本文整理汇总了C++中DEVICE::print_blocked方法的典型用法代码示例。如果您正苦于以下问题:C++ DEVICE::print_blocked方法的具体用法?C++ DEVICE::print_blocked怎么用?C++ DEVICE::print_blocked使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类DEVICE
的用法示例。
在下文中一共展示了DEVICE::print_blocked方法的2个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: wait_for_sysop
/*
* Wait for SysOp to mount a tape on a specific device
*
* Returns: W_ERROR, W_TIMEOUT, W_POLL, W_MOUNT, or W_WAKE
*/
int wait_for_sysop(DCR *dcr)
{
struct timeval tv;
struct timezone tz;
struct timespec timeout;
time_t last_heartbeat = 0;
time_t first_start = time(NULL);
int status = 0;
int add_wait;
bool unmounted;
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
dev->Lock();
Dmsg1(dbglvl, "Enter blocked=%s\n", dev->print_blocked());
/*
* Since we want to mount a tape, make sure current one is
* not marked as using this drive.
*/
volume_unused(dcr);
unmounted = dev->is_device_unmounted();
dev->poll = false;
/*
* Wait requested time (dev->rem_wait_sec). However, we also wake up every
* HB_TIME seconds and send a heartbeat to the FD and the Director
* to keep stateful firewalls from closing them down while waiting
* for the operator.
*/
add_wait = dev->rem_wait_sec;
if (me->heartbeat_interval && add_wait > me->heartbeat_interval) {
add_wait = me->heartbeat_interval;
}
/* If the user did not unmount the tape and we are polling, ensure
* that we poll at the correct interval.
*/
if (!unmounted && dev->vol_poll_interval && add_wait > dev->vol_poll_interval) {
add_wait = dev->vol_poll_interval;
}
if (!unmounted) {
Dmsg1(dbglvl, "blocked=%s\n", dev->print_blocked());
dev->dev_prev_blocked = dev->blocked();
dev->set_blocked(BST_WAITING_FOR_SYSOP); /* indicate waiting for mount */
}
for ( ; !job_canceled(jcr); ) {
time_t now, start, total_waited;
gettimeofday(&tv, &tz);
timeout.tv_nsec = tv.tv_usec * 1000;
timeout.tv_sec = tv.tv_sec + add_wait;
Dmsg4(dbglvl, "I'm going to sleep on device %s. HB=%d rem_wait=%d add_wait=%d\n",
dev->print_name(), (int)me->heartbeat_interval, dev->rem_wait_sec, add_wait);
start = time(NULL);
/* Wait required time */
status = pthread_cond_timedwait(&dev->wait_next_vol, &dev->m_mutex, &timeout);
Dmsg2(dbglvl, "Wokeup from sleep on device status=%d blocked=%s\n", status,
dev->print_blocked());
now = time(NULL);
total_waited = now - first_start;
dev->rem_wait_sec -= (now - start);
/* Note, this always triggers the first time. We want that. */
if (me->heartbeat_interval) {
if (now - last_heartbeat >= me->heartbeat_interval) {
/* send heartbeats */
if (jcr->file_bsock) {
jcr->file_bsock->signal(BNET_HEARTBEAT);
Dmsg0(dbglvl, "Send heartbeat to FD.\n");
}
if (jcr->dir_bsock) {
jcr->dir_bsock->signal(BNET_HEARTBEAT);
}
last_heartbeat = now;
}
}
if (status == EINVAL) {
berrno be;
Jmsg1(jcr, M_FATAL, 0, _("pthread timedwait error. ERR=%s\n"), be.bstrerror(status));
status = W_ERROR; /* error */
break;
}
/*
* Continue waiting if operator is labeling volumes
*/
if (dev->blocked() == BST_WRITING_LABEL) {
continue;
}
//.........这里部分代码省略.........
示例2: dir_ask_sysop_to_mount_volume
/**
* Request to mount specific Volume
*
* Entered with device blocked and dcr->VolumeName is desired
* volume.
* Leaves with device blocked.
*
* Returns: true on success (operator issues a mount command)
* false on failure
* Note, must create dev->errmsg on error return.
*
*/
bool dir_ask_sysop_to_mount_volume(DCR *dcr, int mode)
{
int status = W_TIMEOUT;
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
Dmsg0(dbglvl, "enter dir_ask_sysop_to_mount_volume\n");
if (!dcr->VolumeName[0]) {
Mmsg0(dev->errmsg, _("Cannot request another volume: no volume name given.\n"));
return false;
}
ASSERT(dev->blocked());
for ( ;; ) {
if (job_canceled(jcr)) {
Mmsg(dev->errmsg, _("Job %s canceled while waiting for mount on Storage Device %s.\n"),
jcr->Job, dev->print_name());
return false;
}
/*
* If we are not polling, and the wait timeout or the
* user explicitly did a mount, send him the message.
* Otherwise skip it.
*/
if (!dev->poll && (status == W_TIMEOUT || status == W_MOUNT)) {
const char *msg;
if (mode == ST_APPENDREADY) {
msg = _("Please mount append Volume \"%s\" or label a new one for:\n"
" Job: %s\n"
" Storage: %s\n"
" Pool: %s\n"
" Media type: %s\n");
} else {
msg = _("Please mount read Volume \"%s\" for:\n"
" Job: %s\n"
" Storage: %s\n"
" Pool: %s\n"
" Media type: %s\n");
}
Jmsg(jcr, M_MOUNT, 0, msg, dcr->VolumeName, jcr->Job,
dev->print_name(), dcr->pool_name, dcr->media_type);
Dmsg3(dbglvl, "Mount \"%s\" on device \"%s\" for Job %s\n",
dcr->VolumeName, dev->print_name(), jcr->Job);
}
jcr->sendJobStatus(JS_WaitMount);
status = wait_for_sysop(dcr); /* wait on device */
Dmsg1(dbglvl, "Back from wait_for_sysop status=%d\n", status);
if (dev->poll) {
Dmsg1(dbglvl, "Poll timeout in mount vol on device %s\n", dev->print_name());
Dmsg1(dbglvl, "Blocked=%s\n", dev->print_blocked());
goto get_out;
}
if (status == W_TIMEOUT) {
if (!double_dev_wait_time(dev)) {
Mmsg(dev->errmsg, _("Max time exceeded waiting to mount Storage Device %s for Job %s\n"),
dev->print_name(), jcr->Job);
Jmsg(jcr, M_FATAL, 0, "%s", dev->errmsg);
Dmsg1(dbglvl, "Gave up waiting on device %s\n", dev->print_name());
return false; /* exceeded maximum waits */
}
continue;
}
if (status == W_ERROR) {
berrno be;
Mmsg(dev->errmsg, _("pthread error in mount_volume\n"));
Jmsg(jcr, M_FATAL, 0, "%s", dev->errmsg);
return false;
}
Dmsg1(dbglvl, "Someone woke me for device %s\n", dev->print_name());
break;
}
get_out:
jcr->sendJobStatus(JS_Running);
Dmsg0(dbglvl, "leave dir_ask_sysop_to_mount_volume\n");
return true;
}