本文整理汇总了C++中CHandlingEntry::SetDragCoeff方法的典型用法代码示例。如果您正苦于以下问题：C++ CHandlingEntry::SetDragCoeff方法的具体用法？C++ CHandlingEntry::SetDragCoeff怎么用？C++ CHandlingEntry::SetDragCoeff使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CHandlingEntry的用法示例。
在下文中一共展示了CHandlingEntry::SetDragCoeff方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: SetVehicleHandling
void CHandlingRPCs::SetVehicleHandling ( CClientEntity* pSource, NetBitStreamInterface& bitStream )
{
// Check it's type
if ( pSource && pSource->GetType () == CCLIENTVEHICLE )
{
// Grab the vehicle handling entry
CClientVehicle& Vehicle = static_cast < CClientVehicle& > ( *pSource );
CHandlingEntry* pEntry = Vehicle.GetHandlingData();
CModelInfo * pModelInfo = Vehicle.GetModelInfo ( );
bool bReadSuspension = false;
if ( pModelInfo )
bReadSuspension = pModelInfo->IsCar ( ) || pModelInfo->IsMonsterTruck();
SVehicleHandlingSync handling;
bitStream.Read ( &handling );
pEntry->SetMass ( handling.data.fMass );
pEntry->SetTurnMass ( handling.data.fTurnMass );
pEntry->SetDragCoeff ( handling.data.fDragCoeff );
pEntry->SetCenterOfMass ( handling.data.vecCenterOfMass );
pEntry->SetPercentSubmerged ( handling.data.ucPercentSubmerged );
pEntry->SetTractionMultiplier ( handling.data.fTractionMultiplier );
pEntry->SetCarDriveType ( (CHandlingEntry::eDriveType)handling.data.ucDriveType );
pEntry->SetCarEngineType ( (CHandlingEntry::eEngineType)handling.data.ucEngineType );
pEntry->SetNumberOfGears ( handling.data.ucNumberOfGears );
pEntry->SetEngineAcceleration ( handling.data.fEngineAcceleration );
pEntry->SetEngineInertia ( handling.data.fEngineInertia );
pEntry->SetMaxVelocity ( handling.data.fMaxVelocity );
pEntry->SetBrakeDeceleration ( handling.data.fBrakeDeceleration );
pEntry->SetBrakeBias ( handling.data.fBrakeBias );
pEntry->SetABS ( handling.data.bABS );
pEntry->SetSteeringLock ( handling.data.fSteeringLock );
pEntry->SetTractionLoss ( handling.data.fTractionLoss );
pEntry->SetTractionBias ( handling.data.fTractionBias );
if ( bReadSuspension )
{
pEntry->SetSuspensionForceLevel ( handling.data.fSuspensionForceLevel );
pEntry->SetSuspensionDamping ( handling.data.fSuspensionDamping );
pEntry->SetSuspensionHighSpeedDamping ( handling.data.fSuspensionHighSpdDamping );
pEntry->SetSuspensionUpperLimit ( handling.data.fSuspensionUpperLimit );
pEntry->SetSuspensionLowerLimit ( handling.data.fSuspensionLowerLimit );
pEntry->SetSuspensionFrontRearBias ( handling.data.fSuspensionFrontRearBias );
pEntry->SetSuspensionAntiDiveMultiplier ( handling.data.fSuspensionAntiDiveMultiplier );
}
pEntry->SetCollisionDamageMultiplier ( handling.data.fCollisionDamageMultiplier );
pEntry->SetModelFlags ( handling.data.uiModelFlags );
pEntry->SetHandlingFlags ( handling.data.uiHandlingFlags );
pEntry->SetSeatOffsetDistance ( handling.data.fSeatOffsetDistance );
//pEntry->SetMonetary ( handling.data.uiMonetary );
//pEntry->SetHeadLight ( (CHandlingEntry::eLightType)handling.data.ucHeadLight );
//pEntry->SetTailLight ( (CHandlingEntry::eLightType)handling.data.ucTailLight );
//pEntry->SetAnimGroup ( handling.data.ucAnimGroup );
Vehicle.ApplyHandling();
}
}示例2: SetDragCoeff
void CClientHandling::SetDragCoeff ( float fDrag, bool bRestore )
{
// Set the property
m_fDragCoeff = fDrag;
m_bDragCoeffChanged = !bRestore;
// Loop through the vehicles we're default for
std::list < eVehicleTypes > ::const_iterator iter = m_DefaultTo.begin ();
for ( ; iter != m_DefaultTo.end (); iter++ )
{
// Grab the handling for this car
CHandlingEntry* pEntry = g_pGame->GetHandlingManager ()->GetHandlingData ( *iter );
if ( pEntry )
{
// Grab the handlings attached to that car
std::vector < CClientHandling* > List;
m_pHandlingManager->GetDefaultHandlings ( *iter, List );
// Update the property for this vehicle kind
pEntry->SetDragCoeff ( m_pHandlingManager->GetDragCoeff ( List, *iter ) );
pEntry->Recalculate ();
}
}
}示例3: SetVehicleHandlingProperty
void CHandlingRPCs::SetVehicleHandlingProperty ( CClientEntity* pSource, NetBitStreamInterface& bitStream )
{
// Read out the property id
unsigned char ucProperty;
if ( bitStream.Read ( ucProperty ) )
{
// Check its type
if ( pSource && pSource->GetType () == CCLIENTVEHICLE )
{
// Grab the vehicle handling entry
CClientVehicle& vehicle = static_cast < CClientVehicle& > ( *pSource );
CHandlingEntry* pHandlingEntry = vehicle.GetHandlingData ( );
CModelInfo * pModelInfo = vehicle.GetModelInfo ( );
bool bReadSuspension = false;
if ( pModelInfo )
bReadSuspension = pModelInfo->IsCar ( ) || pModelInfo->IsMonsterTruck ( );
// Temporary storage for reading out data
union
{
unsigned char ucChar;
unsigned int uiInt;
float fFloat;
};
// Depending on what property
switch ( ucProperty )
{
case HANDLING_MASS:
bitStream.Read ( fFloat );
pHandlingEntry->SetMass ( fFloat );
break;
case HANDLING_TURNMASS:
bitStream.Read ( fFloat );
pHandlingEntry->SetTurnMass ( fFloat );
break;
case HANDLING_DRAGCOEFF:
bitStream.Read ( fFloat );
pHandlingEntry->SetDragCoeff ( fFloat );
break;
case HANDLING_CENTEROFMASS:
{
CVector vecVector;
bitStream.Read ( vecVector.fX );
bitStream.Read ( vecVector.fY );
bitStream.Read ( vecVector.fZ );
pHandlingEntry->SetCenterOfMass ( vecVector );
break;
}
case HANDLING_PERCENTSUBMERGED:
bitStream.Read ( uiInt );
pHandlingEntry->SetPercentSubmerged ( uiInt );
break;
case HANDLING_TRACTIONMULTIPLIER:
bitStream.Read ( fFloat );
pHandlingEntry->SetTractionMultiplier ( fFloat );
break;
case HANDLING_DRIVETYPE:
{
bitStream.Read ( ucChar );
if ( ucChar != CHandlingEntry::FOURWHEEL &&
ucChar != CHandlingEntry::RWD &&
ucChar != CHandlingEntry::FWD )
{
ucChar = CHandlingEntry::RWD;
}
pHandlingEntry->SetCarDriveType ( static_cast < CHandlingEntry::eDriveType > ( ucChar ) );
break;
}
case HANDLING_ENGINETYPE:
{
bitStream.Read ( ucChar );
if ( ucChar != CHandlingEntry::DIESEL &&
ucChar != CHandlingEntry::ELECTRIC &&
ucChar != CHandlingEntry::PETROL )
{
ucChar = CHandlingEntry::PETROL;
}
pHandlingEntry->SetCarEngineType ( static_cast < CHandlingEntry::eEngineType > ( ucChar ) );
break;
}
case HANDLING_NUMOFGEARS:
bitStream.Read ( ucChar );
pHandlingEntry->SetNumberOfGears ( ucChar );
break;
case HANDLING_ENGINEACCELERATION:
bitStream.Read ( fFloat );
pHandlingEntry->SetEngineAcceleration ( fFloat );
//.........这里部分代码省略.........
示例4: RestoreVehicleHandlingProperty
void CHandlingRPCs::RestoreVehicleHandlingProperty ( CClientEntity* pSource, NetBitStreamInterface& bitStream )
{
// Read out the property id
unsigned char ucProperty;
if ( bitStream.Read ( ucProperty ) )
{
// Check its type
if ( pSource && pSource->GetType () == CCLIENTVEHICLE )
{
// Grab the vehicle handling entry and the original handling
CClientVehicle& Vehicle = static_cast < CClientVehicle& > ( *pSource );
CHandlingEntry* pHandlingEntry = Vehicle.GetHandlingData ();
const CHandlingEntry* pOriginalEntry = Vehicle.GetOriginalHandlingData ();
if ( ucProperty >= HANDLING_SUSPENSION_FORCELEVEL && ucProperty <= HANDLING_SUSPENSION_ANTIDIVEMULTIPLIER &&
( Vehicle.GetModelInfo()->IsCar ( ) || Vehicle.GetModelInfo()->IsMonsterTruck ( ) ) )
{
return;
}
if ( pOriginalEntry )
{
// Depending on what property
switch ( ucProperty )
{
case HANDLING_MASS:
pHandlingEntry->SetMass ( pOriginalEntry->GetMass () );
break;
case HANDLING_TURNMASS:
pHandlingEntry->SetTurnMass ( pOriginalEntry->GetTurnMass () );
break;
case HANDLING_DRAGCOEFF:
pHandlingEntry->SetDragCoeff ( pOriginalEntry->GetDragCoeff () );
break;
case HANDLING_CENTEROFMASS:
pHandlingEntry->SetCenterOfMass ( pOriginalEntry->GetCenterOfMass () );
break;
case HANDLING_PERCENTSUBMERGED:
pHandlingEntry->SetPercentSubmerged ( pOriginalEntry->GetPercentSubmerged () );
break;
case HANDLING_TRACTIONMULTIPLIER:
pHandlingEntry->SetTractionMultiplier ( pOriginalEntry->GetTractionMultiplier () );
break;
case HANDLING_DRIVETYPE:
pHandlingEntry->SetCarDriveType ( pOriginalEntry->GetCarDriveType () );
break;
case HANDLING_ENGINETYPE:
pHandlingEntry->SetCarEngineType ( pOriginalEntry->GetCarEngineType () );
break;
case HANDLING_NUMOFGEARS:
pHandlingEntry->SetNumberOfGears ( pOriginalEntry->GetNumberOfGears () );
break;
case HANDLING_ENGINEACCELERATION:
pHandlingEntry->SetEngineAcceleration ( pOriginalEntry->GetEngineAcceleration () );
break;
case HANDLING_ENGINEINERTIA:
pHandlingEntry->SetEngineInertia ( pOriginalEntry->GetEngineInertia () );
break;
case HANDLING_MAXVELOCITY:
pHandlingEntry->SetMaxVelocity ( pOriginalEntry->GetMaxVelocity () );
break;
case HANDLING_BRAKEDECELERATION:
pHandlingEntry->SetBrakeDeceleration ( pOriginalEntry->GetBrakeDeceleration () );
break;
case HANDLING_BRAKEBIAS:
pHandlingEntry->SetBrakeBias ( pOriginalEntry->GetBrakeBias () );
break;
case HANDLING_ABS:
pHandlingEntry->SetABS ( pOriginalEntry->GetABS () );
break;
case HANDLING_STEERINGLOCK:
pHandlingEntry->SetSteeringLock ( pOriginalEntry->GetSteeringLock () );
break;
case HANDLING_TRACTIONLOSS:
pHandlingEntry->SetTractionLoss ( pOriginalEntry->GetTractionLoss () );
break;
case HANDLING_TRACTIONBIAS:
pHandlingEntry->SetTractionBias ( pOriginalEntry->GetTractionBias () );
break;
case HANDLING_SUSPENSION_FORCELEVEL:
pHandlingEntry->SetSuspensionForceLevel ( pOriginalEntry->GetSuspensionForceLevel () );
break;
case HANDLING_SUSPENSION_DAMPING:
//.........这里部分代码省略.........