当前位置: 首页>>代码示例>>C++>>正文


C++ SpinBlock::multiplyCCD_sum方法代码示例

本文整理汇总了C++中SpinBlock::multiplyCCD_sum方法的典型用法代码示例。如果您正苦于以下问题:C++ SpinBlock::multiplyCCD_sum方法的具体用法?C++ SpinBlock::multiplyCCD_sum怎么用?C++ SpinBlock::multiplyCCD_sum使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在SpinBlock的用法示例。


在下文中一共展示了SpinBlock::multiplyCCD_sum方法的1个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: bratracedMatrix

void SpinAdapted::mps_nevpt::type1::BlockDecimateAndCompress (SweepParams &sweepParams, SpinBlock& system, SpinBlock& newSystem, const bool &useSlater, const bool& dot_with_sys, perturber& pb, int baseState)
{
  int sweepiter = sweepParams.get_sweep_iter();
  if (dmrginp.outputlevel() > 0) {
    mcheck("at the start of block and decimate");
    pout << "\t\t\t dot with system "<<dot_with_sys<<endl;
    pout <<endl<< "\t\t\t Performing Blocking"<<endl;
  }
  // figure out if we are going forward or backwards
  dmrginp.guessgenT -> start();
  bool forward = (system.get_sites() [0] == 0);
  SpinBlock systemDot;
  SpinBlock environment, environmentDot, newEnvironment;
  SpinBlock big;
  environment.nonactive_orb() = pb.orb();
  newEnvironment.nonactive_orb() = pb.orb();
  int systemDotStart, systemDotEnd;
  int environmentDotStart, environmentDotEnd, environmentStart, environmentEnd;
  int systemDotSize = sweepParams.get_sys_add() - 1;
  int environmentDotSize = sweepParams.get_env_add() -1;
  if (forward)
  {
    systemDotStart = dmrginp.spinAdapted() ? *system.get_sites().rbegin () + 1 : (*system.get_sites().rbegin ())/2 + 1 ;
    systemDotEnd = systemDotStart + systemDotSize;
    environmentDotStart = systemDotEnd + 1;
    environmentDotEnd = environmentDotStart + environmentDotSize;
  }
  else
  {
    systemDotStart = dmrginp.spinAdapted() ? system.get_sites()[0] - 1 : (system.get_sites()[0])/2 - 1 ;
    systemDotEnd = systemDotStart - systemDotSize;
    environmentDotStart = systemDotEnd - 1;
    environmentDotEnd = environmentDotStart - environmentDotSize;
  }
  systemDot = SpinBlock(systemDotStart, systemDotEnd, pb.orb());
  environmentDot = SpinBlock(environmentDotStart, environmentDotEnd, pb.orb());

  Sweep::makeSystemEnvironmentBigBlocks(system, systemDot, newSystem, environment, environmentDot, newEnvironment, big, sweepParams, dot_with_sys, useSlater, system.get_integralIndex(), pb.wavenumber(), baseState,pb.braquanta,pb.ketquanta);


  //analyse_operator_distribution(big);
  dmrginp.guessgenT -> stop();
  dmrginp.multiplierT -> start();
  std::vector<Matrix> rotatematrix;

  if (dmrginp.outputlevel() > 0)
    mcheck(""); 
  if (dmrginp.outputlevel() > 0) {
    if (!dot_with_sys && sweepParams.get_onedot())  { pout << "\t\t\t System  Block"<<system;    }
    else pout << "\t\t\t System  Block"<<newSystem;
    pout << "\t\t\t Environment Block"<<newEnvironment<<endl;
    pout << "\t\t\t Solving wavefunction "<<endl;
  }

  std::vector<Wavefunction> solution; solution.resize(1);
  std::vector<Wavefunction> outputState; outputState.resize(1);

  DiagonalMatrix e;


  //read the 0th wavefunction which we keep on the ket side because by default the ket stateinfo is used to initialize wavefunction
  //also when you use spinblock operators to multiply a state, it does so from the ket side i.e.  H|ket>
  //GuessWave::guess_wavefunctions(solution, e, big, sweepParams.set_guesstype(), sweepParams.get_onedot(), dot_with_sys, 0.0, baseState); 
  GuessWave::guess_wavefunctions(solution[0], e, big, sweepParams.set_guesstype(), sweepParams.get_onedot(), baseState, dot_with_sys, 0.0); 

#ifndef SERIAL
  mpi::communicator world;
  broadcast(world, solution, 0);
#endif
  
  outputState[0].AllowQuantaFor(big.get_leftBlock()->get_braStateInfo(), big.get_rightBlock()->get_braStateInfo(),pb.braquanta);
  outputState[0].set_onedot(sweepParams.get_onedot());
  outputState[0].Clear();
  if (pb.type() == TwoPerturbType::Va)
    big.multiplyCDD_sum(solution[0],&(outputState[0]),MAX_THRD);
  if (pb.type() == TwoPerturbType::Vi)
    big.multiplyCCD_sum(solution[0],&(outputState[0]),MAX_THRD);

  //davidson_f(solution[0], outputState[0]);
  SpinBlock newbig;

  if (sweepParams.get_onedot() && !dot_with_sys)
  {
    InitBlocks::InitNewSystemBlock(system, systemDot, newSystem, baseState, pb.wavenumber(), systemDot.size(), dmrginp.direct(), system.get_integralIndex(), DISTRIBUTED_STORAGE, false, true,NO_PARTICLE_SPIN_NUMBER_CONSTRAINT,pb.braquanta,pb.ketquanta);
    InitBlocks::InitBigBlock(newSystem, environment, newbig,pb.braquanta,pb.ketquanta); 

    Wavefunction tempwave = outputState[0];
    GuessWave::onedot_shufflesysdot(big.get_braStateInfo(), newbig.get_braStateInfo(), outputState[0], tempwave);  
    outputState[0] = tempwave;

    tempwave = solution[0];
    GuessWave::onedot_shufflesysdot(big.get_ketStateInfo(), newbig.get_ketStateInfo(), solution[0], tempwave);  
    solution[0] = tempwave;

    big.get_rightBlock()->clear();
    big.clear();
  }
  else
    newbig = big;
  
//.........这里部分代码省略.........
开发者ID:matk86,项目名称:Block,代码行数:101,代码来源:type1.C


注:本文中的SpinBlock::multiplyCCD_sum方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。