Python OpTestHost.host_hexdump方法代码示例

# 需要导入模块: from common.OpTestHost import OpTestHost [as 别名]
# 或者: from common.OpTestHost.OpTestHost import host_hexdump [as 别名]
class OpTestAt24driver():
    ## Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd,i_bmcIP)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                 i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief  This function has following test steps
    #         1. Getting the host infromation(OS and kernel information)
    #         2. Loading the necessary modules to test at24 device driver functionalites
    #            (i2c_dev, i2c_opal and at24)
    #         3. Getting the list of i2c buses and eeprom chip addresses
    #         4. Accessing the registers visible through the i2cbus using i2cdump utility
    #         5. Getting the eeprom device data using hexdump utility in hex + Ascii format
    #
    # @return BMC_CONST.FW_SUCCESS-success or raise OpTestError
    #
    def testAt24driver(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        # Get OS level
        self.cv_HOST.host_get_OS_Level()

        # Check whether i2cdump and hexdump commands are available on host
        self.cv_HOST.host_check_command("i2cdump", "hexdump")

        # Get Kernel Version
        l_kernel = self.cv_HOST.host_get_kernel_version()

        # Loading i2c_opal module based on config option
        l_config = "CONFIG_I2C_OPAL"
        l_module = "i2c_opal"
        self.cv_HOST.host_load_module_based_on_config(l_kernel, l_config, l_module)

        # Loading i2c_dev module based on config option
        l_config = "CONFIG_I2C_CHARDEV"
        l_module = "i2c_dev"
        self.cv_HOST.host_load_module_based_on_config(l_kernel, l_config, l_module)

        # Loading at24 module based on config option
        l_config = "CONFIG_EEPROM_AT24"
        l_module = "at24"
        self.cv_HOST.host_load_module_based_on_config(l_kernel, l_config, l_module)

        # Get infomtion of EEPROM chips
        self.cv_HOST.host_get_info_of_eeprom_chips()

        # Get list of pairs of i2c bus and EEPROM device addresses in the host
        l_chips = self.cv_HOST.host_get_list_of_eeprom_chips()
        for l_args in l_chips:
            # Accessing the registers visible through the i2cbus using i2cdump utility
            # l_args format: "0 0x51","1 0x53",.....etc
            self.i2c_dump(l_args)

        # Getting the list of sysfs eeprom interfaces
        l_res = self.cv_HOST.host_run_command("find /sys/ -name eeprom; echo $?")
        l_res = l_res.splitlines()
        if int(l_res[-1]) == 0:
            pass
        else:
            l_msg = "EEPROM sysfs entries are not created"
            print l_msg
            raise OpTestError(l_msg)
        for l_dev in l_res:
            if l_dev.__contains__("eeprom"):
                # Getting the eeprom device data using hexdump utility in hex + Ascii format
                self.cv_HOST.host_hexdump(l_dev)
            else:
                pass
        return BMC_CONST.FW_SUCCESS

    ##
    # @brief This i2cdump function takes arguments in pair of a string like "i2cbus address".
    #        i2cbus indicates the number or name of the I2C bus to be scanned. This number should
    #        correspond  to  one  of  the busses listed by i2cdetect -l. address indicates
    #        the address to be scanned on that bus, and is an integer between 0x03 and 0x77
    #        i2cdump is a program to examine registers visible through the I2C bus
    #
    # @param i_args @type string: this is the argument to i2cdump utility
    #                             args are in the form of "i2c-bus-number eeprom-chip-address"
    #                             Ex: "0 0x51","3 0x52" ....etc
#.........这里部分代码省略.........