C++ BinaryOperator::getOpcode方法代码示例

/// ReassociateInst - Inspect and reassociate the instruction at the
/// given position, post-incrementing the position.
void Reassociate::ReassociateInst(BasicBlock::iterator &BBI) {
  Instruction *BI = BBI++;
  if (BI->getOpcode() == Instruction::Shl &&
      isa<ConstantInt>(BI->getOperand(1)))
    if (Instruction *NI = ConvertShiftToMul(BI, ValueRankMap)) {
      MadeChange = true;
      BI = NI;
    }

  // Reject cases where it is pointless to do this.
  if (!isa<BinaryOperator>(BI) || BI->getType()->isFloatingPointTy() || 
      BI->getType()->isVectorTy())
    return;  // Floating point ops are not associative.

  // Do not reassociate boolean (i1) expressions.  We want to preserve the
  // original order of evaluation for short-circuited comparisons that
  // SimplifyCFG has folded to AND/OR expressions.  If the expression
  // is not further optimized, it is likely to be transformed back to a
  // short-circuited form for code gen, and the source order may have been
  // optimized for the most likely conditions.
  if (BI->getType()->isIntegerTy(1))
    return;

  // If this is a subtract instruction which is not already in negate form,
  // see if we can convert it to X+-Y.
  if (BI->getOpcode() == Instruction::Sub) {
    if (ShouldBreakUpSubtract(BI)) {
      BI = BreakUpSubtract(BI, ValueRankMap);
      // Reset the BBI iterator in case BreakUpSubtract changed the
      // instruction it points to.
      BBI = BI;
      ++BBI;
      MadeChange = true;
    } else if (BinaryOperator::isNeg(BI)) {
      // Otherwise, this is a negation.  See if the operand is a multiply tree
      // and if this is not an inner node of a multiply tree.
      if (isReassociableOp(BI->getOperand(1), Instruction::Mul) &&
          (!BI->hasOneUse() ||
           !isReassociableOp(BI->use_back(), Instruction::Mul))) {
        BI = LowerNegateToMultiply(BI, ValueRankMap);
        MadeChange = true;
      }
    }
  }

  // If this instruction is a commutative binary operator, process it.
  if (!BI->isAssociative()) return;
  BinaryOperator *I = cast<BinaryOperator>(BI);

  // If this is an interior node of a reassociable tree, ignore it until we
  // get to the root of the tree, to avoid N^2 analysis.
  if (I->hasOneUse() && isReassociableOp(I->use_back(), I->getOpcode()))
    return;

  // If this is an add tree that is used by a sub instruction, ignore it 
  // until we process the subtract.
  if (I->hasOneUse() && I->getOpcode() == Instruction::Add &&
      cast<Instruction>(I->use_back())->getOpcode() == Instruction::Sub)
    return;

  ReassociateExpression(I);
}

/// HandleFloatingPointIV - If the loop has floating induction variable
/// then insert corresponding integer induction variable if possible.
/// For example,
/// for(double i = 0; i < 10000; ++i)
///   bar(i)
/// is converted into
/// for(int i = 0; i < 10000; ++i)
///   bar((double)i);
///
void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PN) {
  unsigned IncomingEdge = L->contains(PN->getIncomingBlock(0));
  unsigned BackEdge     = IncomingEdge^1;

  // Check incoming value.
  ConstantFP *InitValueVal =
    dyn_cast<ConstantFP>(PN->getIncomingValue(IncomingEdge));

  int64_t InitValue;
  if (!InitValueVal || !ConvertToSInt(InitValueVal->getValueAPF(), InitValue))
    return;

  // Check IV increment. Reject this PN if increment operation is not
  // an add or increment value can not be represented by an integer.
  BinaryOperator *Incr =
    dyn_cast<BinaryOperator>(PN->getIncomingValue(BackEdge));
  if (Incr == 0 || Incr->getOpcode() != Instruction::FAdd) return;
  
  // If this is not an add of the PHI with a constantfp, or if the constant fp
  // is not an integer, bail out.
  ConstantFP *IncValueVal = dyn_cast<ConstantFP>(Incr->getOperand(1));
  int64_t IncValue;
  if (IncValueVal == 0 || Incr->getOperand(0) != PN ||
      !ConvertToSInt(IncValueVal->getValueAPF(), IncValue))
    return;

  // Check Incr uses. One user is PN and the other user is an exit condition
  // used by the conditional terminator.
  Value::use_iterator IncrUse = Incr->use_begin();
  Instruction *U1 = cast<Instruction>(IncrUse++);
  if (IncrUse == Incr->use_end()) return;
  Instruction *U2 = cast<Instruction>(IncrUse++);
  if (IncrUse != Incr->use_end()) return;

  // Find exit condition, which is an fcmp.  If it doesn't exist, or if it isn't
  // only used by a branch, we can't transform it.
  FCmpInst *Compare = dyn_cast<FCmpInst>(U1);
  if (!Compare)
    Compare = dyn_cast<FCmpInst>(U2);
  if (Compare == 0 || !Compare->hasOneUse() ||
      !isa<BranchInst>(Compare->use_back()))
    return;
  
  BranchInst *TheBr = cast<BranchInst>(Compare->use_back());

  // We need to verify that the branch actually controls the iteration count
  // of the loop.  If not, the new IV can overflow and no one will notice.
  // The branch block must be in the loop and one of the successors must be out
  // of the loop.
  assert(TheBr->isConditional() && "Can't use fcmp if not conditional");
  if (!L->contains(TheBr->getParent()) ||
      (L->contains(TheBr->getSuccessor(0)) &&
       L->contains(TheBr->getSuccessor(1))))
    return;
  
  
  // If it isn't a comparison with an integer-as-fp (the exit value), we can't
  // transform it.
  ConstantFP *ExitValueVal = dyn_cast<ConstantFP>(Compare->getOperand(1));
  int64_t ExitValue;
  if (ExitValueVal == 0 ||
      !ConvertToSInt(ExitValueVal->getValueAPF(), ExitValue))
    return;
  
  // Find new predicate for integer comparison.
  CmpInst::Predicate NewPred = CmpInst::BAD_ICMP_PREDICATE;
  switch (Compare->getPredicate()) {
  default: return;  // Unknown comparison.
  case CmpInst::FCMP_OEQ:
  case CmpInst::FCMP_UEQ: NewPred = CmpInst::ICMP_EQ; break;
  case CmpInst::FCMP_ONE:
  case CmpInst::FCMP_UNE: NewPred = CmpInst::ICMP_NE; break;
  case CmpInst::FCMP_OGT:
  case CmpInst::FCMP_UGT: NewPred = CmpInst::ICMP_SGT; break;
  case CmpInst::FCMP_OGE:
  case CmpInst::FCMP_UGE: NewPred = CmpInst::ICMP_SGE; break;
  case CmpInst::FCMP_OLT:
  case CmpInst::FCMP_ULT: NewPred = CmpInst::ICMP_SLT; break;
  case CmpInst::FCMP_OLE:
  case CmpInst::FCMP_ULE: NewPred = CmpInst::ICMP_SLE; break;
  }
  
  // We convert the floating point induction variable to a signed i32 value if
  // we can.  This is only safe if the comparison will not overflow in a way
  // that won't be trapped by the integer equivalent operations.  Check for this
  // now.
  // TODO: We could use i64 if it is native and the range requires it.
  
  // The start/stride/exit values must all fit in signed i32.
  if (!isInt<32>(InitValue) || !isInt<32>(IncValue) || !isInt<32>(ExitValue))
    return;
//.........这里部分代码省略.........

bool AMDGPUCodeGenPrepare::isSigned(const BinaryOperator &I) const {
  return I.getOpcode() == Instruction::AShr ||
      I.getOpcode() == Instruction::SDiv || I.getOpcode() == Instruction::SRem;
}

 bool isRemainderWhenDevidingByTwo(Expr *expr)
 {
     BinaryOperator *binaryOperator = dyn_cast_or_null<BinaryOperator>(expr);
     return binaryOperator &&
         binaryOperator->getOpcode() == BO_Rem && isIntegerLiteral(binaryOperator->getRHS(), 2);
 }

void IndVarSimplify::EliminateIVRemainders() {
  SmallVector<WeakVH, 16> DeadInsts;

  // Look for SRem and URem users.
  for (IVUsers::iterator I = IU->begin(), E = IU->end(); I != E; ++I) {
    IVStrideUse &UI = *I;
    BinaryOperator *Rem = dyn_cast<BinaryOperator>(UI.getUser());
    if (!Rem) continue;

    bool isSigned = Rem->getOpcode() == Instruction::SRem;
    if (!isSigned && Rem->getOpcode() != Instruction::URem)
      continue;

    // We're only interested in the case where we know something about
    // the numerator.
    if (UI.getOperandValToReplace() != Rem->getOperand(0))
      continue;

    // Get the SCEVs for the ICmp operands.
    const SCEV *S = SE->getSCEV(Rem->getOperand(0));
    const SCEV *X = SE->getSCEV(Rem->getOperand(1));

    // Simplify unnecessary loops away.
    const Loop *ICmpLoop = LI->getLoopFor(Rem->getParent());
    S = SE->getSCEVAtScope(S, ICmpLoop);
    X = SE->getSCEVAtScope(X, ICmpLoop);

    // i % n  -->  i  if i is in [0,n).
    if ((!isSigned || SE->isKnownNonNegative(S)) &&
        SE->isKnownPredicate(isSigned ? ICmpInst::ICMP_SLT : ICmpInst::ICMP_ULT,
                             S, X))
      Rem->replaceAllUsesWith(Rem->getOperand(0));
    else {
      // (i+1) % n  -->  (i+1)==n?0:(i+1)  if i is in [0,n).
      const SCEV *LessOne =
        SE->getMinusSCEV(S, SE->getConstant(S->getType(), 1));
      if ((!isSigned || SE->isKnownNonNegative(LessOne)) &&
          SE->isKnownPredicate(isSigned ? ICmpInst::ICMP_SLT : ICmpInst::ICMP_ULT,
                               LessOne, X)) {
        ICmpInst *ICmp = new ICmpInst(Rem, ICmpInst::ICMP_EQ,
                                      Rem->getOperand(0), Rem->getOperand(1),
                                      "tmp");
        SelectInst *Sel =
          SelectInst::Create(ICmp,
                             ConstantInt::get(Rem->getType(), 0),
                             Rem->getOperand(0), "tmp", Rem);
        Rem->replaceAllUsesWith(Sel);
      } else
        continue;
    }

    // Inform IVUsers about the new users.
    if (Instruction *I = dyn_cast<Instruction>(Rem->getOperand(0)))
      IU->AddUsersIfInteresting(I);

    DEBUG(dbgs() << "INDVARS: Simplified rem: " << *Rem << '\n');
    DeadInsts.push_back(Rem);
  }

  // Now that we're done iterating through lists, clean up any instructions
  // which are now dead.
  while (!DeadInsts.empty())
    if (Instruction *Inst =
          dyn_cast_or_null<Instruction>(DeadInsts.pop_back_val()))
      RecursivelyDeleteTriviallyDeadInstructions(Inst);
}

//.........这里部分代码省略.........
    // Try to fold constant mul into select arguments.
    if (SelectInst *SI = dyn_cast<SelectInst>(Op0))
      if (Instruction *R = FoldOpIntoSelect(I, SI))
        return R;

    if (isa<PHINode>(Op0))
      if (Instruction *NV = FoldOpIntoPhi(I))
        return NV;

    // Canonicalize (X+C1)*CI -> X*CI+C1*CI.
    {
      Value *X;
      Constant *C1;
      if (match(Op0, m_OneUse(m_Add(m_Value(X), m_Constant(C1))))) {
        Value *Mul = Builder->CreateMul(C1, Op1);
        // Only go forward with the transform if C1*CI simplifies to a tidier
        // constant.
        if (!match(Mul, m_Mul(m_Value(), m_Value())))
          return BinaryOperator::CreateAdd(Builder->CreateMul(X, Op1), Mul);
      }
    }
  }

  if (Value *Op0v = dyn_castNegVal(Op0))     // -X * -Y = X*Y
    if (Value *Op1v = dyn_castNegVal(Op1))
      return BinaryOperator::CreateMul(Op0v, Op1v);

  // (X / Y) *  Y = X - (X % Y)
  // (X / Y) * -Y = (X % Y) - X
  {
    Value *Op1C = Op1;
    BinaryOperator *BO = dyn_cast<BinaryOperator>(Op0);
    if (!BO ||
        (BO->getOpcode() != Instruction::UDiv &&
         BO->getOpcode() != Instruction::SDiv)) {
      Op1C = Op0;
      BO = dyn_cast<BinaryOperator>(Op1);
    }
    Value *Neg = dyn_castNegVal(Op1C);
    if (BO && BO->hasOneUse() &&
        (BO->getOperand(1) == Op1C || BO->getOperand(1) == Neg) &&
        (BO->getOpcode() == Instruction::UDiv ||
         BO->getOpcode() == Instruction::SDiv)) {
      Value *Op0BO = BO->getOperand(0), *Op1BO = BO->getOperand(1);

      // If the division is exact, X % Y is zero, so we end up with X or -X.
      if (PossiblyExactOperator *SDiv = dyn_cast<PossiblyExactOperator>(BO))
        if (SDiv->isExact()) {
          if (Op1BO == Op1C)
            return ReplaceInstUsesWith(I, Op0BO);
          return BinaryOperator::CreateNeg(Op0BO);
        }

      Value *Rem;
      if (BO->getOpcode() == Instruction::UDiv)
        Rem = Builder->CreateURem(Op0BO, Op1BO);
      else
        Rem = Builder->CreateSRem(Op0BO, Op1BO);
      Rem->takeName(BO);

      if (Op1BO == Op1C)
        return BinaryOperator::CreateSub(Op0BO, Rem);
      return BinaryOperator::CreateSub(Rem, Op0BO);
    }
  }

bool AlignmentFromAssumptions::extractAlignmentInfo(CallInst *I,
                                 Value *&AAPtr, const SCEV *&AlignSCEV,
                                 const SCEV *&OffSCEV) {
  // An alignment assume must be a statement about the least-significant
  // bits of the pointer being zero, possibly with some offset.
  ICmpInst *ICI = dyn_cast<ICmpInst>(I->getArgOperand(0));
  if (!ICI)
    return false;

  // This must be an expression of the form: x & m == 0.
  if (ICI->getPredicate() != ICmpInst::ICMP_EQ)
    return false;

  // Swap things around so that the RHS is 0.
  Value *CmpLHS = ICI->getOperand(0);
  Value *CmpRHS = ICI->getOperand(1);
  const SCEV *CmpLHSSCEV = SE->getSCEV(CmpLHS);
  const SCEV *CmpRHSSCEV = SE->getSCEV(CmpRHS);
  if (CmpLHSSCEV->isZero())
    std::swap(CmpLHS, CmpRHS);
  else if (!CmpRHSSCEV->isZero())
    return false;

  BinaryOperator *CmpBO = dyn_cast<BinaryOperator>(CmpLHS);
  if (!CmpBO || CmpBO->getOpcode() != Instruction::And)
    return false;

  // Swap things around so that the right operand of the and is a constant
  // (the mask); we cannot deal with variable masks.
  Value *AndLHS = CmpBO->getOperand(0);
  Value *AndRHS = CmpBO->getOperand(1);
  const SCEV *AndLHSSCEV = SE->getSCEV(AndLHS);
  const SCEV *AndRHSSCEV = SE->getSCEV(AndRHS);
  if (isa<SCEVConstant>(AndLHSSCEV)) {
    std::swap(AndLHS, AndRHS);
    std::swap(AndLHSSCEV, AndRHSSCEV);
  }

  const SCEVConstant *MaskSCEV = dyn_cast<SCEVConstant>(AndRHSSCEV);
  if (!MaskSCEV)
    return false;

  // The mask must have some trailing ones (otherwise the condition is
  // trivial and tells us nothing about the alignment of the left operand).
  unsigned TrailingOnes =
    MaskSCEV->getValue()->getValue().countTrailingOnes();
  if (!TrailingOnes)
    return false;

  // Cap the alignment at the maximum with which LLVM can deal (and make sure
  // we don't overflow the shift).
  uint64_t Alignment;
  TrailingOnes = std::min(TrailingOnes,
    unsigned(sizeof(unsigned) * CHAR_BIT - 1));
  Alignment = std::min(1u << TrailingOnes, +Value::MaximumAlignment);

  Type *Int64Ty = Type::getInt64Ty(I->getParent()->getParent()->getContext());
  AlignSCEV = SE->getConstant(Int64Ty, Alignment);

  // The LHS might be a ptrtoint instruction, or it might be the pointer
  // with an offset.
  AAPtr = nullptr;
  OffSCEV = nullptr;
  if (PtrToIntInst *PToI = dyn_cast<PtrToIntInst>(AndLHS)) {
    AAPtr = PToI->getPointerOperand();
    OffSCEV = SE->getConstant(Int64Ty, 0);
  } else if (const SCEVAddExpr* AndLHSAddSCEV =
             dyn_cast<SCEVAddExpr>(AndLHSSCEV)) {
    // Try to find the ptrtoint; subtract it and the rest is the offset.
    for (SCEVAddExpr::op_iterator J = AndLHSAddSCEV->op_begin(),
         JE = AndLHSAddSCEV->op_end(); J != JE; ++J)
      if (const SCEVUnknown *OpUnk = dyn_cast<SCEVUnknown>(*J))
        if (PtrToIntInst *PToI = dyn_cast<PtrToIntInst>(OpUnk->getValue())) {
          AAPtr = PToI->getPointerOperand();
          OffSCEV = SE->getMinusSCEV(AndLHSAddSCEV, *J);
          break;
        }
  }

  if (!AAPtr)
    return false;

  // Sign extend the offset to 64 bits (so that it is like all of the other
  // expressions). 
  unsigned OffSCEVBits = OffSCEV->getType()->getPrimitiveSizeInBits();
  if (OffSCEVBits < 64)
    OffSCEV = SE->getSignExtendExpr(OffSCEV, Int64Ty);
  else if (OffSCEVBits > 64)
    return false;

  AAPtr = AAPtr->stripPointerCasts();
  return true;
}

/// HandleFloatingPointIV - If the loop has floating induction variable
/// then insert corresponding integer induction variable if possible.
/// For example,
/// for(double i = 0; i < 10000; ++i)
///   bar(i)
/// is converted into
/// for(int i = 0; i < 10000; ++i)
///   bar((double)i);
///
void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PH) {

  unsigned IncomingEdge = L->contains(PH->getIncomingBlock(0));
  unsigned BackEdge     = IncomingEdge^1;

  // Check incoming value.
  ConstantFP *InitValue = dyn_cast<ConstantFP>(PH->getIncomingValue(IncomingEdge));
  if (!InitValue) return;
  uint64_t newInitValue =
              Type::getInt32Ty(PH->getContext())->getPrimitiveSizeInBits();
  if (!convertToInt(InitValue->getValueAPF(), &newInitValue))
    return;

  // Check IV increment. Reject this PH if increment operation is not
  // an add or increment value can not be represented by an integer.
  BinaryOperator *Incr =
    dyn_cast<BinaryOperator>(PH->getIncomingValue(BackEdge));
  if (!Incr) return;
  if (Incr->getOpcode() != Instruction::FAdd) return;
  ConstantFP *IncrValue = NULL;
  unsigned IncrVIndex = 1;
  if (Incr->getOperand(1) == PH)
    IncrVIndex = 0;
  IncrValue = dyn_cast<ConstantFP>(Incr->getOperand(IncrVIndex));
  if (!IncrValue) return;
  uint64_t newIncrValue =
              Type::getInt32Ty(PH->getContext())->getPrimitiveSizeInBits();
  if (!convertToInt(IncrValue->getValueAPF(), &newIncrValue))
    return;

  // Check Incr uses. One user is PH and the other users is exit condition used
  // by the conditional terminator.
  Value::use_iterator IncrUse = Incr->use_begin();
  Instruction *U1 = cast<Instruction>(IncrUse++);
  if (IncrUse == Incr->use_end()) return;
  Instruction *U2 = cast<Instruction>(IncrUse++);
  if (IncrUse != Incr->use_end()) return;

  // Find exit condition.
  FCmpInst *EC = dyn_cast<FCmpInst>(U1);
  if (!EC)
    EC = dyn_cast<FCmpInst>(U2);
  if (!EC) return;

  if (BranchInst *BI = dyn_cast<BranchInst>(EC->getParent()->getTerminator())) {
    if (!BI->isConditional()) return;
    if (BI->getCondition() != EC) return;
  }

  // Find exit value. If exit value can not be represented as an integer then
  // do not handle this floating point PH.
  ConstantFP *EV = NULL;
  unsigned EVIndex = 1;
  if (EC->getOperand(1) == Incr)
    EVIndex = 0;
  EV = dyn_cast<ConstantFP>(EC->getOperand(EVIndex));
  if (!EV) return;
  uint64_t intEV = Type::getInt32Ty(PH->getContext())->getPrimitiveSizeInBits();
  if (!convertToInt(EV->getValueAPF(), &intEV))
    return;

  // Find new predicate for integer comparison.
  CmpInst::Predicate NewPred = CmpInst::BAD_ICMP_PREDICATE;
  switch (EC->getPredicate()) {
  case CmpInst::FCMP_OEQ:
  case CmpInst::FCMP_UEQ:
    NewPred = CmpInst::ICMP_EQ;
    break;
  case CmpInst::FCMP_OGT:
  case CmpInst::FCMP_UGT:
    NewPred = CmpInst::ICMP_UGT;
    break;
  case CmpInst::FCMP_OGE:
  case CmpInst::FCMP_UGE:
    NewPred = CmpInst::ICMP_UGE;
    break;
  case CmpInst::FCMP_OLT:
  case CmpInst::FCMP_ULT:
    NewPred = CmpInst::ICMP_ULT;
    break;
  case CmpInst::FCMP_OLE:
  case CmpInst::FCMP_ULE:
    NewPred = CmpInst::ICMP_ULE;
    break;
  default:
    break;
  }
  if (NewPred == CmpInst::BAD_ICMP_PREDICATE) return;

  // Insert new integer induction variable.
  PHINode *NewPHI = PHINode::Create(Type::getInt32Ty(PH->getContext()),
//.........这里部分代码省略.........

Instruction *InstCombiner::FoldShiftByConstant(Value *Op0, ConstantInt *Op1,
                                               BinaryOperator &I) {
  bool isLeftShift = I.getOpcode() == Instruction::Shl;


  // See if we can propagate this shift into the input, this covers the trivial
  // cast of lshr(shl(x,c1),c2) as well as other more complex cases.
  if (I.getOpcode() != Instruction::AShr &&
      CanEvaluateShifted(Op0, Op1->getZExtValue(), isLeftShift, *this)) {
    DEBUG(dbgs() << "ICE: GetShiftedValue propagating shift through expression"
              " to eliminate shift:\n  IN: " << *Op0 << "\n  SH: " << I <<"\n");

    return ReplaceInstUsesWith(I,
                 GetShiftedValue(Op0, Op1->getZExtValue(), isLeftShift, *this));
  }


  // See if we can simplify any instructions used by the instruction whose sole
  // purpose is to compute bits we don't care about.
  uint32_t TypeBits = Op0->getType()->getScalarSizeInBits();

  // shl i32 X, 32 = 0 and srl i8 Y, 9 = 0, ... just don't eliminate
  // a signed shift.
  //
  if (Op1->uge(TypeBits)) {
    if (I.getOpcode() != Instruction::AShr)
      return ReplaceInstUsesWith(I, Constant::getNullValue(Op0->getType()));
    // ashr i32 X, 32 --> ashr i32 X, 31
    I.setOperand(1, ConstantInt::get(I.getType(), TypeBits-1));
    return &I;
  }

  // ((X*C1) << C2) == (X * (C1 << C2))
  if (BinaryOperator *BO = dyn_cast<BinaryOperator>(Op0))
    if (BO->getOpcode() == Instruction::Mul && isLeftShift)
      if (Constant *BOOp = dyn_cast<Constant>(BO->getOperand(1)))
        return BinaryOperator::CreateMul(BO->getOperand(0),
                                        ConstantExpr::getShl(BOOp, Op1));

  // Try to fold constant and into select arguments.
  if (SelectInst *SI = dyn_cast<SelectInst>(Op0))
    if (Instruction *R = FoldOpIntoSelect(I, SI))
      return R;
  if (isa<PHINode>(Op0))
    if (Instruction *NV = FoldOpIntoPhi(I))
      return NV;

  // Fold shift2(trunc(shift1(x,c1)), c2) -> trunc(shift2(shift1(x,c1),c2))
  if (TruncInst *TI = dyn_cast<TruncInst>(Op0)) {
    Instruction *TrOp = dyn_cast<Instruction>(TI->getOperand(0));
    // If 'shift2' is an ashr, we would have to get the sign bit into a funny
    // place.  Don't try to do this transformation in this case.  Also, we
    // require that the input operand is a shift-by-constant so that we have
    // confidence that the shifts will get folded together.  We could do this
    // xform in more cases, but it is unlikely to be profitable.
    if (TrOp && I.isLogicalShift() && TrOp->isShift() &&
        isa<ConstantInt>(TrOp->getOperand(1))) {
      // Okay, we'll do this xform.  Make the shift of shift.
      Constant *ShAmt = ConstantExpr::getZExt(Op1, TrOp->getType());
      // (shift2 (shift1 & 0x00FF), c2)
      Value *NSh = Builder->CreateBinOp(I.getOpcode(), TrOp, ShAmt,I.getName());

      // For logical shifts, the truncation has the effect of making the high
      // part of the register be zeros.  Emulate this by inserting an AND to
      // clear the top bits as needed.  This 'and' will usually be zapped by
      // other xforms later if dead.
      unsigned SrcSize = TrOp->getType()->getScalarSizeInBits();
      unsigned DstSize = TI->getType()->getScalarSizeInBits();
      APInt MaskV(APInt::getLowBitsSet(SrcSize, DstSize));

      // The mask we constructed says what the trunc would do if occurring
      // between the shifts.  We want to know the effect *after* the second
      // shift.  We know that it is a logical shift by a constant, so adjust the
      // mask as appropriate.
      if (I.getOpcode() == Instruction::Shl)
        MaskV <<= Op1->getZExtValue();
      else {
        assert(I.getOpcode() == Instruction::LShr && "Unknown logical shift");
        MaskV = MaskV.lshr(Op1->getZExtValue());
      }

      // shift1 & 0x00FF
      Value *And = Builder->CreateAnd(NSh,
                                      ConstantInt::get(I.getContext(), MaskV),
                                      TI->getName());

      // Return the value truncated to the interesting size.
      return new TruncInst(And, I.getType());
    }
  }

  if (Op0->hasOneUse()) {
    if (BinaryOperator *Op0BO = dyn_cast<BinaryOperator>(Op0)) {
      // Turn ((X >> C) + Y) << C  ->  (X + (Y << C)) & (~0 << C)
      Value *V1, *V2;
      ConstantInt *CC;
      switch (Op0BO->getOpcode()) {
      default: break;
      case Instruction::Add:
      case Instruction::And:
//.........这里部分代码省略.........

bool RippleElimination::runOnFunction(Function &F) {
  std::vector<Instruction*> **RippleLists;
  unsigned ListID = 0;
  unsigned NumofLists = 0;

  RippleLists = new std::vector<Instruction*>*;
  RippleLists[ListID] = new std::vector<Instruction*>;
  RippleLists[ListID]->clear();

  //errs() << "RippleLists[0] size:" << RippleLists[0]->size() << "\n";

  for (Function::iterator BB = F.begin(), BE = F.end(); BB != BE; ++BB) {
    BasicBlock *BC = dyn_cast<BasicBlock>(BB); //==> how to get an identifier of a BB?
    for (BasicBlock::iterator IB = BB->begin(), IE = BB->end(); IB != IE; ++IB) {

      // The dyn_cast<> operator is a "checking cast" operation. It checks to
      // see if the operand is of the specified type, and if so, returns a
      // pointer to it (this operator does not work with references). If the
      // operand is not of the correct type, a null pointer is returned.
      Instruction *IT = dyn_cast<Instruction>(IB);
      Instruction *BackIT;
      ICmpInst * cmpinst = dyn_cast<ICmpInst>(IT);
      if(cmpinst!=NULL) { // If not a NULL pointer
	  	  errs()<< "!!!! In CMP Oh yeah!!!!"<<"\n";
	  switch(cmpinst->getPredicate()){
	  case ICmpInst::ICMP_SLE: 
	      {
		  errs()<<"QQQQ SLE\n";
	      }
	      break;
	  case ICmpInst::ICMP_SLT:
	      {

		  Value *op0 = IT->getOperand(0);
		  Instruction * op0_inst =  dyn_cast<Instruction> (op0);
		  Value *op0_op1 = op0_inst->getOperand(1);
		  ConstantInt *op0_op1_const = dyn_cast<ConstantInt>(op0_op1);
		  APInt b = op0_op1_const->getValue();

		  ConstantInt *op1 = dyn_cast<ConstantInt>(IT->getOperand(1));

		  APInt  a = op1->getValue(); 
		  errs() << "CMP Value0 ::" << b.getLimitedValue() << "\n";
		  errs() << "CMP Value1 ::" << a.getLimitedValue() << "\n";
		  int aa = a.getLimitedValue();
		  int bb = b.getLimitedValue();

		  // errs()<<a.getBitWidth()<<"\n";

		  errs()<<"The flag adder should be "<<(int)ceil(log(aa)/log(2))<<" bit adder\n";
		  errs()<<"QQQQ SLT\n";
	      }
	      break;
	  default: 
	      break;
	  }

      }
      // Get Binary Operator Instruction::Add
      if(dyn_cast<BinaryOperator>(IT)) { // If not a NULL pointer
        BinaryOperator* Inst = dyn_cast<BinaryOperator>(IT);

//	errs()<<"Zhuangh put: "<<Inst->getOpcode()<<"\n";

        if (Inst->getOpcode() == Instruction::Add) {
          Value *Op0 = IT->getOperand(0);
          Value *Op1 = IT->getOperand(1);

          //errs() << "Add Value0 ::" << *Op0 << "\n";
          //errs() << "Add Value1 ::" << *Op1 << "\n";
          if(RippleLists[0]->empty()) {
            RippleLists[0]->push_back(IT);
          }
          else {
            BackIT = dyn_cast<Instruction>(RippleLists[0]->back());
            //errs() << "BackIT :" << *BackIT << "\n";
            if(BackIT->getName().equals(Op0->getName()) || BackIT->getName().equals(Op1->getName())) {
              RippleLists[0]->push_back(IT);
            }
          }
        }
      }
    } // End Instruction iterator

    if(RippleLists[0]->size() < 2) RippleLists[0]->clear(); // No ripple detected

    for(std::vector<Instruction*>::iterator RplIT = RippleLists[0]->begin(); RplIT != RippleLists[0]->end(); ++RplIT){
      Instruction *Inst = dyn_cast<Instruction>(*RplIT);
      errs() << "Ripple Operations:" << *Inst << "\n";
      //errs() << "Name:" << Inst->getName().str() << " ";
      //errs() << "Op0:" << Inst->getOperand(0)->getName().str() << " ";
      //errs() << "Op1:" << Inst->getOperand(1)->getName().str() << "\n";
      //It->eraseFromParent();
    }
    //errs() << "RippleLists[0] size:" << RippleLists[0]->size() << "\n";
    errs() << "\n";
    RippleLists[0]->clear();
  } // End basic block iterator

  return true;
//.........这里部分代码省略.........