C++ ShuttleGui::AddStandardButtons方法代码示例

void ExportFFmpegWMAOptions::PopulateOrExchange(ShuttleGui & S)
{
   S.StartHorizontalLay(wxEXPAND, 0);
   {
      S.StartStatic(_("WMA Export Setup"), 0);
      {
         S.StartTwoColumn();
         {
            S.TieChoice(_("Bit Rate:"), wxT("/FileFormats/WMABitRate"), 
               180189, mBitRateNames, mBitRateLabels);
         }
         S.EndTwoColumn();
      }
      S.EndStatic();
   }
   S.EndHorizontalLay();

   S.AddStandardButtons();

   Layout();
   Fit();
   SetMinSize(GetSize());
   Center();

   return;
}

void TimeDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.SetBorder(5);
   S.StartVerticalLay(true);
   {
      S.StartStatic(mPrompt, true);
      {
         mTimeCtrl = new
            TimeTextCtrl(this,
                         wxID_ANY,
                         wxT(""),
                         mTime,
                         mRate,
                         wxDefaultPosition,
                         wxDefaultSize,
                         true);
         mTimeCtrl->SetName(mPrompt);
         mTimeCtrl->SetFormatString(mTimeCtrl->GetBuiltinFormat(mFormat));
         S.AddWindow(mTimeCtrl);
         mTimeCtrl->EnableMenu();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();
   S.AddStandardButtons();

   TransferDataToWindow();

   Layout();
   Fit();
   SetMinSize(GetSize());
   Center();
}

void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      S.StartMultiColumn(4, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
         mCommand->SetEditable(false);
         mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
         mEditParams->Enable(false); // disable button as box is empty
         mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
         mUsePreset->Enable(false); // disable button as box is empty
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
         mParameters->SetEditable(false);
         wxString prompt{_("&Details")};
         S.Prop(0).AddPrompt(prompt);
         mDetails = S.AddTextWindow( wxT(""));
         mDetails->SetEditable(false);
         mDetails->SetName(wxStripMenuCodes(prompt));
      }
      S.EndMultiColumn();

      S.Prop(10).StartStatic(_("Choose command"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
         mChoices = S.Id(CommandsListID).AddListControl();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);

   PopulateCommandList();
   if (mChoices->GetItemCount() > 0) {
      // set first item to be selected (and the focus when the
      // list first becomes the focus)
      mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
         wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
   }

   SetMinSize(wxSize(780, 560));
   Fit();
   Center();
}

void SoundActivatedRecord::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(5);
   int dBRange;

   S.StartVerticalLay();
   {
      S.StartMultiColumn(2, wxEXPAND);
         S.SetStretchyCol(1);
         dBRange = gPrefs->Read(ENV_DB_KEY, ENV_DB_RANGE);
         S.TieSlider(_("Activation level (dB):"), wxT("/AudioIO/SilenceLevel"), -50, 0, -dBRange);
      S.EndMultiColumn();
   }
   S.EndVerticalLay();
   S.AddStandardButtons();
}

   void PopulateOrExchange(ShuttleGui & S)
   {
      wxString text;

      S.SetBorder(10);
      S.StartVerticalLay(true);
      {
         text.Printf(_("Audacity needs the file '%s' to import and export audio via FFmpeg."), mName.c_str());
         S.AddTitle(text);

         S.SetBorder(3);
         S.StartHorizontalLay(wxALIGN_LEFT, true);
         {
            text.Printf(_("Location of '%s':"), mName.c_str());
            S.AddTitle(text);
         }
         S.EndHorizontalLay();

         S.StartMultiColumn(2, wxEXPAND);
         S.SetStretchyCol(0);
         {
            if (mLibPath.GetFullPath().IsEmpty()) {
               text.Printf(_("To find '%s', click here -->"), mName.c_str());
               mPathText = S.AddTextBox(wxT(""), text, 0);
            }
            else {
               mPathText = S.AddTextBox(wxT(""), mLibPath.GetFullPath(), 0);
            }
            S.Id(ID_FFMPEG_BROWSE).AddButton(_("Browse..."), wxALIGN_RIGHT);
            S.AddVariableText(_("To get a free copy of FFmpeg, click here -->"), true);
            S.Id(ID_FFMPEG_DLOAD).AddButton(_("Download"), wxALIGN_RIGHT);
         }
         S.EndMultiColumn();

         S.AddStandardButtons();
      }
      S.EndVerticalLay();

      Layout();
      Fit();
      SetMinSize(GetSize());
      Center();

      return;
   }

void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
         mCommand->SetEditable(false);
         mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
         mEditParams->Enable( false ); // disable button as box is empty
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
         mParameters->SetEditable(false);
      }
      S.EndMultiColumn();

      S.StartStatic(_("C&hoose command"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
         mChoices = S.Id(CommandsListID).AddListControl();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   S.AddStandardButtons();

   for(int i=0;i<99;i++)
   {
      mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
   }
   PopulateCommandList();

   SetSize(350, 400);
   SetSizeHints(GetSize());
   Center();
}

void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
   bool bShow;
   gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );

   S.StartVerticalLay();
   {
      S.StartHorizontalLay(wxALIGN_LEFT, 0);
      {
         S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
      }
      S.EndHorizontalLay();

      if (mGrid == NULL) {
         mGrid = safenew Grid(S.GetParent(),
                          wxID_ANY,
                          wxDefaultPosition,
                          wxDefaultSize,
                          wxSUNKEN_BORDER);

         mGrid->RegisterDataType(wxT("Combo"),
            (mStringRenderer = safenew wxGridCellStringRenderer),
            (mComboEditor = safenew ComboEditor(wxArrayString(), true)));

         mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());

         auto  cs = names();

         // Build the initial (empty) grid
         mGrid->CreateGrid(0, 2);
         mGrid->SetRowLabelSize(0);
         mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
         mGrid->SetColLabelValue(0, _("Tag"));
         mGrid->SetColLabelValue(1, _("Value"));

         // Resize the name column and set default row height.
         wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
         mGrid->SetColSize(0, tc.GetSize().x);
         mGrid->SetColMinimalWidth(0, tc.GetSize().x);
      }
      S.Prop(1);
      S.AddWindow(mGrid, wxEXPAND | wxALL);

      S.StartMultiColumn(4, wxALIGN_CENTER);
      {
         S.Id(AddID).AddButton(_("&Add"));
         S.Id(RemoveID).AddButton(_("&Remove"));
         S.AddTitle( {} );
         S.Id(ClearID).AddButton(_("Cl&ear"));
      }
      S.EndMultiColumn();

      S.StartHorizontalLay(wxALIGN_CENTRE, 0);
      {
         S.StartStatic(_("Genres"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(EditID).AddButton(_("E&dit..."));
               S.Id(ResetID).AddButton(_("Rese&t..."));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
         S.StartStatic(_("Template"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(LoadID).AddButton(_("&Load..."));
               S.Id(SaveID).AddButton(_("&Save..."));
               S.AddTitle( {} );
               S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
      }
      S.EndHorizontalLay();
      S.StartHorizontalLay(wxALIGN_LEFT, 0);
      {
         S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}

void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
   S.StartVerticalLay();
   {
      S.StartHorizontalLay(wxALIGN_LEFT, false);
      {
         S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
      }
      S.EndHorizontalLay();

      if (mGrid == NULL) {
         mGrid = new Grid(S.GetParent(),
                          wxID_ANY,
                          wxDefaultPosition,
                          wxDefaultSize,
                          wxSUNKEN_BORDER);

         mStringRenderer = new wxGridCellStringRenderer;
         mComboEditor = new ComboEditor(wxArrayString(), true);

         mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);

         mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());

         wxArrayString cs(WXSIZEOF(names), names);

         // Build the initial (empty) grid
         mGrid->CreateGrid(0, 2); 
         mGrid->SetRowLabelSize(0);
         mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
         mGrid->SetColLabelValue(0, _("Tag"));
         mGrid->SetColLabelValue(1, _("Value"));

         // Resize the name column and set default row height.
         wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
         mGrid->SetColSize(0, tc.GetSize().x);
         mGrid->SetColMinimalWidth(0, tc.GetSize().x);
      }
      S.Prop(true);
      S.AddWindow(mGrid, wxEXPAND | wxALL);

      S.StartMultiColumn(4, wxALIGN_CENTER);
      {
         S.Id(AddID).AddButton(_("&Add"));
         S.Id(RemoveID).AddButton(_("&Remove"));
         S.AddTitle(wxT(" "));
         S.Id(ClearID).AddButton(_("Cl&ear"));
      }
      S.EndMultiColumn();

      S.StartHorizontalLay(wxALIGN_CENTRE, false);
      {
         S.StartStatic(_("Genres"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(EditID).AddButton(_("E&dit..."));
               S.Id(ResetID).AddButton(_("Rese&t..."));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
         S.StartStatic(_("Template"));
         {
            S.StartMultiColumn(4, wxALIGN_CENTER);
            {
               S.Id(LoadID).AddButton(_("&Load..."));
               S.Id(SaveID).AddButton(_("&Save..."));
               S.AddTitle(wxT(" "));
               S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   S.AddStandardButtons(eOkButton | eCancelButton);
}

void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
   S.SetBorder(5);
   S.StartVerticalLay(true);
   {
      /* i18n-hint: This string is used to configure the controls for times when the recording is
       * started and stopped. As such it is important that only the alphabetic parts of the string
       * are translated, with the numbers left exactly as they are.
       * The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
       * displayed is minutes, and the 's' indicates that the third number displayed is seconds.
       */
      wxString strFormat = _("099 h 060 m 060 s");
      S.StartStatic(_("Start Date and Time"), true);
      {
         m_pDatePickerCtrl_Start = 
            new wxDatePickerCtrl(this, // wxWindow *parent, 
                                 ID_DATEPICKER_START, // wxWindowID id, 
                                 m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime, 
                                 // const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
         m_pDatePickerCtrl_Start->SetName(_("Start Date"));
         m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
         S.AddWindow(m_pDatePickerCtrl_Start);

         m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START);
         m_pTimeTextCtrl_Start->SetName(_("Start Time"));
         m_pTimeTextCtrl_Start->SetFormatString(strFormat);
         m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
         S.AddWindow(m_pTimeTextCtrl_Start);
         m_pTimeTextCtrl_Start->EnableMenu(false);
      }
      S.EndStatic();

      S.StartStatic(_("End Date and Time"), true);
      {
         m_pDatePickerCtrl_End = 
            new wxDatePickerCtrl(this, // wxWindow *parent, 
                                 ID_DATEPICKER_END, // wxWindowID id, 
                                 m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime, 
                                 // const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
         m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
         m_pDatePickerCtrl_End->SetName(_("End Date"));
         S.AddWindow(m_pDatePickerCtrl_End);

         m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END);
         m_pTimeTextCtrl_End->SetName(_("End Time"));
         m_pTimeTextCtrl_End->SetFormatString(strFormat);
         m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
         S.AddWindow(m_pTimeTextCtrl_End);
         m_pTimeTextCtrl_End->EnableMenu(false);
      }
      S.EndStatic();

      S.StartStatic(_("Duration"), true);
      {
         /* i18n-hint: This string is used to configure the controls which shows the recording
          * duration. As such it is important that only the alphabetic parts of the string
          * are translated, with the numbers left exactly as they are.
          * The string 'days' indicates that the first number in the control will be the number of days,
          * then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
          * number displayed is minutes, and the 's' indicates that the fourth number displayed is
          * seconds.
          */
         wxString strFormat1 = _("099 days 024 h 060 m 060 s");
         m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION);
         m_pTimeTextCtrl_Duration->SetName(_("Duration"));
         m_pTimeTextCtrl_Duration->SetFormatString(strFormat1);
         m_pTimeTextCtrl_Duration->SetTimeValue(m_TimeSpan_Duration.GetSeconds().ToDouble());
         S.AddWindow(m_pTimeTextCtrl_Duration);
         m_pTimeTextCtrl_Duration->EnableMenu(false);
      }
      S.EndStatic();
   }
   S.EndVerticalLay();
   
   S.AddStandardButtons();

   Layout();
   Fit();
   SetMinSize(GetSize());
   Center();
}

/// Defines the dialog and does data exchange with it.
void EditChainsDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.StartHorizontalLay(wxEXPAND, 1);
   {
      S.StartStatic(_("&Chains"));
      {
         // JKC: Experimenting with an alternative way to get multiline
         // translated strings to work correctly without very long lines.
         // My appologies Alexandre if this way didn't work either.
         //
         // With this method:
         //   1) it compiles fine under windows unicode and normal mode.
         //   2) xgettext source code has handling for the trailing '\'
         //
         // It remains to see if linux and mac can cope and if xgettext
         // actually does do fine with strings presented like this.
         // If it doesn't work out, revert to all-on-one-line.
         S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_SINGLE_SEL |
                    wxLC_EDIT_LABELS);
         mChains = S.Id(ChainsListID).AddListControlReportMode();
         mChains->InsertColumn(0, wxT("Chain"), wxLIST_FORMAT_LEFT);
         S.StartHorizontalLay(wxCENTER, false);
         {
            S.Id(AddButtonID).AddButton(_("&Add"));
            mRemove = S.Id(RemoveButtonID).AddButton(_("&Remove"));
            mRename = S.Id(RenameButtonID).AddButton(_("Re&name"));
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();

      S.StartStatic(_("C&hain (Double-Click or press SPACE to edit)"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
                    wxLC_SINGLE_SEL);
         mList = S.Id(CommandsListID).AddListControlReportMode();

         //An empty first column is a workaround - under Win98 the first column
         //can't be right aligned.
         mList->InsertColumn(BlankColumn, wxT(""), wxLIST_FORMAT_LEFT);
         /* i18n-hint: This is the number of the command in the list */
         mList->InsertColumn(ItemNumberColumn, _("Num"), wxLIST_FORMAT_RIGHT);
         mList->InsertColumn(ActionColumn, _("Command  "), wxLIST_FORMAT_RIGHT);
         mList->InsertColumn(ParamsColumn, _("Parameters"), wxLIST_FORMAT_LEFT);

         S.StartHorizontalLay(wxCENTER, false);
         {
            S.Id(InsertButtonID).AddButton(_("&Insert"), wxALIGN_LEFT);
            S.Id(DeleteButtonID).AddButton(_("De&lete"), wxALIGN_LEFT);
            S.Id(UpButtonID).AddButton(_("Move &Up"), wxALIGN_LEFT);
            S.Id(DownButtonID).AddButton(_("Move &Down"), wxALIGN_LEFT);
            mDefaults = S.Id(DefaultsButtonID).AddButton(_("De&faults"));
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();
   }
   S.EndHorizontalLay();

   S.AddStandardButtons();

   return;
}

void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
   S.SetBorder(5);
   S.StartVerticalLay(true);
   {
      wxString strFormat = wxT("099 h 060 m 060 s");
      S.StartStatic(_("Start Date and Time"), true);
      {
         m_pDatePickerCtrl_Start = 
            new wxDatePickerCtrl(this, // wxWindow *parent, 
                                 ID_DATEPICKER_START, // wxWindowID id, 
                                 m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime, 
                                 // const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
         m_pDatePickerCtrl_Start->SetName(_("Start Date"));
         m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
         S.AddWindow(m_pDatePickerCtrl_Start);

         m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START, strFormat);
         m_pTimeTextCtrl_Start->SetName(_("Start Time"));
         m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
         S.AddWindow(m_pTimeTextCtrl_Start);
         m_pTimeTextCtrl_Start->EnableMenu(false);
      }
      S.EndStatic();

      S.StartStatic(_("End Date and Time"), true);
      {
         m_pDatePickerCtrl_End = 
            new wxDatePickerCtrl(this, // wxWindow *parent, 
                                 ID_DATEPICKER_END, // wxWindowID id, 
                                 m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime, 
                                 // const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
         m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
         m_pDatePickerCtrl_End->SetName(_("End Date"));
         S.AddWindow(m_pDatePickerCtrl_End);

         m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END, strFormat);
         m_pTimeTextCtrl_End->SetName(_("End Time"));
         m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
         S.AddWindow(m_pTimeTextCtrl_End);
         m_pTimeTextCtrl_End->EnableMenu(false);
      }
      S.EndStatic();

      S.StartStatic(_("Duration"), true);
      {
         wxString strFormat1 = wxT("099 days 024 h 060 m 060 s");
         m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION, strFormat1);
         m_pTimeTextCtrl_Duration->SetName(_("Duration"));
         m_pTimeTextCtrl_Duration->SetTimeValue(
            Internat::CompatibleToDouble(m_TimeSpan_Duration.GetSeconds().ToString())); //v milliseconds?
         S.AddWindow(m_pTimeTextCtrl_Duration);
         m_pTimeTextCtrl_Duration->EnableMenu(false);
      }
      S.EndStatic();
   }
   S.EndVerticalLay();
   
   S.AddStandardButtons();

   Layout();
   Fit();
   SetMinSize(GetSize());
   Center();
}

//.........这里部分代码省略.........
                     64);
      S.Id(ChooseID).AddButton(_("Choose..."));
      S.Id(CreateID).AddButton(_("Create"));
   }
   S.EndMultiColumn();

   S.StartHorizontalLay(wxEXPAND, true);
   {
      S.SetBorder(5);
      S.StartStatic(_("Split files based on:"), true);
      {
         S.StartMultiColumn(2, false);
         S.SetStretchyCol(1);
         {
            // Row 1
            S.SetBorder(1);
            mLabel = S.Id(LabelID)
               .AddRadioButton(wxT(""));
            S.SetBorder(3);
            mLabelLabel = S.AddVariableText(_("Labels"), false);

            // Row 2
            S.AddVariableText(wxT(""), false);
            mFirst = S.Id(FirstID)
               .AddCheckBox(_("Include audio before first label"), wxT("false"));

            // Row 3
            S.AddVariableText(wxT(""), false);
            S.StartHorizontalLay(wxEXPAND, false);
            {
               mFirstFileLabel = S.AddVariableText(_("First file name:"), true);
               mFirstFileName = S.Id(FirstFileNameID)
                  .TieTextBox(wxT(""),
                              name,
                              30);
            }
            S.EndHorizontalLay();

            // Row 4
            S.SetBorder(1);
            mTrack = S.Id(TrackID)
               .AddRadioButtonToGroup(wxT(""));
            S.SetBorder(3);
            mTrackLabel = S.AddVariableText(_("Tracks"), false);
         }
         S.EndMultiColumn();
      }
      S.EndStatic();

      S.SetBorder(5);
      S.StartStatic(_("Name files:"), false);
      {
         S.StartMultiColumn(2, false);
         S.SetStretchyCol(1);
         {
            // Row 1
            S.SetBorder(1);
            mByName = S.Id(ByNameID)
               .AddRadioButton(wxT(""));
            S.SetBorder(3);
            mByNameLabel = S.AddVariableText(_("Using Label/Track Name"), false);

            // Row 2
            S.SetBorder(1);
            mByNumber = S.Id(ByNumberID)
               .AddRadioButtonToGroup(wxT(""));
            S.SetBorder(3);
            mByNumberLabel = S.AddVariableText(_("Numbering consecutively"), false);

            // Row 3
            S.AddVariableText(wxT(""), false);
            S.StartHorizontalLay(wxEXPAND, false);
            {
               mPrefixLabel = S.AddVariableText(_("File name prefix:"), true);
               mPrefix = S.Id(PrefixID)
                  .TieTextBox(wxT(""),
                              name,
                              30);
            }
            S.EndHorizontalLay();
         }
         S.EndMultiColumn();
      }
      S.EndStatic();
   }
   S.EndHorizontalLay();

   S.SetBorder(5);
   S.StartHorizontalLay(wxEXPAND, false);
   {
      mOverwrite = S.Id(OverwriteID)
         .AddCheckBox(_("Overwrite existing files"), wxT("true"));
   }
   S.EndHorizontalLay();

   S.AddStandardButtons();
   mExport = (wxButton *)wxWindow::FindWindowById(wxID_OK, this);
   mExport->SetLabel(_("E&xport"));

}

//.........这里部分代码省略.........
            * The string 'days' indicates that the first number in the control will be the number of days,
            * then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
            * number displayed is minutes, and the 's' indicates that the fourth number displayed is
            * seconds.
            */
            wxString strFormat1 = _("099 days 024 h 060 m 060 s");
            m_pTimeTextCtrl_Duration = safenew NumericTextCtrl(
               this, ID_TIMETEXT_DURATION, NumericConverter::TIME,
               wxEmptyString, 0, 44100,
               Options{}
                  .MenuEnabled(false)
                  .Format(strFormat1)
                  .Value(true, m_TimeSpan_Duration.GetSeconds().ToDouble()));
            m_pTimeTextCtrl_Duration->SetName(_("Duration"));
            S.AddWindow(m_pTimeTextCtrl_Duration);
         }
         S.EndStatic();
      }
      S.EndVerticalLay();

      S.StartVerticalLay(true);
      {
         S.StartStatic(_("Automatic Save"), true);
         {
            // If checked, the project will be saved when the recording is completed
            m_pTimerAutoSaveCheckBoxCtrl = S.Id(ID_AUTOSAVE_CHECKBOX).AddCheckBox(_("Enable &Automatic Save?"),
                                                                                    (bAutoSave ? "true" : "false"));
            S.StartMultiColumn(3, wxEXPAND);
            {
               wxString sInitialValue = wxT("");
               AudacityProject* pProject = GetActiveProject();
               wxString sSaveValue = pProject->GetFileName();
               if (sSaveValue != wxEmptyString) {
                  m_fnAutoSaveFile.Assign(sSaveValue);
                  sInitialValue = _("Current Project");
               }
               S.AddPrompt(_("Save Project As:"));
               m_pTimerSavePathTextCtrl = NewPathControl(this, ID_AUTOSAVEPATH_TEXT, _("Save Project As:"), sInitialValue);
               m_pTimerSavePathTextCtrl->SetEditable(false);
               S.AddWindow(m_pTimerSavePathTextCtrl);
               m_pTimerSavePathButtonCtrl = S.Id(ID_AUTOSAVEPATH_BUTTON).AddButton(_("Select..."));
               }
            S.EndMultiColumn();
         }
         S.EndStatic();

         S.StartStatic(_("Automatic Export"), true);
         {
            m_pTimerAutoExportCheckBoxCtrl = S.Id(ID_AUTOEXPORT_CHECKBOX).AddCheckBox(_("Enable Automatic &Export?"), (bAutoExport ? "true" : "false"));
            S.StartMultiColumn(3, wxEXPAND);
            {
               S.AddPrompt(_("Export Project As:"));
               m_pTimerExportPathTextCtrl = NewPathControl(this, ID_AUTOEXPORTPATH_TEXT, _("Export Project As:"), wxT(""));
               m_pTimerExportPathTextCtrl->SetEditable(false);
               S.AddWindow(m_pTimerExportPathTextCtrl);
               m_pTimerExportPathButtonCtrl = S.Id(ID_AUTOEXPORTPATH_BUTTON).AddButton(_("Select..."));
            }
            S.EndMultiColumn();
         }
         S.EndStatic();

         S.StartStatic(_("Options"), true);
         {

            wxArrayString arrayOptions;
            arrayOptions.Add(_("Do nothing"));
            arrayOptions.Add(_("Exit Audacity"));
            arrayOptions.Add(_("Restart system"));
            arrayOptions.Add(_("Shutdown system"));

            m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(0));
            m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(1));
#ifdef __WINDOWS__
            m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(2));
            m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(3));
#endif
            m_sTimerAfterCompleteOption = arrayOptions.Item(iPostTimerRecordAction);

            m_pTimerAfterCompleteChoiceCtrl = S.AddChoice(_("After Recording completes:"),
                                                          m_sTimerAfterCompleteOption,
                                                          &m_sTimerAfterCompleteOptionsArray);
         }
         S.EndStatic();

      }
      S.EndVerticalLay();
   }
   S.EndMultiColumn();

   // MY: Added the help button here
   S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);

   Layout();
   Fit();
   SetMinSize(GetSize());
   Center();

   EnableDisableAutoControls(bAutoSave, CONTROL_GROUP_SAVE);
   EnableDisableAutoControls(bAutoExport, CONTROL_GROUP_EXPORT);
}