C++ ShuttleGui::EndRadioButtonGroup方法代码示例

void ProjectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);

   S.StartStatic(_("When saving a project that depends on other audio files"));
   {
      S.StartRadioButtonGroup(wxT("/FileFormats/SaveProjectWithDependencies"), wxT("ask"));
      {
         S.TieRadioButton(_("&Always copy all audio into project (safest)"),
                          wxT("copy"));
         S.TieRadioButton(_("Do &not copy any audio"),
                          wxT("never"));
         S.TieRadioButton(_("As&k user"),
                          wxT("ask"));
      }
      S.EndRadioButtonGroup();
   }
   S.EndStatic();
}

/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);

   S.StartStatic(_("Key Bindings"), 1);
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(1);

         S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
         {
            S.AddTitle(_("View by:"));
            S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
            {
               mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
               mViewByTree->SetName(_("View by tree"));
               mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
               mViewByName->SetName(_("View by name"));
               mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
               mViewByKey->SetName(_("View by key"));
            }
            S.EndRadioButtonGroup();
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
         {
            // just a spacer
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
         {
            mFilterLabel = S.AddVariableText(_("Searc&h:"));

            if (!mFilter) {
               mFilter = safenew wxTextCtrl(this,
                                        FilterID,
                                        wxT(""),
                                        wxDefaultPosition,
#if defined(__WXMAC__)
                                        wxSize(300, -1),
#else
                                        wxSize(210, -1),
#endif
                                        wxTE_PROCESS_ENTER);
               mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
               mFilter->Connect(wxEVT_KEY_DOWN,
                                wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
                                NULL,
                                this);
               mFilter->Connect(wxEVT_CHAR,
                                wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
                                NULL,
                                this);
            }
            S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
         }
         S.EndHorizontalLay();
      }
      S.EndThreeColumn();
      S.AddSpace(-1, 2);

      S.StartHorizontalLay(wxEXPAND, 1);
      {
         if (!mView) {
            mView = safenew KeyView(this, CommandsListID);
            mView->SetName(_("Bindings"));
         }
         S.Prop(true);
         S.AddWindow(mView, wxEXPAND);
      }
      S.EndHorizontalLay();

      S.StartThreeColumn();
      {
         if (!mKey) {
            mKey = safenew wxTextCtrl(this,
                                  CurrentComboID,
                                  wxT(""),
                                  wxDefaultPosition,
#if defined(__WXMAC__)
                                  wxSize(300, -1),
#else
                                  wxSize(210, -1),
#endif
                                  wxTE_PROCESS_ENTER);

            mKey->SetName(_("Short cut"));
            mKey->Connect(wxEVT_KEY_DOWN,
                          wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
                          NULL,
                          this);
            mKey->Connect(wxEVT_CHAR,
                          wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
//.........这里部分代码省略.........

void SpectrumPrefs::PopulateOrExchange( ShuttleGui & S )
{
   wxArrayString windowTypeList;

   for(int i=0; i<NumWindowFuncs(); i++)
      windowTypeList.Add(WindowFuncName(i));

   S.SetBorder( 2 );
   S.StartHorizontalLay(wxEXPAND, 0 );
   S.StartStatic( _("FFT Size"), 0 );
   {
      S.StartRadioButtonGroup( wxT("/Spectrum/FFTSize"), 256 );
      S.TieRadioButton( _("8 - most wideband"),     8);
      S.TieRadioButton( wxT("16"),                  16);
      S.TieRadioButton( wxT("32"),                  32);
      S.TieRadioButton( wxT("64"),                  64);
      S.TieRadioButton( wxT("128"),                 128);
      S.TieRadioButton( _("256 - default"),         256);
      S.TieRadioButton( wxT("512"),                 512);
      S.TieRadioButton( wxT("1024"),                1024);
      S.TieRadioButton( wxT("2048"),                2048);
#ifdef EXPERIMENTAL_FIND_NOTES
      S.TieRadioButton( wxT("4096"),                4096);
      S.TieRadioButton( wxT("8192"),                8192);
      S.TieRadioButton( wxT("16384"),               16384);
      S.TieRadioButton( _("32768 - most narrowband"),32768);
#else
      S.TieRadioButton( _("4096 - most narrowband"),4096);
#endif //LOGARITHMIC_SPECTRUM
      S.EndRadioButtonGroup();

      // add choice for windowtype
      S.StartMultiColumn(2, wxCENTER);
      {
         S.TieChoice( _("Window type:"), windowType,  &windowTypeList);
         S.SetSizeHints(-1,-1);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

#ifdef EXPERIMENTAL_FFT_SKIP_POINTS
   S.StartHorizontalLay(wxEXPAND, 0 );
   S.StartStatic( _("FFT Skip Points"), 0 );
   {
      S.StartRadioButtonGroup(wxT("/Spectrum/FFTSkipPoints"), 0);
      S.TieRadioButton(wxT("0"), 0);
      S.TieRadioButton(wxT("1"), 1);
      S.TieRadioButton(wxT("3"), 3);
      S.TieRadioButton(wxT("7"), 7);
      S.TieRadioButton(wxT("15"), 15);
      S.TieRadioButton(wxT("31"), 31);
      S.TieRadioButton(wxT("63"), 63);
      S.EndRadioButtonGroup();
   }
   S.EndStatic();
#endif //EXPERIMENTAL_FFT_SKIP_POINTS

   S.StartStatic( _("Display"),1 );
   {
      // JC: For layout of mixtures of controls I prefer checkboxes on the right,
      // with everything in two columns over what we have here.
      S.TieCheckBox( _("&Grayscale"), wxT("/Spectrum/Grayscale"), false);
      S.StartTwoColumn(); // 2 cols because we have a control with a separate label.
      S.Id(ID_MINFREQUENCY).TieTextBox(
         _("Minimum Frequency (Hz):"), // prompt
         minFreqStr, // String to exchange with
         12 // max number of characters (used to size the control).
         );
      S.Id(ID_MAXFREQUENCY).TieTextBox(
         _("Maximum Frequency (Hz):"), // prompt
         maxFreqStr, // String to exchange with
         12 // max number of characters (used to size the control).
         );
      S.EndTwoColumn();
#ifdef EXPERIMENTAL_FFT_Y_GRID
      S.TieCheckBox( _("&Y-Grid"), wxT("/Spectrum/FFTYGrid"), false);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
      S.TieCheckBox( _("&Find Notes"), wxT("/Spectrum/FFTFindNotes"), false);
      S.TieCheckBox( _("&Quantize Notes"), wxT("/Spectrum/FindNotesQuantize"), false);
      S.StartTwoColumn(); // 2 cols because we have a control with a separate label.
      S.Id(ID_FIND_NOTES_MIN_A).TieTextBox(
         _("Minimum Amplitude (dB):"), // prompt
         findNotesMinAStr, // String to exchange with
         8 // max number of characters (used to size the control).
         );
      S.Id(ID_FIND_NOTES_N).TieTextBox(
         _("Max. Number of Notes (1..128):"), // prompt
         findNotesNStr, // String to exchange with
         8 // max number of characters (used to size the control).
         );
      S.EndTwoColumn();
#endif //EXPERIMENTAL_FIND_NOTES
   }
   S.EndStatic();
   S.EndHorizontalLay();
}