_DI, tex);
			   if (showTextures) gi->ActivateTexture(tex,m);
			 }
         } 
         // Handle Bump map
         if (texRef->HasTexture(BUMP_MAP)) {
            if (Texmap* tex = CreateTexture(texRef->GetTexture(BUMP_MAP)))
               m->SetSubTexmap(ID_BU, CreateNormalBump(NULL, tex));
         }
         // Shiny map
         if (texRef->HasTexture(GLOSS_MAP)) {
            if (Texmap* tex = CreateTexture(texRef->GetTexture(GLOSS_MAP)))
               m->SetSubTexmap(ID_SS, tex);
         }
         // Self illumination
         if (texRef->HasTexture(GLOW_MAP)) {
            if (Texmap* tex = CreateTexture(texRef->GetTexture(GLOW_MAP)))
               m->SetSubTexmap(ID_SI, tex);
         }

         // Custom Shader Handling
         int nTex = texRef->GetShaderTextureCount();
         if (nTex > 0) {
            list<NiExtraDataRef> data = avObject->GetExtraData();
            NiGeometryRef trigeom = DynamicCast<NiGeometry>(avObject);
            if (trigeom->HasShader()) {
//.........这里部分代码省略.........
开发者ID:CruxAnsata，项目名称:max_nif_plugin，代码行数:101，代码来源:ImportMtlAndTex.cpp

示例6: createStandardMaterial

	//------------------------------
	StdMat2* MaterialCreator::createStandardMaterial( const COLLADAFW::EffectCommon& effectCommon, const String& name, const MaterialCreator::MaterialIdentifier& materialIdentifier )
	{
		StdMat2* material = NewDefaultStdMat();


		COLLADAFW::EffectCommon::ShaderType shaderType = effectCommon.getShaderType();
		switch ( shaderType )
		{
		case COLLADAFW::EffectCommon::SHADER_CONSTANT: 
			material->SetFaceted(true); // BUG393: Max actually does not support a constant shader!
		case COLLADAFW::EffectCommon::SHADER_BLINN: 
			material->SwitchShader(Class_ID(StandardMaterial::STD2_BLINN_SHADER_CLASS_ID, 0)); 
			break;
		case COLLADAFW::EffectCommon::SHADER_LAMBERT:
		case COLLADAFW::EffectCommon::SHADER_PHONG:
		case COLLADAFW::EffectCommon::SHADER_UNKNOWN:
		default: 
			material->SwitchShader(Class_ID(StandardMaterial::STD2_PHONG_CLASS_ID, 0)); 
			break;
		}


		// Retrieve the shader parameter blocks
		Shader* materialShader = material->GetShader();
		IParamBlock2* shaderParameters = (IParamBlock2*) materialShader->GetReference(0);
		IParamBlock2* extendedParameters = (IParamBlock2*) material->GetReference(StandardMaterial::EXTENDED_PB_REF);

		// Common material parameters
		material->SetName(name.c_str());
		const COLLADAFW::ColorOrTexture& diffuse = effectCommon.getDiffuse();

		if ( diffuse.isColor() )
			material->SetDiffuse( toMaxColor(diffuse), 0);

		const COLLADAFW::ColorOrTexture& emission = effectCommon.getEmission();
		if ( emission.isColor() )
		{
			material->SetSelfIllumColorOn(TRUE);
			material->SetSelfIllumColor( toMaxColor(emission), 0);
		}
		else
		{
			material->SetSelfIllumColorOn(FALSE);
			material->SetSelfIllum( 0, 0 );
		}

		float maxOpacity = 1;
		const COLLADAFW::ColorOrTexture& opacity = effectCommon.getOpacity();
		if ( opacity.isColor() )
		{
			const COLLADAFW::Color& opacityColor = opacity.getColor(); 
			float averageTransparent = (float)(opacityColor.getRed() + opacityColor.getGreen() + opacityColor.getBlue())/3; 
			maxOpacity = averageTransparent;
		}

		if ( getDocumentImporter()->getInvertTransparency() )
		{
			maxOpacity = 1 - maxOpacity;
		}

		// Max seems to like to have opacity 0 for opacity textures
		if ( opacity.isTexture() )
		{
			material->SetOpacity( 0, 0);
		}
		else
		{
			material->SetOpacity( maxOpacity, 0);
		}

		if (shaderType != COLLADAFW::EffectCommon::SHADER_CONSTANT && shaderType != COLLADAFW::EffectCommon::SHADER_UNKNOWN)
		{
			// Unlock the ambient and diffuse colors
			materialShader->SetLockAD(FALSE);
			materialShader->SetLockADTex(FALSE);
			material->LockAmbDiffTex(FALSE);
			material->SyncADTexLock(FALSE);

			// Lambert/Phong material parameters
			const COLLADAFW::ColorOrTexture& ambient = effectCommon.getAmbient();
			if ( ambient.isColor() )
				material->SetAmbient( toMaxColor(ambient), 0);
		}
		else
		{
			// Approximate constant shader, specular is the same color
			if ( diffuse.isColor() )
				material->SetSpecular( toMaxColor(diffuse), 0 );
		}

		const COLLADAFW::ColorOrTexture& specular = effectCommon.getSpecular();
		const COLLADAFW::FloatOrParam& shininessFloatOrParam = effectCommon.getShininess();
		float shininess = 1;
		if ( shininessFloatOrParam.getType() == COLLADAFW::FloatOrParam::FLOAT )
		{
			shininess = shininessFloatOrParam.getFloatValue();
		}
		if ( shaderType == COLLADAFW::EffectCommon::SHADER_PHONG || shaderType == COLLADAFW::EffectCommon::SHADER_BLINN)
		{
//.........这里部分代码省略.........
开发者ID:AsherBond，项目名称:MondocosmOS，代码行数:101，代码来源:COLLADAMaxMaterialCreator.cpp


注：本文中的StdMat2::SetOpacity方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。