Python Match.set_ip_proto方法代码示例

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]
 #                   IP ECN
 #                   IPv6 Source Address
 #                   IPv6 Destination Address
 #                   IPv6 Flow Label
 #                   IP protocol number (ICMPv6)
 #                   ICMPv6 Type
 #                   ICMPv6 Code
 #                   Metadata
 match = Match()    
 match.set_eth_type(eth_type)
 match.set_ip_dscp(ip_dscp)
 match.set_ip_ecn(ip_ecn)
 match.set_ipv6_src(ipv6_src)
 match.set_ipv6_dst(ipv6_dst)
 match.set_ipv6_flabel(ipv6_flabel)
 match.set_ip_proto(ip_proto)
 match.set_icmpv6_type(icmpv6_type)
 match.set_icmpv6_code(icmpv6_code)
 match.set_metadata(metadata)
 flow_entry.add_match(match)
 
 
 print ("\n")
 print ("<<< Flow to send:")
 print flow_entry.get_payload()
 time.sleep(rundelay)
 result = ofswitch.add_modify_flow(flow_entry)
 status = result.get_status()   
 if(status.eq(STATUS.OK) == True):
     print ("<<< Flow successfully added to the Controller")
 else:

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]
def of_demo_18():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 18 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")



    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 IPv6 Source Address
    #                 IPv6 Destination Address
    #                 IP DSCP
    #                 TCP Source Port
    #                 TCP Destination Port
    eth_type = ETH_TYPE_IPv6
    ipv6_src = "2001::2acf:e9ff:fe21:6431/80"
    ipv6_dst = "2004:1234:2acf:e9ff::fe21:6431/64"
    ip_dscp = IP_DSCP_CS1  # 'Class Selector' = 'Priority'
    ip_proto = IP_PROTO_TCP
    tcp_src_port = 12345
    tcp_dst_port = 54321

    # --- Flow Actions: Output (CONTROLLER)
    output_port = "CONTROLLER"

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
           % (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                IPv6 Source Address (%s)\n"
           "                IPv6 Destination Address (%s)\n"
           "                IP DSCP (%s)\n"
           "                TCP Source Port (%s)\n"
           "                TCP Destination Port (%s)"
           % (hex(eth_type), ipv6_src, ipv6_dst,
              ip_dscp, tcp_src_port, tcp_dst_port))
    print ("        Action: Output (to %s)"
           % (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    flow_entry.set_flow_name(flow_name="demo18.py")
    table_id = 0
    flow_id = 24
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_hard_timeout(0)
    flow_entry.set_flow_idle_timeout(0)
    flow_entry.set_flow_priority(flow_priority=1017)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Output'
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   IPv6 Source Address
    #                   IPv6 Destination Address
    #                   IP protocol number (TCP)
    #                   IP DSCP
    #                   TCP Source Port
    #                   TCP Destination Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_ipv6_src(ipv6_src)
    match.set_ipv6_dst(ipv6_dst)
    match.set_ip_proto(ip_proto)
    match.set_ip_dscp(ip_dscp)
    match.set_tcp_src_port(tcp_src_port)
    match.set_tcp_dst_port(tcp_dst_port)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]

#.........这里部分代码省略.........
           "                ICMPv4 Type (%s)\n"
           "                ICMPv4 Code (%s)\n"
           "                Input Port (%s)"
           % (hex(eth_type), eth_src,
              eth_dst, ipv4_src, ipv4_dst,
              ip_proto, ip_dscp, ip_ecn,
              icmpv4_type, icmpv4_code,
              input_port))
    print ("        Action: Output (NORMAL)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 18
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_hard_timeout(0)
    flow_entry.set_flow_idle_timeout(0)
    flow_entry.set_flow_priority(1009)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' NORMAL
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="NORMAL")
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   IPv4 Source Address
    #                   IPv4 Destination Address
    #                   IP Protocol Number
    #                   IP DSCP
    #                   IP ECN
    #                   ICMPv4 Type
    #                   ICMPv4 Code
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_ipv4_src(ipv4_src)
    match.set_ipv4_dst(ipv4_dst)
    match.set_ip_proto(ip_proto)
    match.set_ip_dscp(ip_dscp)
    match.set_ip_ecn(ip_ecn)
    match.set_icmpv4_type(icmpv4_type)
    match.set_icmpv4_code(icmpv4_code)
    match.set_in_port(input_port)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
    result = ofswitch.get_configured_flow(table_id, flow_id)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully read from the Controller")
        print ("Flow info:")
        flow = result.get_data()
        print json.dumps(flow, indent=4)
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Delete flow with id of '%s' from the Controller's cache "
           "and from the table '%s' on the '%s' node"
           % (flow_id, table_id, nodeName))
    time.sleep(rundelay)
    result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
                                  flow_entry.get_flow_id())
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully removed from the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
    print (">>> Demo End")
    print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]

#.........这里部分代码省略.........

    action_order = 0
    action = SetNwSrcAction(action_order)
    action.set_nw_src(act_mod_ipv4_src_addr)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetNwDstAction(action_order)
    action.set_nw_dst(act_mod_ipv4_dst_addr)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetTpSrcAction(action_order)
    action.set_tp_src(act_mod_tcp_src_port)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetTpDstAction(action_order)
    action.set_tp_dst(act_mod_tcp_dst_port)
    instruction.add_apply_action(action)

    action_order += 1
    action = OutputAction(action_order)
    action.set_outport(act_out_port)
    instruction.add_apply_action(action)

    flow_entry1.add_instruction(instruction)

    # Match Fields for the Flow Entry
    match = Match()

    match.set_in_port(match_in_port)
    match.set_eth_type(match_eth_type)
    match.set_ip_proto(match_ip_proto)
    match.set_ipv4_src(match_ipv4_src_addr)
    match.set_ipv4_dst(match_ipv4_dst_addr)
    match.set_tcp_dst_port(match_tcp_dst_port)

    flow_entry1.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry1.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry1)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.detailed())
        delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
        exit(0)

    # ---------------------------------------------------
    # Second flow entry
    # ---------------------------------------------------
    table_id = 0
    flow_id += 1
    flow_name = "Modify IP packet example2"
    priority = 900
    cookie = 1300

    match_in_port = 110
    match_eth_type = ETH_TYPE_IPv4
    match_ip_proto = IP_PROTO_UDP

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]
def of_demo_8():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 8 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")



    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Source Address
    #                 Ethernet Destination Address
    #                 IPv4 Source Address
    #                 IPv4 Destination Address
    #                 IP Protocol Number
    #                 IP DSCP
    #                 Input Port
    #     NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
    eth_type = ETH_TYPE_IPv4
    eth_src = "00:1c:01:00:23:aa"
    eth_dst = "00:02:02:60:ff:fe"
    ipv4_src = "10.0.245.1/24"
    ipv4_dst = "192.168.1.123/16"
    ip_proto = IP_PROTO_TLSP
    ip_dscp = IP_DSCP_CS3  # 'Class Selector' = 'Flash'
    input_port = 13

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
           % (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Ethernet Source Address (%s)\n"
           "                Ethernet Destination Address (%s)\n"
           "                IPv4 Source Address (%s)\n"
           "                IPv4 Destination Address (%s)\n"
           "                IP Protocol Number (%s)\n"
           "                IP DSCP (%s)\n"
           "                Input Port (%s)"
           % (hex(eth_type), eth_src,
              eth_dst, ipv4_src, ipv4_dst,
              ip_proto, ip_dscp,
              input_port))
    print ("        Action: Output (CONTROLLER)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 15
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1006)
    flow_entry.set_flow_cookie(cookie=100)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' to CONTROLLER
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="CONTROLLER", max_len=60)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   IPv4 Source Address
    #                   IPv4 Destination Address
    #                   IP Protocol Number
    #                   IP DSCP
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_ipv4_src(ipv4_src)
    match.set_ipv4_dst(ipv4_dst)
    match.set_ip_proto(ip_proto)
    match.set_ip_dscp(ip_dscp)
    match.set_in_port(input_port)
    flow_entry.add_match(match)

#.........这里部分代码省略.........

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]

#.........这里部分代码省略.........
           "                IP DSCP (%s)\n"
           "                TCP Source Port Number (%s)\n"
           "                TCP Destination Port Number (%s)\n"
           "                Input Port (%s)" %
           (hex(eth_type), eth_src,
            eth_dst, ipv4_src, ipv4_dst,
            ip_proto, ip_dscp,
            tcp_src_port, tcp_dst_port,
            input_port))
    print ("        Action: Output (NORMAL)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 16
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1007)
    flow_entry.set_flow_cookie(cookie=101)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' NORMAL
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="NORMAL")
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   IPv4 Source Address
    #                   IPv4 Destination Address
    #                   IP Protocol Number
    #                   IP DSCP
    #                   IP ECN
    #                   TCP Source Port Number
    #                   TCP Destination Port Number
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_ipv4_src(ipv4_src)
    match.set_ipv4_dst(ipv4_dst)
    match.set_ip_proto(ip_proto)
    match.set_ip_dscp(ip_dscp)
    match.set_tcp_src(tcp_src_port)
    match.set_tcp_dst(tcp_dst_port)
    match.set_in_port(input_port)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
    result = ofswitch.get_configured_flow(table_id, flow_id)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully read from the Controller")
        print ("Flow info:")
        flow = result.get_data()
        print json.dumps(flow, indent=4)
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Delete flow with id of '%s' from the Controller's cache "
           "and from the table '%s' on the '%s' node" %
           (flow_id, table_id, nodeName))
    time.sleep(rundelay)
    result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
                                  flow_entry.get_flow_id())
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully removed from the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
    print (">>> Demo End")
    print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_ip_proto [as 别名]

#.........这里部分代码省略.........
           "                IPv6 Flow Label (%s)\n"
           "                ICMPv6 Type (%s)\n"
           "                ICMPv6 Code (%s)\n"
           "                Metadata (%s)" %
           (hex(eth_type), ip_dscp, ip_ecn,
            ipv6_src, ipv6_dst, ipv6_flabel,
            icmpv6_type, icmpv6_code, metadata))
    print ("        Action: Output (to %s)" % (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_id = 26
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_name(flow_name="demo20.py")
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1019)
    flow_entry.set_flow_cookie(cookie=250)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=1200)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Output'
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   IP DSCP
    #                   IP ECN
    #                   IPv6 Source Address
    #                   IPv6 Destination Address
    #                   IPv6 Flow Label
    #                   IP protocol number (ICMPv6)
    #                   ICMPv6 Type
    #                   ICMPv6 Code
    #                   Metadata
    match = Match()
    match.set_eth_type(eth_type)
    match.set_ip_dscp(ip_dscp)
    match.set_ip_ecn(ip_ecn)
    match.set_ipv6_src(ipv6_src)
    match.set_ipv6_dst(ipv6_dst)
    match.set_ipv6_flabel(ipv6_flabel)
    match.set_ip_proto(ip_proto)
    match.set_icmpv6_type(icmpv6_type)
    match.set_icmpv6_code(icmpv6_code)
    match.set_metadata(metadata)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
    result = ofswitch.get_configured_flow(table_id, flow_id)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully read from the Controller")
        print ("Flow info:")
        flow = result.get_data()
        print json.dumps(flow, indent=4)
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Delete flow with id of '%s' from the Controller's cache "
           "and from the table '%s' on the '%s' node" %
           (flow_id, table_id, nodeName))
    time.sleep(rundelay)
    result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
                                  flow_entry.get_flow_id())
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully removed from the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
    print (">>> Demo End")
    print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")