当前位置: 首页>>代码示例>>Python>>正文


Python Match.set_arp_tgt_hw_address方法代码示例

本文整理汇总了Python中pybvc.openflowdev.ofswitch.Match.set_arp_tgt_hw_address方法的典型用法代码示例。如果您正苦于以下问题:Python Match.set_arp_tgt_hw_address方法的具体用法?Python Match.set_arp_tgt_hw_address怎么用?Python Match.set_arp_tgt_hw_address使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在pybvc.openflowdev.ofswitch.Match的用法示例。


在下文中一共展示了Match.set_arp_tgt_hw_address方法的2个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Python代码示例。

示例1: of_demo_12

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_arp_tgt_hw_address [as 别名]
def of_demo_12():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 12 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Source Address
    #                 Ethernet Destination Address
    #                 ARP Operation
    #                 ARP Source IPv4 Address
    #                 ARP Target IPv4 Address
    #                 ARP source hardware address
    #                 ARP target hardware address
    #     NOTE: Ethernet type MUST be 2054 (0x0806) -> ARP protocol
    eth_type = ETH_TYPE_ARP
    eth_src = "00:ab:fe:01:03:31"
    eth_dst = "ff:ff:ff:ff:ff:ff"
    arp_opcode = ARP_REQUEST
    arp_src_ipv4_addr = "192.168.4.1/32"
    arp_tgt_ipv4_addr = "10.21.22.23/32"
    arp_src_hw_addr = "12:34:56:78:98:ab"
    arp_tgt_hw_addr = "fe:dc:ba:98:76:54"

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Ethernet Source Address (%s)\n"
           "                Ethernet Destination Address (%s)\n"
           "                ARP Operation (%s)\n"
           "                ARP Source IPv4 Address (%s)\n"
           "                ARP Target IPv4 Address (%s)\n"
           "                ARP Source Hardware Address (%s)\n"
           "                ARP Target Hardware Address (%s)" %
           (hex(eth_type), eth_src,
            eth_dst, arp_opcode,
            arp_src_ipv4_addr,
            arp_tgt_ipv4_addr,
            arp_src_hw_addr,
            arp_tgt_hw_addr))
    print ("        Action: Output (CONTROLLER)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 19
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_hard_timeout(0)
    flow_entry.set_flow_idle_timeout(0)
    flow_entry.set_flow_priority(1010)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' CONTROLLER
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="CONTROLLER")
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   ARP Operation
    #                   ARP Source IPv4 Address
    #                   ARP Target IPv4 Address
    #                   ARP Source Hardware Address
    #                   ARP Target Hardware Address
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_arp_opcode(arp_opcode)
    match.set_arp_src_transport_address(arp_src_ipv4_addr)
    match.set_arp_tgt_transport_address(arp_tgt_ipv4_addr)
    match.set_arp_src_hw_address(arp_src_hw_addr)
    match.set_arp_tgt_hw_address(arp_tgt_hw_addr)
    flow_entry.add_match(match)

#.........这里部分代码省略.........
开发者ID:BillTheBest,项目名称:pybvc,代码行数:103,代码来源:demo12.py

示例2: Match

# 需要导入模块: from pybvc.openflowdev.ofswitch import Match [as 别名]
# 或者: from pybvc.openflowdev.ofswitch.Match import set_arp_tgt_hw_address [as 别名]
 #                   Ethernet Source Address
 #                   Ethernet Destination Address
 #                   ARP Operation 
 #                   ARP Source IPv4 Address 
 #                   ARP Target IPv4 Address
 #                   ARP Source Hardware Address
 #                   ARP Target Hardware Address
 match = Match()    
 match.set_eth_type(eth_type)
 match.set_eth_src(eth_src)
 match.set_eth_dst(eth_dst)
 match.set_arp_opcode(arp_opcode)
 match.set_arp_src_transport_address(arp_src_ipv4_addr)
 match.set_arp_tgt_transport_address(arp_tgt_ipv4_addr)
 match.set_arp_src_hw_address(arp_src_hw_addr)
 match.set_arp_tgt_hw_address(arp_tgt_hw_addr)
 flow_entry.add_match(match)
 
 
 print ("\n")
 print ("<<< Flow to send:")
 print flow_entry.get_payload()
 time.sleep(rundelay)
 result = ofswitch.add_modify_flow(flow_entry)
 status = result.get_status()
 if(status.eq(STATUS.OK) == True):
     print ("<<< Flow successfully added to the Controller")
 else:
     print ("\n")
     print ("!!!Demo terminated, reason: %s" % status.brief().lower())
     exit(0)
开发者ID:jebpublic,项目名称:pybvcsamples,代码行数:33,代码来源:demo12.py


注:本文中的pybvc.openflowdev.ofswitch.Match.set_arp_tgt_hw_address方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。