C++ DRAWSEGMENT::SetAngle方法代码示例

本文整理汇总了C++中DRAWSEGMENT::SetAngle方法的典型用法代码示例。如果您正苦于以下问题：C++ DRAWSEGMENT::SetAngle方法的具体用法？C++ DRAWSEGMENT::SetAngle怎么用？C++ DRAWSEGMENT::SetAngle使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类DRAWSEGMENT的用法示例。

在下文中一共展示了DRAWSEGMENT::SetAngle方法的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: center

/*
 * Import Arc entities.
 */
void DXF2BRD_CONVERTER::addArc( const DRW_Arc& data )
{
    DRAWSEGMENT* segm = ( m_useModuleItems ) ?
                        static_cast< DRAWSEGMENT* >( new EDGE_MODULE( NULL ) ) : new DRAWSEGMENT;

    segm->SetLayer( ToLAYER_ID( m_brdLayer ) );
    segm->SetShape( S_ARC );

    // Init arc centre:
    wxPoint center( mapX( data.basePoint.x ), mapY( data.basePoint.y ) );
    segm->SetCenter( center );

    // Init arc start point
    double  arcStartx   = data.radious;
    double  arcStarty   = 0;
    double  startangle = data.staangle;
    double  endangle = data.endangle;

    RotatePoint( &arcStartx, &arcStarty, -RAD2DECIDEG( startangle ) );
    wxPoint arcStart( mapX( arcStartx + data.basePoint.x ),
                      mapY( arcStarty + data.basePoint.y ) );
    segm->SetArcStart( arcStart );

    // calculate arc angle (arcs are CCW, and should be < 0 in Pcbnew)
    double angle = -RAD2DECIDEG( endangle - startangle );

    if( angle > 0.0 )
        angle -= 3600.0;

    segm->SetAngle( angle );

    segm->SetWidth( mapDim( data.thickness == 0 ? m_defaultThickness : data.thickness ) );
    m_newItemsList.push_back( segm );
}

开发者ID:AlexanderBrevig，项目名称:kicad-source-mirror，代码行数:37，代码来源:dxf2brd_items.cpp

示例2: center

/*
 * Import Arc entities.
 */
void DXF2BRD_CONVERTER::addArc( const DRW_Arc& data )
{
    DRAWSEGMENT* segm = new DRAWSEGMENT( m_brd );

    segm->SetLayer( m_brdLayer );
    segm->SetShape( S_ARC );

    // Init arc centre:
    wxPoint center( mapX( data.basePoint.x ), mapY( data.basePoint.y ) );
    segm->SetCenter( center );

    // Init arc start point
    double  arcStartx   = data.radious;
    double  arcStarty   = 0;
    double  startangle = data.staangle;
    double  endangle = data.endangle;

    RotatePoint( &arcStartx, &arcStarty, -RAD2DECIDEG( startangle ) );
    wxPoint arcStart( mapX( arcStartx + data.basePoint.x ),
                      mapY( arcStarty + data.basePoint.y ) );
    segm->SetArcStart( arcStart );

    // calculate arc angle (arcs are CCW, and should be < 0 in Pcbnew)
    double angle = -RAD2DECIDEG( endangle - startangle );

    if( angle > 0.0 )
        angle -= 3600.0;

    segm->SetAngle( angle );

    segm->SetWidth( mapDim( data.thickness == 0 ? m_defaultThickness
                            : data.thickness ) );
    appendToBoard( segm );
}

开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:37，代码来源:dxf2brd_items.cpp

示例3: OnOkClick

void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
    m_parent->SaveCopyInUndoList( m_Item, UR_CHANGED );

    wxString msg;

    if( m_DC )
        m_Item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );

    msg = m_Center_StartXCtrl->GetValue();
    m_Item->SetStartX( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));

    msg = m_Center_StartYCtrl->GetValue();
    m_Item->SetStartY( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));

    msg = m_EndX_Radius_Ctrl->GetValue();
    m_Item->SetEndX( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));

    msg = m_EndY_Ctrl->GetValue();
    m_Item->SetEndY( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));

    msg = m_ThicknessCtrl->GetValue();
    m_Item->SetWidth( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));

    msg = m_DefaultThicknessCtrl->GetValue();
    int thickness = ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() );

    m_Item->SetLayer( m_LayerSelectionCtrl->GetCurrentSelection() + FIRST_NO_COPPER_LAYER);

    if( m_Item->GetLayer() == EDGE_N )
         m_brdSettings.m_EdgeSegmentWidth = thickness;
    else
         m_brdSettings.m_DrawSegmentWidth = thickness;

    if( m_Item->GetShape() == S_ARC )
    {
        double angle;
        m_Angle_Ctrl->GetValue().ToDouble( &angle );
        NORMALIZE_ANGLE_360(angle);
        m_Item->SetAngle( angle );
    }

    m_parent->OnModify();

    if( m_DC )
        m_Item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );

    m_Item->DisplayInfo( m_parent );

    m_parent->SetDesignSettings( m_brdSettings );

    Close( true );
}

开发者ID:，项目名称:，代码行数:56，代码来源:

示例4: OnOkClick

void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
{
    if( !itemValuesOK() )
        return;

    m_parent->SaveCopyInUndoList( m_item, UR_CHANGED );

    wxString msg;

    if( m_DC )
        m_item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );

    msg = m_Center_StartXCtrl->GetValue();
    m_item->SetStartX( ValueFromString( g_UserUnit, msg ) );

    msg = m_Center_StartYCtrl->GetValue();
    m_item->SetStartY( ValueFromString( g_UserUnit, msg ) );

    msg = m_EndX_Radius_Ctrl->GetValue();
    m_item->SetEndX( ValueFromString( g_UserUnit, msg ) );

    msg = m_EndY_Ctrl->GetValue();
    m_item->SetEndY( ValueFromString( g_UserUnit, msg ) );

    msg = m_ThicknessCtrl->GetValue();
    m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );

    msg = m_DefaultThicknessCtrl->GetValue();
    int thickness = ValueFromString( g_UserUnit, msg );

    m_item->SetLayer( ToLAYER_ID( m_LayerSelectionCtrl->GetLayerSelection() ) );

    if( m_item->GetLayer() == Edge_Cuts )
        m_brdSettings.m_EdgeSegmentWidth = thickness;
    else
        m_brdSettings.m_DrawSegmentWidth = thickness;

    if( m_item->GetShape() == S_ARC )
    {
        double angle;
        m_Angle_Ctrl->GetValue().ToDouble( &angle );
        NORMALIZE_ANGLE_360( angle );
        m_item->SetAngle( angle );
    }

    m_parent->OnModify();

    if( m_DC )
        m_item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );

    m_parent->SetMsgPanel( m_item );

    m_parent->SetDesignSettings( m_brdSettings );

    Close( true );
}

开发者ID:BTR1，项目名称:kicad-source-mirror，代码行数:56，代码来源:dialog_graphic_item_properties.cpp

示例5: TransferDataFromWindow

bool DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow()
{
    if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataFromWindow() )
        return false;

    m_parent->SaveCopyInUndoList( m_item, UR_CHANGED );

    wxString msg;

    if( m_DC )
        m_item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );

    msg = m_Center_StartXCtrl->GetValue();
    m_item->SetStartX( ValueFromString( g_UserUnit, msg ) );

    msg = m_Center_StartYCtrl->GetValue();
    m_item->SetStartY( ValueFromString( g_UserUnit, msg ) );

    msg = m_EndX_Radius_Ctrl->GetValue();
    m_item->SetEndX( ValueFromString( g_UserUnit, msg ) );

    msg = m_EndY_Ctrl->GetValue();
    m_item->SetEndY( ValueFromString( g_UserUnit, msg ) );

    msg = m_ThicknessCtrl->GetValue();
    m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );

    msg = m_DefaultThicknessCtrl->GetValue();
    int thickness = ValueFromString( g_UserUnit, msg );

    m_item->SetLayer( ToLAYER_ID( m_LayerSelectionCtrl->GetLayerSelection() ) );

    if( m_item->GetLayer() == Edge_Cuts )
        m_brdSettings.m_EdgeSegmentWidth = thickness;
    else
        m_brdSettings.m_DrawSegmentWidth = thickness;

    if( m_item->GetShape() == S_ARC )
    {
        m_item->SetAngle( m_AngleValue * 10.0 );
    }

    m_parent->OnModify();

    if( m_DC )
        m_item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );

    m_parent->SetMsgPanel( m_item );

    m_parent->SetDesignSettings( m_brdSettings );

    return true;
}

开发者ID:asutp，项目名称:kicad-source-mirror，代码行数:53，代码来源:dialog_graphic_item_properties.cpp

示例6: updateItem

void POINT_EDITOR::updateItem() const
{
    EDA_ITEM* item = m_editPoints->GetParent();

    switch( item->Type() )
    {
    case PCB_LINE_T:
    case PCB_MODULE_EDGE_T:
    {
        DRAWSEGMENT* segment = static_cast<DRAWSEGMENT*>( item );
        switch( segment->GetShape() )
        {
        case S_SEGMENT:
            if( isModified( m_editPoints->Point( SEG_START ) ) )
                segment->SetStart( wxPoint( m_editPoints->Point( SEG_START ).GetPosition().x,
                                            m_editPoints->Point( SEG_START ).GetPosition().y ) );

            else if( isModified( m_editPoints->Point( SEG_END ) ) )
                segment->SetEnd( wxPoint( m_editPoints->Point( SEG_END ).GetPosition().x,
                                          m_editPoints->Point( SEG_END ).GetPosition().y ) );

            break;

        case S_ARC:
        {
            const VECTOR2I& center = m_editPoints->Point( ARC_CENTER ).GetPosition();
            const VECTOR2I& start = m_editPoints->Point( ARC_START ).GetPosition();
            const VECTOR2I& end = m_editPoints->Point( ARC_END ).GetPosition();

            if( center != segment->GetCenter() )
            {
                wxPoint moveVector = wxPoint( center.x, center.y ) - segment->GetCenter();
                segment->Move( moveVector );

                m_editPoints->Point( ARC_START ).SetPosition( segment->GetArcStart() );
                m_editPoints->Point( ARC_END ).SetPosition( segment->GetArcEnd() );
            }

            else
            {
                segment->SetArcStart( wxPoint( start.x, start.y ) );

                VECTOR2D startLine = start - center;
                VECTOR2I endLine = end - center;
                double newAngle = RAD2DECIDEG( endLine.Angle() - startLine.Angle() );

                // Adjust the new angle to (counter)clockwise setting
                bool clockwise = ( segment->GetAngle() > 0 );

                if( clockwise && newAngle < 0.0 )
                    newAngle += 3600.0;
                else if( !clockwise && newAngle > 0.0 )
                    newAngle -= 3600.0;

                segment->SetAngle( newAngle );
            }

            break;
        }

        case S_CIRCLE:
        {
            const VECTOR2I& center = m_editPoints->Point( CIRC_CENTER ).GetPosition();
            const VECTOR2I& end = m_editPoints->Point( CIRC_END ).GetPosition();

            if( isModified( m_editPoints->Point( CIRC_CENTER ) ) )
            {
                wxPoint moveVector = wxPoint( center.x, center.y ) - segment->GetCenter();
                segment->Move( moveVector );
            }
            else
            {
                segment->SetEnd( wxPoint( end.x, end.y ) );
            }

            break;
        }

        default:        // suppress warnings
            break;
        }

        // Update relative coordinates for module edges
        if( EDGE_MODULE* edge = dyn_cast<EDGE_MODULE*>( item ) )
            edge->SetLocalCoord();

        break;
    }

    case PCB_ZONE_AREA_T:
    {
        ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
        zone->ClearFilledPolysList();
        CPolyLine* outline = zone->Outline();

        for( int i = 0; i < outline->GetCornersCount(); ++i )
        {
            VECTOR2I point = m_editPoints->Point( i ).GetPosition();
            outline->SetX( i, point.x );
            outline->SetY( i, point.y );
//.........这里部分代码省略.........

开发者ID:BTR1，项目名称:kicad-source-mirror，代码行数:101，代码来源:point_editor.cpp

示例7: segment_startpoint

void DXF2BRD_CONVERTER::insertArc( const wxRealPoint& aSegStart, const wxRealPoint& aSegEnd,
                                   double aBulge, int aWidth )
{
    DRAWSEGMENT* segm = ( m_useModuleItems ) ?
                        static_cast< DRAWSEGMENT* >( new EDGE_MODULE( NULL ) ) : new DRAWSEGMENT;

    wxPoint segment_startpoint( Millimeter2iu( aSegStart.x ), Millimeter2iu( aSegStart.y ) );
    wxPoint segment_endpoint( Millimeter2iu( aSegEnd.x ), Millimeter2iu( aSegEnd.y ) );

    // ensure aBulge represents an angle from +/- ( 0 .. approx 359.8 deg )
    if( aBulge < -2000.0 )
        aBulge = -2000.0;
    else if( aBulge > 2000.0 )
        aBulge = 2000.0;

    double ang = 4.0 * atan( aBulge );

    // reflect the Y values to put everything in a RHCS
    wxRealPoint sp( aSegStart.x, -aSegStart.y );
    wxRealPoint ep( aSegEnd.x, -aSegEnd.y );
    // angle from end->start
    double offAng = atan2( ep.y - sp.y, ep.x - sp.x );
    // length of subtended segment = 1/2 distance between the 2 points
    double d = 0.5 * sqrt( (sp.x - ep.x) * (sp.x - ep.x) + (sp.y - ep.y) * (sp.y - ep.y) );
    // midpoint of the subtended segment
    double xm   = ( sp.x + ep.x ) * 0.5;
    double ym   = ( sp.y + ep.y ) * 0.5;
    double radius = d / sin( ang * 0.5 );

    if( radius < 0.0 )
        radius = -radius;

    // calculate the height of the triangle with base d and hypotenuse r
    double dh2 = radius * radius - d * d;

    // this should only ever happen due to rounding errors when r == d
    if( dh2 < 0.0 )
        dh2 = 0.0;

    double h = sqrt( dh2 );

    if( ang < 0.0 )
        offAng -= M_PI_2;
    else
        offAng += M_PI_2;

    // for angles greater than 180 deg we need to flip the
    // direction in which the arc center is found relative
    // to the midpoint of the subtended segment.
    if( ang < -M_PI )
        offAng += M_PI;
    else if( ang > M_PI )
        offAng -= M_PI;

    // center point
    double cx = h * cos( offAng ) + xm;
    double cy = h * sin( offAng ) + ym;

    segm->SetLayer( ToLAYER_ID( m_brdLayer ) );
    segm->SetShape( S_ARC );
    segm->SetCenter( wxPoint( Millimeter2iu( cx ), Millimeter2iu( -cy ) ) );

    if( ang < 0.0 )
    {
        segm->SetArcStart( wxPoint( Millimeter2iu( ep.x ), Millimeter2iu( -ep.y ) ) );
        segm->SetAngle( RAD2DECIDEG( ang ) );
    }
    else
    {
        segm->SetArcStart( wxPoint( Millimeter2iu( sp.x ), Millimeter2iu( -sp.y ) ) );
        segm->SetAngle( RAD2DECIDEG( -ang ) );
    }

    segm->SetWidth( aWidth );

    m_newItemsList.push_back( segm );
    return;
}

开发者ID:AlexanderBrevig，项目名称:kicad-source-mirror，代码行数:78，代码来源:dxf2brd_items.cpp

注：本文中的DRAWSEGMENT::SetAngle方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。