C++ DRAWSEGMENT::GetWidth方法代码示例

void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg( )
/**************************************************************************/
/* Initialize messages and values in text control,
 * according to the item parameters values
*/
{
    SetFocus();
    m_StandardButtonsSizerOK->SetDefault();

    // Set unit symbol
    wxStaticText * texts_unit[] =
    {
        m_StartPointXUnit,
        m_StartPointYUnit,
        m_EndPointXUnit,
        m_EndPointYUnit,
        m_ThicknessTextUnit,
        m_DefaulThicknessTextUnit,
        NULL
    };

    for( int ii = 0; ; ii++ )
    {
        if( texts_unit[ii] == NULL )
            break;
        texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
    }

    wxString msg;

    // Change texts according to the segment shape:
    switch ( m_Item->GetShape() )
    {
    case S_CIRCLE:
        m_StartPointXLabel->SetLabel(_("Center X"));
        m_StartPointYLabel->SetLabel(_("Center Y"));
        m_EndPointXLabel->SetLabel(_("Point X"));
        m_EndPointYLabel->SetLabel(_("Point Y"));
        m_Angle_Text->Show(false);
        m_Angle_Ctrl->Show(false);
        m_AngleUnit->Show(false);
        break;

    case S_ARC:
        m_StartPointXLabel->SetLabel(_("Center X"));
        m_StartPointYLabel->SetLabel(_("Center Y"));
        m_EndPointXLabel->SetLabel(_("Start Point X"));
        m_EndPointYLabel->SetLabel(_("Start Point Y"));
        msg << m_Item->GetAngle();
        m_Angle_Ctrl->SetValue(msg);
        break;

    default:
        m_Angle_Text->Show(false);
        m_Angle_Ctrl->Show(false);
        m_AngleUnit->Show(false);
        break;
    }

    PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->GetStart().x,
        m_parent->GetInternalUnits() );

    PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->GetStart().y,
        m_parent->GetInternalUnits() );

    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->GetEnd().x,
        m_parent->GetInternalUnits() );

    PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->GetEnd().y,
        m_parent->GetInternalUnits() );

    PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->GetWidth(),
        m_parent->GetInternalUnits() );

    int thickness;

    if( m_Item->GetLayer() == EDGE_N )
        thickness =  m_brdSettings.m_EdgeSegmentWidth;
    else
        thickness =  m_brdSettings.m_DrawSegmentWidth;

    PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
        m_parent->GetInternalUnits() );

    for( int layer=FIRST_NO_COPPER_LAYER; layer <= LAST_NO_COPPER_LAYER;  ++layer )
    {
        m_LayerSelectionCtrl->Append( m_parent->GetBoard()->GetLayerName( layer ) );
    }

    int layer =  m_Item->GetLayer();
    // Control:
    if ( layer < FIRST_NO_COPPER_LAYER )
        layer = FIRST_NO_COPPER_LAYER;
    if ( layer > LAST_NO_COPPER_LAYER )
        layer = LAST_NO_COPPER_LAYER;
    m_LayerSelectionCtrl->SetSelection( layer - FIRST_NO_COPPER_LAYER );
}

/**
 * Function PlaceCells
 * Initialize the matrix routing by setting obstacles for each occupied cell
 * a cell set to HOLE is an obstacle for tracks and vias
 * a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
 * a cell set to CELL_is_EDGE is a frontier.
 * Tracks and vias having the same net code as net_code are skipped
 * (htey do not are obstacles)
 *
 * For single-sided Routing 1:
 * BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
 *
 * If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
 */
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
    int       ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
    int       marge, via_marge;
    LAYER_MSK layerMask;

    // use the default NETCLASS?
    NETCLASS* nc = aPcb->m_NetClasses.GetDefault();

    int       trackWidth = nc->GetTrackWidth();
    int       clearance  = nc->GetClearance();
    int       viaSize    = nc->GetViaDiameter();

    marge     = clearance + (trackWidth / 2);
    via_marge = clearance + (viaSize / 2);

    // Place PADS on matrix routing:
    for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
    {
        D_PAD* pad = aPcb->GetPad( i );

        if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
        {
            ::PlacePad( pad, HOLE, marge, WRITE_CELL );
        }

        ::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
    }

    // Place outlines of modules on matrix routing, if they are on a copper layer
    // or on the edge layer
    TRACK tmpSegm( NULL );  // A dummy track used to create segments.

    for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
    {
        for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
        {
            switch( item->Type() )
            {
            case PCB_MODULE_EDGE_T:
            {
                EDGE_MODULE* edge = (EDGE_MODULE*) item;

                tmpSegm.SetLayer( edge->GetLayer() );

                if( tmpSegm.GetLayer() == EDGE_N )
                    tmpSegm.SetLayer( UNDEFINED_LAYER );

                tmpSegm.SetStart( edge->GetStart() );
                tmpSegm.SetEnd(   edge->GetEnd() );
                tmpSegm.SetShape( edge->GetShape() );
                tmpSegm.SetWidth( edge->GetWidth() );
                tmpSegm.m_Param = edge->GetAngle();
                tmpSegm.SetNet( -1 );

                TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
                TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
            }
            break;

            default:
                break;
            }
        }
    }

    // Place board outlines and texts on copper layers:
    for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
    {
        switch( item->Type() )
        {
        case PCB_LINE_T:
        {
            DRAWSEGMENT* DrawSegm;

            int          type_cell = HOLE;
            DrawSegm = (DRAWSEGMENT*) item;
            tmpSegm.SetLayer( DrawSegm->GetLayer() );

            if( DrawSegm->GetLayer() == EDGE_N )
            {
                tmpSegm.SetLayer( UNDEFINED_LAYER );
                type_cell |= CELL_is_EDGE;
            }

            tmpSegm.SetStart( DrawSegm->GetStart() );
//.........这里部分代码省略.........

bool DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataToWindow()
{
    // Set unit symbol
    wxStaticText* texts_unit[] =
    {
        m_StartPointXUnit,
        m_StartPointYUnit,
        m_EndPointXUnit,
        m_EndPointYUnit,
        m_ThicknessTextUnit,
        m_DefaulThicknessTextUnit,
    };

    for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
    {
        texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
    }

    wxString msg;

    // Change texts according to the segment shape:
    switch( m_item->GetShape() )
    {
    case S_CIRCLE:
        SetTitle( _( "Circle Properties" ) );
        m_StartPointXLabel->SetLabel( _( "Center X:" ) );
        m_StartPointYLabel->SetLabel( _( "Center Y:" ) );
        m_EndPointXLabel->SetLabel( _( "Point X:" ) );
        m_EndPointYLabel->SetLabel( _( "Point Y:" ) );
        m_AngleText->Show( false );
        m_AngleCtrl->Show( false );
        m_AngleUnit->Show( false );
        break;

    case S_ARC:
        SetTitle( _( "Arc Properties" ) );
        m_StartPointXLabel->SetLabel( _( "Center X:" ) );
        m_StartPointYLabel->SetLabel( _( "Center Y:" ) );
        m_EndPointXLabel->SetLabel( _( "Start Point X:" ) );
        m_EndPointYLabel->SetLabel( _( "Start Point Y:" ) );

        m_AngleValue = m_item->GetAngle() / 10.0;
        break;

    case S_SEGMENT:
        SetTitle( _( "Line Segment Properties" ) );

        // Fall through.
    default:
        m_AngleText->Show( false );
        m_AngleCtrl->Show( false );
        m_AngleUnit->Show( false );
        break;
    }

    PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );

    PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );

    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );

    PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );

    PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );

    int thickness;

    if( m_item->GetLayer() == Edge_Cuts )
        thickness = m_brdSettings.m_EdgeSegmentWidth;
    else
        thickness = m_brdSettings.m_DrawSegmentWidth;

    PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );

    // Configure the layers list selector
    m_LayerSelectionCtrl->SetLayersHotkeys( false );
    m_LayerSelectionCtrl->SetLayerSet( LSET::AllCuMask() );
    m_LayerSelectionCtrl->SetBoardFrame( m_parent );
    m_LayerSelectionCtrl->Resync();

    if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
    {
        wxMessageBox( _( "This item was on an unknown layer.\n"
                         "It has been moved to the drawings layer. Please fix it." ) );
        m_LayerSelectionCtrl->SetLayerSelection( Dwgs_User );
    }

    return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}

//.........这里部分代码省略.........
                break;
            }
        }

        else if ( evt->IsClick( BUT_RIGHT ) )
        {
            showContextMenu();
        }

        else if( evt->IsClick( BUT_LEFT ) )
        {
            // Place the drawing
            BOARD_ITEM_CONTAINER* parent = m_frame->GetModel();

            for( auto item : preview )
            {
                if( m_editModules )
                {
                    // Modules use different types for the same things,
                    // so we need to convert imported items to appropriate classes.
                    BOARD_ITEM* converted = NULL;

                    switch( item->Type() )
                    {
                    case PCB_TEXT_T:
                    {
                        TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item );
                        TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent );
                        // Assignment operator also copies the item PCB_TEXT_T type,
                        // so it cannot be added to a module which handles PCB_MODULE_TEXT_T
                        textMod->SetPosition( text->GetPosition() );
                        textMod->SetText( text->GetText() );
                        textMod->SetSize( text->GetSize() );
                        textMod->SetThickness( text->GetThickness() );
                        textMod->SetOrientation( text->GetOrientation() );
                        textMod->SetTextPosition( text->GetTextPosition() );
                        textMod->SetSize( text->GetSize() );
                        textMod->SetMirrored( text->IsMirrored() );
                        textMod->SetAttributes( text->GetAttributes() );
                        textMod->SetItalic( text->IsItalic() );
                        textMod->SetBold( text->IsBold() );
                        textMod->SetHorizJustify( text->GetHorizJustify() );
                        textMod->SetVertJustify( text->GetVertJustify() );
                        textMod->SetMultilineAllowed( text->IsMultilineAllowed() );
                        converted = textMod;
                        break;
                    }

                    case PCB_LINE_T:
                    {
                        DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item );
                        EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent );

                        // Assignment operator also copies the item PCB_LINE_T type,
                        // so it cannot be added to a module which handles PCB_MODULE_EDGE_T
                        modSeg->SetWidth( seg->GetWidth() );
                        modSeg->SetStart( seg->GetStart() );
                        modSeg->SetEnd( seg->GetEnd() );
                        modSeg->SetAngle( seg->GetAngle() );
                        modSeg->SetShape( seg->GetShape() );
                        modSeg->SetType( seg->GetType() );
                        modSeg->SetBezControl1( seg->GetBezControl1() );
                        modSeg->SetBezControl2( seg->GetBezControl2() );
                        modSeg->SetBezierPoints( seg->GetBezierPoints() );
                        modSeg->SetPolyPoints( seg->GetPolyPoints() );
                        converted = modSeg;
                        break;
                    }

                    default:
                        assert( false );
                        break;
                    }

                    if( converted )
                        converted->SetLayer( item->GetLayer() );

                    delete item;
                    item = converted;
                }

                if( item )
                    commit.Add( item );
            }

            commit.Push( _( "Place a DXF drawing" ) );
            break;
        }
    }

    preview.Clear();

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    return 0;
}

void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg()
{
    m_StandardButtonsSizerOK->SetDefault();

    // Set unit symbol
    wxStaticText* texts_unit[] =
    {
        m_StartPointXUnit,
        m_StartPointYUnit,
        m_EndPointXUnit,
        m_EndPointYUnit,
        m_ThicknessTextUnit,
        m_DefaulThicknessTextUnit,
        NULL
    };

    for( int ii = 0; ; ii++ )
    {
        if( texts_unit[ii] == NULL )
            break;

        texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
    }

    wxString msg;

    // Change texts according to the segment shape:
    switch( m_item->GetShape() )
    {
    case S_CIRCLE:
        SetTitle( _( "Circle Properties" ) );
        m_StartPointXLabel->SetLabel( _( "Center X" ) );
        m_StartPointYLabel->SetLabel( _( "Center Y" ) );
        m_EndPointXLabel->SetLabel( _( "Point X" ) );
        m_EndPointYLabel->SetLabel( _( "Point Y" ) );
        m_Angle_Text->Show( false );
        m_Angle_Ctrl->Show( false );
        m_AngleUnit->Show( false );
        break;

    case S_ARC:
        SetTitle( _( "Arc Properties" ) );
        m_StartPointXLabel->SetLabel( _( "Center X" ) );
        m_StartPointYLabel->SetLabel( _( "Center Y" ) );
        m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
        m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );

        // Here the angle is a double, but the UI is still working with integers.
        msg << int( m_item->GetAngle() );
        m_Angle_Ctrl->SetValue( msg );
        break;

    case S_SEGMENT:
        SetTitle( _( "Line Segment Properties" ) );

        // Fall through.
    default:
        m_Angle_Text->Show( false );
        m_Angle_Ctrl->Show( false );
        m_AngleUnit->Show( false );
        break;
    }

    PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );

    PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );

    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );

    PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );

    PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );

    int thickness;

    if( m_item->GetLayer() == Edge_Cuts )
        thickness = m_brdSettings.m_EdgeSegmentWidth;
    else
        thickness = m_brdSettings.m_DrawSegmentWidth;

    PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );

    // Configure the layers list selector
    m_LayerSelectionCtrl->SetLayersHotkeys( false );
    m_LayerSelectionCtrl->SetLayerSet( LSET::AllCuMask() );
    m_LayerSelectionCtrl->SetBoardFrame( m_parent );
    m_LayerSelectionCtrl->Resync();

    if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
    {
        wxMessageBox( _( "This item was on an unknown layer.\n"
                         "It has been moved to the drawings layer. Please fix it." ) );
        m_LayerSelectionCtrl->SetLayerSelection( Dwgs_User );
    }
}

/**
 * Function ConvertOutlineToPolygon
 * build a polygon (with holes) from a DRAWSEGMENT list, which is expected to be
 * a outline, therefore a closed main outline with perhaps closed inner outlines.
 * These closed inner outlines are considered as holes in the main outline
 * @param aSegList the initial list of drawsegments (only lines, circles and arcs).
 * @param aPolygons will contain the complex polygon.
 * @param aTolerance is the max distance between points that is still accepted as connected (internal units)
 * @param aErrorText is a wxString to return error message.
 * @param aErrorLocation is the optional position of the error in the outline
 */
bool ConvertOutlineToPolygon( std::vector<DRAWSEGMENT*>& aSegList, SHAPE_POLY_SET& aPolygons,
                              wxString* aErrorText, unsigned int aTolerance, wxPoint* aErrorLocation )
{
    if( aSegList.size() == 0 )
        return true;

    wxString msg;

    // Make a working copy of aSegList, because the list is modified during calculations
    std::vector< DRAWSEGMENT* > segList = aSegList;

    DRAWSEGMENT* graphic;
    wxPoint prevPt;

    // Find edge point with minimum x, this should be in the outer polygon
    // which will define the perimeter Edge.Cuts polygon.
    wxPoint xmin    = wxPoint( INT_MAX, 0 );
    int     xmini   = 0;

    for( size_t i = 0; i < segList.size(); i++ )
    {
        graphic = (DRAWSEGMENT*) segList[i];

        switch( graphic->GetShape() )
        {
        case S_SEGMENT:
            {
                if( graphic->GetStart().x < xmin.x )
                {
                    xmin    = graphic->GetStart();
                    xmini   = i;
                }

                if( graphic->GetEnd().x < xmin.x )
                {
                    xmin    = graphic->GetEnd();
                    xmini   = i;
                }
            }
            break;

        case S_ARC:
            // Freerouter does not yet understand arcs, so approximate
            // an arc with a series of short lines and put those
            // line segments into the !same! PATH.
            {
                wxPoint  pstart = graphic->GetArcStart();
                wxPoint  center = graphic->GetCenter();
                double   angle  = -graphic->GetAngle();
                double   radius = graphic->GetRadius();
                int      steps  = GetArcToSegmentCount( radius, ARC_LOW_DEF, angle / 10.0 );
                wxPoint  pt;

                for( int step = 1; step<=steps; ++step )
                {
                    double rotation = ( angle * step ) / steps;

                    pt = pstart;

                    RotatePoint( &pt, center, rotation );

                    if( pt.x < xmin.x )
                    {
                        xmin  = pt;
                        xmini = i;
                    }
                }
            }
            break;

        case S_CIRCLE:
            {
                wxPoint pt = graphic->GetCenter();

                // pt has minimum x point
                pt.x -= graphic->GetRadius();

                // when the radius <= 0, this is a mal-formed circle. Skip it
                if( graphic->GetRadius() > 0 && pt.x < xmin.x )
                {
                    xmin  = pt;
                    xmini = i;
                }
            }
            break;

        case S_CURVE:
            {
                graphic->RebuildBezierToSegmentsPointsList( graphic->GetWidth() );
//.........这里部分代码省略.........