C++ ShuttleGui::Id方法代码示例

void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.AddSpace(0, 5);

   S.StartHorizontalLay();
   {
      // Action choices
      wxArrayString processChoices;
      processChoices.Add(_("Truncate Detected Silence"));
      processChoices.Add(_("Compress Excess Silence"));

      S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
                                        mEffect->mProcessIndex,
                                        &processChoices);
      S.SetSizeHints(-1, -1);
   }
   S.EndHorizontalLay();


   S.StartStatic(_("Detect Silence"));
   {
      S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
      {
         // Threshold
         wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
         S.TieChoice(_("Level:"),
                     mEffect->mTruncDbChoiceIndex,
                     &choices);
         S.SetSizeHints(-1, -1);
         S.AddSpace(0); // 'choices' aleady includes units.

      // Ignored silence
         S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
                                                          mEffect->mInitialAllowedSilence,
                     12);
         S.AddUnits(wxT("seconds"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
   {
      // Truncation / Compression factor
      S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
                                                            mEffect->mTruncLongestAllowedSilence,
                                                            12);
      S.AddUnits(wxT("seconds"));

      S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
                                                   mEffect->mSilenceCompressPercent,
                                                   12);
      S.AddUnits(wxT("percent"));
   }
   S.EndMultiColumn();

   // Warnings
   pWarning = S.AddVariableText( wxT("") );
   UpdateUI();
}

void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(12, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Dominic Mazzoni"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   // Amplitude
   S.StartMultiColumn(2, wxCENTER);
   {
      mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
                                           wxT(""),
                                           12);
      mAmpT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Amplitude
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
                                            0,
                                            AMP_MAX,
                                            AMP_MIN);
      mAmpS->SetName(_("Amplification (dB)"));
   }
   S.EndHorizontalLay();

   // Peek
   S.StartMultiColumn(2, wxCENTER);
   {
      mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
                                             wxT(""),
                                             12);
      // mPeakT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Clipping
   S.StartHorizontalLay(wxCENTER);
   {
      mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
                                                 wxT("false"));
   }
   S.EndHorizontalLay();

   return;
}

void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
   // dialog will be passed values from effect
   // Effect retrieves values from saved config
   // Dialog will take care of using them to initialize controls
   // If there is a selection, use that duration, otherwise use
   // value from saved config: this is useful is user wants to
   // replace selection with dtmf sequence

   S.AddSpace(0, 5);
   S.StartMultiColumn(2, wxCENTER);
   {
      wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
      vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
      mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfSequenceT->SetValidator(vldDtmf);

      FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
      vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
      S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);

      S.AddPrompt(_("Duration:"));
      mDtmfDurationT = safenew
         NumericTextCtrl(NumericConverter::TIME,
                         S.GetParent(),
                         ID_Duration,
                         GetDurationFormat(),
                         GetDuration(),
                         mProjectRate,
                         wxDefaultPosition,
                         wxDefaultSize,
                         true);
      mDtmfDurationT->SetName(_("Duration"));
      mDtmfDurationT->EnableMenu();
      S.AddWindow(mDtmfDurationT);

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
                                                     dtmfDutyCycle * SCL_DutyCycle,
                                                     MAX_DutyCycle * SCL_DutyCycle, 
                                                     MIN_DutyCycle * SCL_DutyCycle);
      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
      
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);

      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
   }
   S.EndMultiColumn();
}

void WahwahDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_NUMERIC);

   S.SetBorder(5);
   S.AddSpace(0, 5);

   S.StartMultiColumn(3, wxCENTER);
   {
      wxSlider *s;
      wxTextCtrl * tempTC;
      tempTC = S.Id(ID_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
      s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
      s->SetName(_("LFO start phase in degrees"));
      s->SetLineSize(10);
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_DEPTHTEXT).AddTextBox(_("Depth (%):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
      s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_RESONANCETEXT).AddTextBox(_("Resonance:"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_RESONANCESLIDER).AddSlider(wxT(""), 0, RES_MAX, RES_MIN);
      s->SetName(_("Resonance"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_FREQOFFTEXT).AddTextBox(_("Wah Frequency Offset (%):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s  =S.Id(ID_FREQOFFSLIDER).AddSlider(wxT(""), 0, FREQOFF_MAX, FREQOFF_MIN);
      s->SetName(_("Wah frequency offset in percent"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif
   }
   S.EndMultiColumn();
}

void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
   wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
   vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));

   S.AddTitle(_("by Salvo Ventura"));

   S.StartMultiColumn(2, wxEXPAND);
   {
      mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfStringT->SetValidator(vldDtmf);

      // The added colon to improve visual consistency was placed outside 
      // the translatable strings to avoid breaking translations close to 2.0. 
      // TODO: Make colon part of the translatable string after 2.0.
      S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")),  dAmplitude, 10);

      S.AddPrompt(_("Duration:"));
      if (mDtmfDurationT == NULL)
      {
         mDtmfDurationT = new
            TimeTextCtrl(this,
                         ID_DTMF_DURATION_TEXT,
                         wxT(""),
                         dDuration,
                         mEffect->mProjectRate,
                         wxDefaultPosition,
                         wxDefaultSize,
                         true);
         /* use this instead of "seconds" because if a selection is passed to the
         * effect, I want it (dDuration) to be used as the duration, and with
         * "seconds" this does not always work properly. For example, it rounds
         * down to zero... */
         mDtmfDurationT->SetName(_("Duration"));
         mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
         mDtmfDurationT->EnableMenu();
      }
      S.AddWindow(mDtmfDurationT);

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);

      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"),  (int) dTone * 1000), false);
      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
   }
   S.EndMultiColumn();
}

void ChangeSpeedDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Speed, affecting both Tempo and Pitch") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) +
                 _("using SampleRate, by Erik de Castro Lopo"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      mpTextCtrl_PercentChange = 
         S.Id(ID_TEXT_PERCENTCHANGE).AddTextBox(_("Percent Change:"), wxT(""), 12);
      wxTextValidator validator(wxFILTER_NUMERIC);
      mpTextCtrl_PercentChange->SetValidator(validator);
   }
   S.EndMultiColumn();

   //
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mpSlider_PercentChange = 
         S.Id(ID_SLIDER_PERCENTCHANGE).AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
      mpSlider_PercentChange->SetName(_("Percent Change"));
   }
   S.EndHorizontalLay();

   // 
   S.StartMultiColumn(5, wxCENTER);
   {
      S.AddUnits(_("Standard Vinyl RPM:"));

      wxArrayString rpmStrings;
      rpmStrings.Add(wxT("33 1/3"));
      rpmStrings.Add(wxT("45"));
      rpmStrings.Add(wxT("78"));
      /* i18n-hint: n/a is an English abbreviation meaning "not applicable". */
      rpmStrings.Add(_("n/a"));

      mpChoice_FromVinyl = 
         S.Id(ID_CHOICE_FROMVINYL).AddChoice(_("from"), wxT(""), &rpmStrings);
      mpChoice_FromVinyl->SetName(_("From RPM"));
      mpChoice_FromVinyl->SetSizeHints(100, -1);

      mpChoice_ToVinyl = 
         S.Id(ID_CHOICE_TOVINYL).AddChoice(_("to"), wxT(""), &rpmStrings);
      mpChoice_ToVinyl->SetName(_("To RPM"));
      mpChoice_ToVinyl->SetSizeHints(100, -1);
   }
   S.EndMultiColumn();
}

void ClickRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(10, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Click and Pop Removal by Craig DeForest"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartMultiColumn(3, wxEXPAND);
   S.SetStretchyCol(2);
   {
      // Threshold
      mThreshT = S.Id(ID_THRESH_TEXT).AddTextBox(_("Select threshold (lower is more sensitive):"),
                                                  wxT(""),
                                                  10);
      mThreshT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mThreshS = S.Id(ID_THRESH_SLIDER).AddSlider(wxT(""),
                                                  0,
                                                  MAX_THRESHOLD);
      mThreshS->SetName(_("Select threshold"));
      mThreshS->SetRange(MIN_THRESHOLD, MAX_THRESHOLD);
#if defined(__WXGTK__)
      // Force a minimum size since wxGTK allows it to go to zero
      mThreshS->SetMinSize(wxSize(100, -1));
#endif

      // Click width
      mWidthT = S.Id(ID_WIDTH_TEXT).AddTextBox(_("Max spike width (higher is more sensitive):"),
                                               wxT(""),
                                               10);
      mWidthT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mWidthS = S.Id(ID_WIDTH_SLIDER).AddSlider(wxT(""),
                                                0,
                                                MAX_CLICK_WIDTH);
      mWidthS->SetName(_("Max spike width"));
      mWidthS->SetRange(MIN_CLICK_WIDTH, MAX_CLICK_WIDTH);
#if defined(__WXGTK__)
      // Force a minimum size since wxGTK allows it to go to zero
      mWidthS->SetMinSize(wxSize(100, -1));
#endif
   }
   S.EndMultiColumn();
   return;
}

void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
   wxArrayString empty;

   S.SetBorder(2);

   S.StartStatic(_("Interface"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(HostID);
         mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
                             wxT("/MidiIO/Host"), 
                             wxT(""),
                             mHostNames,
                             mHostLabels);
         S.SetSizeHints(mHostNames);

         S.AddPrompt(_("Using:"));
         S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
      }
      S.EndMultiColumn();
   }                              
   S.EndStatic();

   S.StartStatic(_("Playback"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(PlayID);
         mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
                             wxEmptyString,
                             &empty);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Recording"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(RecordID);
         mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
                               wxEmptyString,
                               &empty);

         S.Id(ChannelsID);
         /*
         mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
                                 wxEmptyString,
                                 &empty);
         */
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
}

void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      S.StartMultiColumn(4, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
         mCommand->SetEditable(false);
         mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
         mEditParams->Enable(false); // disable button as box is empty
         mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
         mUsePreset->Enable(false); // disable button as box is empty
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
         mParameters->SetEditable(false);
         wxString prompt{_("&Details")};
         S.Prop(0).AddPrompt(prompt);
         mDetails = S.AddTextWindow( wxT(""));
         mDetails->SetEditable(false);
         mDetails->SetName(wxStripMenuCodes(prompt));
      }
      S.EndMultiColumn();

      S.Prop(10).StartStatic(_("Choose command"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
         mChoices = S.Id(CommandsListID).AddListControl();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);

   PopulateCommandList();
   if (mChoices->GetItemCount() > 0) {
      // set first item to be selected (and the focus when the
      // list first becomes the focus)
      mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
         wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
   }

   SetMinSize(wxSize(780, 560));
   Fit();
   Center();
}

/// Defines the dialog and does data exchange with it.
void BatchProcessDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      /*i18n-hint: A chain is a sequence of commands that can be applied
       * to one or more audio files.*/
      S.StartStatic(_("&Select Chain"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
                     wxLC_SINGLE_SEL);
         mChains = S.Id(ChainsListID).AddListControlReportMode();
         mChains->InsertColumn(0, _("Chain"), wxLIST_FORMAT_LEFT);
      }
      S.EndStatic();

      S.StartHorizontalLay(wxALIGN_RIGHT, false);
      {
         S.SetBorder(10);
         S.Id(ApplyToProjectID).AddButton(_("Apply to Current &Project"));
         S.Id(ApplyToFilesID).AddButton(_("Apply to &Files..."));
         S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   wxArrayString names = mBatchCommands.GetNames();
   for (int i = 0; i < (int)names.GetCount(); i++) {
      mChains->InsertItem(i, names[i]);
   }

   // Get and validate the currently active chain
   wxString name = gPrefs->Read(wxT("/Batch/ActiveChain"), wxT(""));

   int item = mChains->FindItem(-1, name);
   if (item == -1) {
      item = 0;
      name = mChains->GetItemText(0);
   }

   // Select the name in the list...this will fire an event.
   mChains->SetItemState(item, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);

   Layout();
   Fit();
   SetSizeHints(GetSize());
   Center();

   // Set the column size for the chains list.
   wxSize sz = mChains->GetClientSize();
   mChains->SetColumnWidth(0, sz.x);
}

void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
   wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
   vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));

   S.AddTitle(_("by Salvo Ventura (2006)"));

   S.StartMultiColumn(2, wxEXPAND);
   {
      mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfStringT->SetValidator(vldDtmf);

      S.AddPrompt(_("DTMF duration:"));
      mDtmfDurationT = new
         TimeTextCtrl(this,
                      ID_DTMF_DURATION_TEXT,
                      /*
                      use this instead of "seconds" because if a selection is passed to the effect,
                      I want it (dDuration) to be used as the duration, and with "seconds" this does
                      not always work properly. For example, it rounds down to zero...
                      */
                      TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
                      dDuration,
                      44100,
                      wxDefaultPosition,
                      wxDefaultSize,
                      true);
      S.AddWindow(mDtmfDurationT);
      mDtmfDurationT->EnableMenu();

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
      mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);

      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"),  (int) dTone * 1000), false);
      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
   }
   S.EndMultiColumn();
}

void BassBoostDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(10, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Nasca Octavian Paul"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartMultiColumn(3, wxEXPAND);
   S.SetStretchyCol(2);
   {
      // Frequency
      mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Frequency (Hz):"),
                                             wxT(""),
                                             10);
      mFreqT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""),
                                              0,
                                              FREQ_MAX);
      mFreqS->SetName(_("Frequency Hertz"));
      mFreqS->SetRange(FREQ_MIN, FREQ_MAX);

      // Boost
      mBoostT = S.Id(ID_BOOST_TEXT).AddTextBox(_("Boost (dB):"),
                                               wxT(""),
                                               10);
      mBoostT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mBoostS = S.Id(ID_BOOST_SLIDER).AddSlider(wxT(""),
                                                0,
                                                BOOST_MAX);
      mBoostS->SetName(_("Boost dB"));
      mBoostS->SetRange(BOOST_MIN, BOOST_MAX);
   }
   S.EndMultiColumn();
   return;
}

void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_NUMERIC);

   S.AddSpace(0, 5);

   // Amplitude
   S.StartMultiColumn(2, wxCENTER);
   {
      mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
                                           wxT(""),
                                           12);
      mAmpT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Amplitude
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
                                            0,
                                            AMP_MAX,
                                            AMP_MIN);
      mAmpS->SetName(_("Amplification dB"));
   }
   S.EndHorizontalLay();

   // Peek
   S.StartMultiColumn(2, wxCENTER);
   {
      mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
                                             wxT(""),
                                             12);
      mPeakT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Clipping
   S.StartHorizontalLay(wxCENTER);
   {
      mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
                                                 wxT("false"));
   }
   S.EndHorizontalLay();

   return;
}

void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Lynn Allan"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartThreeColumn();
   {
      wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());

      S.Id( ID_LONGEST_SILENCE_TEXT ).TieTextBox(_("Max silence duration:"),
                   mEffect->mTruncLongestAllowedSilentMs,
                   10);
      S.AddUnits( _("milliseconds") );
      //S.AddUnits(_("(9999999 or greater is off)"));
      S.TieChoice(_("Threshold for silence:"),
                  mEffect->mTruncDbChoiceIndex,
                  &choices);
   }
   S.EndTwoColumn();
   pWarning = S.AddVariableText( wxT("") );
}

void RepeatDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(12, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Dominic Mazzoni && Vaughan Johnson"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      mRepeatCount = S.Id(ID_REPEAT_TEXT).AddTextBox(_("Number of times to repeat:"),
                                                     wxT(""),
                                                     12);
      mRepeatCount->SetValidator(vld);
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, true);
   {
      mTotalTime = S.AddVariableText(_("New selection length: hh:mm:ss"));
   }
   S.EndHorizontalLay();
}