本文整理汇总了C++中PIDController::SetTolerance方法的典型用法代码示例。如果您正苦于以下问题：C++ PIDController::SetTolerance方法的具体用法？C++ PIDController::SetTolerance怎么用？C++ PIDController::SetTolerance使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PIDController的用法示例。
在下文中一共展示了PIDController::SetTolerance方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: OperatorControl
void OperatorControl(void)
{
autonomous = false;
//myRobot.SetSafetyEnabled(false);
//myRobot.SetInvertedMotor(kFrontLeftMotor, true);
// myRobot.SetInvertedMotor(3, true);
//variables for great pid
double rightSpeed,leftSpeed;
float rightSP, leftSP, liftSP, lastLiftSP, gripSP, tempLeftSP, tempRightSP;
float stickY[2];
float stickYAbs[2];
bool lightOn = false;
AxisCamera &camera = AxisCamera::GetInstance();
camera.WriteResolution(AxisCameraParams::kResolution_160x120);
camera.WriteMaxFPS(5);
camera.WriteBrightness(50);
camera.WriteRotation(AxisCameraParams::kRotation_0);
rightEncoder->Start();
leftEncoder->Start();
liftEncoder->Start();
rightEncoder->Reset();
leftEncoder->Reset();
liftEncoder->Reset();
bool fastest = false; //transmission mode
float reduction = 1; //gear reduction from
bool bDrivePID = false;
//float maxSpeed = 500;
float liftPower = 0;
float liftPos = -10;
bool disengageBrake = false;
int count = 0;
//int popCount = 0;
double popStart = 0;
double popTime = 0;
int popStage = 0;
int liftCount = 0;
int liftCount2 = 0;
const float LOG17 = log(17.61093344);
float liftPowerAbs = 0;
float gripError = 0;
float gripErrorAbs = 0;
float gripPropMod = 0;
float gripIntMod = 0;
bool shiftHigh = false;
leftEncoder->SetDistancePerPulse((6 * PI / 1000)/reduction); //6-inch wheels, 1000 raw counts per revolution,
rightEncoder->SetDistancePerPulse((6 * PI / 1000)/reduction); //about 1:1 gear ratio
DriverStationEnhancedIO &myEIO = driverStation->GetEnhancedIO();
GetWatchdog().SetEnabled(true);
GetWatchdog().SetExpiration(0.3);
PIDDriveLeft->SetOutputRange(-1, 1);
PIDDriveRight->SetOutputRange(-1, 1);
//PIDDriveLeft->SetInputRange(-244,244);
//PIDDriveRight->SetInputRange(-244,244);
PIDDriveLeft->SetTolerance(5);
PIDDriveRight->SetTolerance(5);
PIDDriveLeft->SetContinuous(false);
PIDDriveRight->SetContinuous(false);
//PIDDriveLeft->Enable();
//PIDDriveRight->Enable();
PIDDriveRight->SetPID(DRIVEPROPGAIN, DRIVEINTGAIN, DRIVEDERIVGAIN);
PIDDriveLeft->SetPID(DRIVEPROPGAIN, DRIVEINTGAIN, DRIVEDERIVGAIN);
liftSP = 0;
PIDLift->SetTolerance(10);
PIDLift->SetContinuous(false);
PIDLift->SetOutputRange(-0.75, 1.); //BUGBUG
PIDLift->Enable();
gripSP = 0;
float goalGripSP = 0;
bool useGoalSP = true;
bool gripPIDOn = true;
float gripP[10];
float gripI[10];
float gripD[10];
PIDGrip->SetOutputRange(-0.5, 0.28); //Negative goes up
PIDGrip->SetTolerance(5);
PIDGrip->SetSetpoint(0);
PIDGrip->Enable();
miniDep->Set(miniDep->kForward);
int i = 0;
while(i < 10)
{
gripP[i] = GRIPPROPGAIN;
i++;
}
i = 0;
while(i < 10)
{
gripI[i] = GRIPINTGAIN;
i++;
}
i = 0;
while(i < 10)
{
gripD[i] = GRIPDERIVGAIN;
i++;
}
//.........这里部分代码省略.........
示例2: Autonomous
void Autonomous(void)
{
#if 1
/*int autoMode = 0;
autoMode |= bcd1->Get();
autoMode <<= 1;
autoMode |= bcd2->Get();
autoMode <<= 1;
autoMode |= bcd3->Get()
;*/
//double ignoreLineStart = 0;
GetWatchdog().SetEnabled(true);
GetWatchdog().SetExpiration(0.2);
float liftSP = 0;
PIDLift->SetTolerance(10);
PIDLift->SetContinuous(false);
PIDLift->SetOutputRange(-0.75, 1); //BUGBUG
PIDLift->SetPID(LIFTPROPGAIN, LIFTINTGAIN, LIFTDERIVGAIN);
PIDLift->Enable();
PIDGrip->SetSetpoint(0);
PIDGrip->Enable();
stopCount = 0;
float reduction;
int counts = 0;
leftEncoder->Start();
rightEncoder->Start();
leftEncoder->Reset();
rightEncoder->Reset();
liftEncoder->Start();
liftEncoder->Reset();
leftEncoder->SetDistancePerPulse((6 * PI / 500)/reduction);
rightEncoder->SetDistancePerPulse((6 * PI / 500)/reduction);
double avgEncoderCount;
float leftSpeed = .2, rightSpeed = .2;
short int lsL,lsM,lsR;
lineFollowDone = false;
counts = 0;
//int fancyWaiter = 0;
int popstage = 0;
goPop = false;
double backStart = 0;
double backTime = 0;
double popStart = 0;
double popTime = 0;
bool backDone = false;
miniDep->Set(miniDep->kForward);
int liftCount = 0;
bool disengageBrake = false;
float lastLiftSP = 0;
gripOpen1->Set(true);
gripOpen2->Set(false);
gripLatch1->Set(true);
gripLatch2->Set(false);
while(IsAutonomous())
{
if(!(counts % 100))printf("%2.2f \n",getDistance());
if(backStart) backTime = GetClock();
if(popStart) popTime = GetClock();
//if(!ignoreLineStart)ignoreLineStart = GetClock();
if(!compSwitch->Get()) compressor->Set(compressor->kReverse);
else compressor->Set(compressor->kOff);
if(counts%3 == 0)
{
leftValue = lsLeft->Get();
middleValue = lsMiddle->Get();
rightValue = lsRight->Get();
}
counts++;
GetWatchdog().Feed();
//avgEncoderCount = (leftEncoder->Get() + rightEncoder->Get())/2;
//myRobot.SetLeftRightMotorOutputs(.2,.2);
//All three/five autonomous programs will do the same thing up until 87 inches from the wall
if (counts % 100 == 0){//TESTING
if(lsLeft->Get()){
lsL = 1;
}else{
lsL = 0;
}
if(lsRight->Get()){
lsR = 1;
}else{
lsR = 0;
}
if(lsMiddle->Get()){
lsM = 1;
}else{
lsM = 0;
}
//printf("Encoder: %2.2f \n", (float)avgEncoderCount);
//.........这里部分代码省略.........