C++ DEVICE::set_part_spooled方法代码示例

void dvd_remove_empty_part(DCR *dcr) 
{
   DEVICE *dev = dcr->dev;

   /* Remove the last part file if it is empty */
   if (dev->is_dvd() && dev->num_dvd_parts > 0) {
      struct stat statp;
      uint32_t part_save = dev->part;
      POOL_MEM archive_name(PM_FNAME);
      int status;

      dev->part = dev->num_dvd_parts;
      make_spooled_dvd_filename(dev, archive_name);
      /* Check that the part file is empty */
      status = stat(archive_name.c_str(), &statp);
      if (status == 0 && statp.st_size == 0) {
         Dmsg3(100, "Unlink empty part in close call make_dvd_filename. part=%d num=%d vol=%s\n", 
                part_save, dev->num_dvd_parts, dev->getVolCatName());
         Dmsg1(100, "unlink(%s)\n", archive_name.c_str());
         unlink(archive_name.c_str());
         if (part_save == dev->part) {
            dev->set_part_spooled(false);  /* no spooled part left */
         }
      } else if (status < 0) {                         
         if (part_save == dev->part) {
            dev->set_part_spooled(false);  /* spool doesn't exit */
         }
      }       
      dev->part = part_save;               /* restore part number */
   }
}

bool truncate_dvd(DCR *dcr) 
{
   DEVICE* dev = dcr->dev;

   dev->clear_freespace_ok();             /* need to update freespace */
   dev->close_part(dcr);

   if (!dev->unmount(1)) {
      Dmsg0(400, "truncate_dvd: Failed to unmount DVD\n");
      return false;
   }

   /* If necessary, delete its spool file. */
   if (dev->is_part_spooled()) {
      POOL_MEM archive_name(PM_FNAME);
      /* Delete spool file */
      make_spooled_dvd_filename(dev, archive_name);
      unlink(archive_name.c_str());
      dev->set_part_spooled(false);
   }

   /* Set num_dvd_parts to zero (on disk) */
   dev->part = 0;
   dev->num_dvd_parts = 0;
   dcr->VolCatInfo.VolCatParts = 0;
   dev->VolCatInfo.VolCatParts = 0;
   
   Dmsg0(400, "truncate_dvd: Opening first part (1)...\n");
   
   dev->truncating = true;
   /* This creates a zero length spool file and sets part=1 */
   if (!dvd_open_first_part(dcr, CREATE_READ_WRITE)) {
      Dmsg0(400, "truncate_dvd: Error while opening first part (1).\n");
      dev->truncating = false;
      return false;
   }

   dev->close_part(dcr);
   
   Dmsg0(400, "truncate_dvd: Opening first part (2)...\n");
   
   /* 
    * Now actually truncate the DVD which is done by writing
    *  a zero length part to the DVD/
    */
   if (!dvd_write_part(dcr)) {
      Dmsg0(400, "truncate_dvd: Error while writing to DVD.\n");
      dev->truncating = false;
      return false;
   }
   dev->truncating = false;
   
   /* Set num_dvd_parts to zero (on disk) */
   dev->part = 0;
   dev->num_dvd_parts = 0;
   dcr->VolCatInfo.VolCatParts = 0;
   dev->VolCatInfo.VolCatParts = 0;
   /* Clear the size of the volume */
   dev->VolCatInfo.VolCatBytes = 0;
   dcr->VolCatInfo.VolCatBytes = 0;

   /* Update catalog */
   if (!dir_update_volume_info(dcr, false, true)) {
      return false;
   }
   
   return true;
}

/*
 * Open the next part file.
 *  - Close the fd
 *  - Increment part number 
 *  - Reopen the device
 */
int dvd_open_next_part(DCR *dcr)
{
   DEVICE *dev = dcr->dev;

   Dmsg6(29, "Enter: == open_next_part part=%d npart=%d dev=%s vol=%s mode=%d file_addr=%d\n", 
      dev->part, dev->num_dvd_parts, dev->print_name(),
         dev->getVolCatName(), dev->openmode, dev->file_addr);
   if (!dev->is_dvd()) {
      Dmsg1(100, "Device %s is not dvd!!!!\n", dev->print_name()); 
      return -1;
   }
   
   /* When appending, do not open a new part if the current is empty */
   if (dev->can_append() && (dev->part > dev->num_dvd_parts) && 
       (dev->part_size == 0)) {
      Dmsg0(29, "open_next_part exited immediately (dev->part_size == 0).\n");
      return dev->fd();
   }

   dev->close_part(dcr);               /* close current part */
   
   /*
    * If we have a spooled part open, write it to the
    *  DVD before opening the next part.
    */
   if (dev->is_part_spooled()) {
      Dmsg2(100, "Before open next write previous. part=%d num_parts=%d\n",
         dev->part, dev->num_dvd_parts);
      if (!dvd_write_part(dcr)) {
         Dmsg0(29, "Error in dvd_write part.\n");
         return -1;
      }
   }
     
   dev->part_start += dev->part_size;
   dev->part++;
   Dmsg2(29, "Inc part=%d num_dvd_parts=%d\n", dev->part, dev->num_dvd_parts);

   /* Are we working on a part past what is written in the DVD? */
   if (dev->num_dvd_parts < dev->part) {
      POOL_MEM archive_name(PM_FNAME);
      struct stat buf;
      /* 
       * First check what is on DVD.  If our part is there, we
       *   are in trouble, so bail out.
       * NB: This is however not a problem if we are writing the first part.
       * It simply means that we are over writing an existing volume...
       */
      if (dev->num_dvd_parts > 0) {
         make_mounted_dvd_filename(dev, archive_name);   /* makes dvd name */
         Dmsg1(100, "Check if part on DVD: %s\n", archive_name.c_str());
         if (stat(archive_name.c_str(), &buf) == 0) {
            /* bad news bail out */
            dev->set_part_spooled(false);
            Mmsg1(&dev->errmsg, _("Next Volume part already exists on DVD. Cannot continue: %s\n"),
               archive_name.c_str());
            return -1;
         }
      }

#ifdef neeeded
      Dmsg2(400, "num_dvd_parts=%d part=%d\n", dev->num_dvd_parts, dev->part);
      make_spooled_dvd_filename(dev, archive_name);   /* makes spool name */
      
      /* Check if the next part exists in spool directory . */
      Dmsg1(100, "Check if part on spool: %s\n", archive_name.c_str());
      if ((stat(archive_name.c_str(), &buf) == 0) || (errno != ENOENT)) {
         Dmsg1(29, "======= Part %s is in the way, deleting it...\n", archive_name.c_str());
         /* Then try to unlink it */
         if (unlink(archive_name.c_str()) < 0) {
            berrno be;
            dev->set_part_spooled(false);
            dev->dev_errno = errno;
            Mmsg2(dev->errmsg, _("open_next_part can't unlink existing part %s, ERR=%s\n"), 
                   archive_name.c_str(), be.bstrerror());
            return -1;
         }
      }
#endif
   }

   Dmsg2(400, "Call dev->open(vol=%s, mode=%d)\n", dcr->getVolCatName(), 
         dev->openmode);

   /* Open next part.  Note, this sets part_size for part opened. */
   if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
      return -1;
   } 
   dev->set_labeled();                   /* all next parts are "labeled" */
   
   return dev->fd();
}

/*
 * Note!!!! Part numbers now begin at 1. The part number is
 *  suppressed from the first part, which is just the Volume
 *  name. Each subsequent part is the Volumename.partnumber.
 *
 * Write a part (Vol, Vol.2, ...) from the spool to the DVD   
 * This routine does not update the part number, so normally, you
 *  should call open_next_part()
 *
 * It is also called from truncate_dvd to "blank" the medium, as
 *  well as from block.c when the DVD is full to write the last part.
 */
bool dvd_write_part(DCR *dcr)
{
   DEVICE *dev = dcr->dev;
   POOL_MEM archive_name(PM_FNAME);
   
   /*
    * Don't write empty part files.
    * This is only useful when growisofs does not support write beyond
    * the 4GB boundary.
    * Example :
    *   - 3.9 GB on the volume, dvd-freespace reports 0.4 GB free
    *   - Write 0.2 GB on the volume, Bacula thinks it could still
    *     append data, it creates a new empty part.
    *   - dvd-freespace reports 0 GB free, as the 4GB boundary has
    *     been crossed
    *   - Bacula thinks he must finish to write to the device, so it
    *     tries to write the last part (0-byte), but dvd-writepart fails...
    *
    * There is one exception: when recycling a volume, we write a blank part
    * file, so, then, we need to accept to write it.
    */
   if (dev->part_size == 0 && !dev->truncating) {
      Dmsg2(29, "dvd_write_part: device is %s, won't write blank part %d\n", dev->print_name(), dev->part);
      /* Delete spool file */
      make_spooled_dvd_filename(dev, archive_name);
      unlink(archive_name.c_str());
      dev->set_part_spooled(false);
      Dmsg1(29, "========= unlink(%s)\n", archive_name.c_str());
      Dsm_check(400);
      return true;
   }
   
   POOL_MEM ocmd(PM_FNAME);
   POOL_MEM results(PM_MESSAGE);
   char* icmd;
   int status;
   int timeout;
   char ed1[50];
   
   dev->clear_freespace_ok();             /* need to update freespace */

   Dsm_check(400);
   Dmsg3(29, "dvd_write_part: device is %s, part is %d, is_mounted=%d\n", dev->print_name(), dev->part, dev->is_mounted());
   icmd = dev->device->write_part_command;
   
   dev->edit_mount_codes(ocmd, icmd);
      
   /*
    * original line follows
    * timeout = dev->max_open_wait + (dev->max_part_size/(1350*1024/2));
    * I modified this for a longer timeout; pre-formatting, blanking and
    * writing can take quite a while
    */

   /* Explanation of the timeout value, when writing the first part,
    *  by Arno Lehmann :
    * 9 GB, write speed 1x: 6990 seconds (almost 2 hours...)
    * Overhead: 900 seconds (starting, initializing, finalizing,probably 
    *   reloading 15 minutes)
    * Sum: 15780.
    * A reasonable last-exit timeout would be 16000 seconds. Quite long - 
    * almost 4.5 hours, but hopefully, that timeout will only ever be needed 
    * in case of a serious emergency.
    */

   if (dev->part == 1) {
      timeout = 16000;
   } else {
      timeout = dev->max_open_wait + (dev->part_size/(1350*1024/4));
   }

   Dmsg2(20, "Write part: cmd=%s timeout=%d\n", ocmd.c_str(), timeout);
   status = run_program_full_output(ocmd.c_str(), timeout, results.addr());
   Dmsg2(20, "Write part status=%d result=%s\n", status, results.c_str());

   dev->blank_dvd = false;
   if (status != 0) {
      Jmsg2(dcr->jcr, M_FATAL, 0, _("Error writing part %d to the DVD: ERR=%s\n"),
         dev->part, results.c_str());
      Mmsg1(dev->errmsg, _("Error while writing current part to the DVD: %s"), 
            results.c_str());
      Dmsg1(100, "%s\n", dev->errmsg);
      dev->dev_errno = EIO;
      if (!dev->truncating) {
         dcr->mark_volume_in_error();
      }
      Dsm_check(400);
      return false;
//.........这里部分代码省略.........