Python OpTestHost.host_compile_xscom_utilities方法代码示例

# 需要导入模块: from common.OpTestHost import OpTestHost [as 别名]
# 或者: from common.OpTestHost.OpTestHost import host_compile_xscom_utilities [as 别名]

#.........这里部分代码省略.........
    def test_prd_for_fir(self, FIR, FIMR, ERROR):
        chip_id = "0x" + self.random_chip
        print chip_id
        print "OPAL-PRD: Injecting error 0x%x on FIR: %s" % (ERROR, FIR)
        # Read Local Fault Isolation register
        l_cmd = "./getscom -c %s %s" % (chip_id, FIR)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)

        # Reading Local Fault Isolation mask register
        l_cmd = "./getscom -c %s %s" % (chip_id, FIMR)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        print l_res

        # Changing the FIMR value to un-masked value.
        LEN = 16
        l_len = len(l_res[-1])
        l_val = hex(int(("0x" + "0"*(LEN - l_len) + l_res[-1]), 16)& (ERROR ^ 0xffffffffffffffff))

        # Writing the same value to Local Fault Isolation mask register again
        l_cmd = "./putscom -c %s %s %s" % (chip_id, BMC_CONST.PBA_FAULT_ISOLATION_MASK_REGISTER, l_val)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)

        # Inject a core error on FIR
        l_cmd = "./putscom -c %s %s %s" % (chip_id, FIR, hex(ERROR))
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)

        time.sleep(30)

        # Read Local Fault Isolation register again
        l_cmd = "./getscom -c %s %s" % (chip_id, FIR)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        print l_res

        # Check FIR got cleared by opal-prd
        if l_res[-1] == BMC_CONST.FAULT_ISOLATION_REGISTER_CONTENT:
            print "Opal-prd handles core hardware error"
        else:
            l_msg = "Opal-prd not clearing hardware errors in runtime"
            print l_msg
            raise OpTestError(l_msg)

        # Reading the Local Fault Isolation Mask Register again
        l_cmd = "./getscom -c %s %s" % (chip_id, FIMR)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        print l_res

        # check for IPOLL mask register value to see opal-prd cleared the value
        l_cmd = "./getscom -c %s %s" % (chip_id, BMC_CONST.IPOLL_MASK_REGISTER)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        if l_res[-1] == BMC_CONST.IPOLL_MASK_REGISTER_CONTENT:
            print "Opal-prd cleared the IPOLL MASK REGISTER"
            return BMC_CONST.FW_SUCCESS
        else:
            l_msg = "Opal-prd is not clearing the IPOLL MASK REGISTER after injecting core FIR error"
            print l_msg
            raise OpTestError(l_msg)

    ##
    # @brief This is a common function for all the PRD test cases. This will be executed before
    #        any test case starts. Basically this provides below requirements.
    #        1. Validates all required host commands
    #        2. It will clone skiboot source repository
    #        3. Compile the necessary tools -xscom-utils(getscom and putscom)
    #        4. Get the list Of Chips.
    #           Ex: ['00000000', '00000001', '00000010']
    #        5. generate a random chip.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def test_init(self):
        # Get OS level
        self.cv_HOST.host_get_OS_Level()

        # Check whether git and gcc commands are available on host
        self.cv_HOST.host_check_command("git", "gcc")

        # It will clone skiboot source repository 
        self.cv_HOST.host_clone_skiboot_source(BMC_CONST.CLONE_SKIBOOT_DIR)

        # Compile the necessary tools xscom-utils and gard utility
        self.cv_HOST.host_compile_xscom_utilities(BMC_CONST.CLONE_SKIBOOT_DIR)

        # Getting list of processor chip Id's(executing getscom -l to get chip id's)
        l_res = self.cv_HOST.host_run_command("cd %s/external/xscom-utils/; ./getscom -l" % BMC_CONST.CLONE_SKIBOOT_DIR)
        l_res = l_res.splitlines()
        l_chips = []
        for line in l_res:
            matchObj = re.search("(\d{8}).*processor", line)
            if matchObj:
                l_chips.append(matchObj.group(1))
        if not l_chips:
            l_msg = "Getscom failed to list processor chip id's"
            raise OpTestError(l_msg)
        l_chips.sort()
        print l_chips # ['00000000', '00000001', '00000010']
        self.random_chip = random.choice(l_chips)

        # Below will be useful for debug purposes to compare chip information
        l_res = self.cv_HOST.host_read_msglog_core()
        print l_res

# 需要导入模块: from common.OpTestHost import OpTestHost [as 别名]
# 或者: from common.OpTestHost.OpTestHost import host_compile_xscom_utilities [as 别名]
class OpTestHMIHandling():
    ## Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the Host
    # @param i_hostuser The userid to log into the Host
    # @param i_hostPasswd The password of the userid to log into the Host with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP, i_ffdcDir)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                 i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief This is a common function for all the hmi test cases. This will be executed before
    #        any test case starts. Basically this provides below requirements.
    #        1. Validates all required host commands
    #        2. It will clone skiboot source repository
    #        3. Compile the necessary tools xscom-utils and gard utility to test HMI.
    #        4. Get the list Of Chips and cores in the form of dictionary.
    #           Ex: [['00000000', ['4', '5', '6', 'c', 'd', 'e']], ['00000001', ['4', '5', '6', 'c', 'd', 'e']], ['00000010', ['4', '5', '6', 'c', 'd', 'e']]]
    #        5. In-order to inject HMI errors on cpu's, cpu should be running,
    #           so disabling the sleep states 1 and 2 of all CPU's.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def test_init(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()

        # Get OS level
        self.l_oslevel = self.cv_HOST.host_get_OS_Level()

        # Check whether git and gcc commands are available on the host
        self.cv_HOST.host_check_command("git")
        self.cv_HOST.host_check_command("gcc")

        # It will clone skiboot source repository
        l_dir = "/tmp/skiboot"
        self.cv_HOST.host_clone_skiboot_source(l_dir)
        # Compile the necessary tools xscom-utils and gard utility
        self.cv_HOST.host_compile_xscom_utilities(l_dir)
        self.cv_HOST.host_compile_gard_utility(l_dir)

        # Getting list of processor chip Id's(executing getscom -l to get chip id's)
        l_res = self.cv_HOST.host_run_command("cd %s/external/xscom-utils/; ./getscom -l" % l_dir)
        l_res = l_res.splitlines()
        l_chips = []
        for line in l_res:
            matchObj = re.search("(\d{8}).*processor", line)
            if matchObj:
                l_chips.append(matchObj.group(1))
        if not l_chips:
            l_msg = "Getscom failed to list processor chip id's"
            raise OpTestError(l_msg)
        l_chips.sort()
        print l_chips # ['00000000', '00000001', '00000010']

        # Currently getting the list of active core id's with respect to each chip is by using opal msg log
        # TODO: Need to identify best way to get list of cores(If Opal msg log is empty)
        l_cmd = "cat /sys/firmware/opal/msglog | grep -i CHIP"
        l_res = self.cv_HOST.host_run_command(l_cmd)
        l_cores = {}
        self.l_dic = []
        l_res = l_res.splitlines()
        for line in l_res:
            matchObj = re.search("Chip (\d{1,2}) Core ([a-z0-9])", line)
            if matchObj:
                if l_cores.has_key(int(matchObj.group(1))):
                    (l_cores[int(matchObj.group(1))]).append(matchObj.group(2))
                else:
                    l_cores[int(matchObj.group(1))] = list(matchObj.group(2))
        if not l_cores:
            l_msg = "Failed in getting core id's information from OPAL msg log"
            raise OpTestError(l_msg)

        print l_cores # {0: ['4', '5', '6', 'c', 'd', 'e'], 1: ['4', '5', '6', 'c', 'd', 'e'], 10: ['4', '5', '6', 'c', 'd', 'e']}
        l_cores = sorted(l_cores.iteritems())
        print l_cores
        i=0
        for tup in l_cores:
            new_list = [l_chips[i], tup[1]]
            self.l_dic.append(new_list)
            i+=1
        print self.l_dic
        # self.l_dic is a list of chip id's, core id's . and is of below format 
        # [['00000000', ['4', '5', '6', 'c', 'd', 'e']], ['00000001', ['4', '5', '6', 'c', 'd', 'e']], ['00000010', ['4', '5', '6', 'c', 'd', 'e']]]

#.........这里部分代码省略.........

# 需要导入模块: from common.OpTestHost import OpTestHost [as 别名]
# 或者: from common.OpTestHost.OpTestHost import host_compile_xscom_utilities [as 别名]
class OpTestMCColdResetEffects():
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP, i_ffdcDir)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                                      i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                                      i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

        self.opTestSensors = OpTestSensors(i_bmcIP, i_bmcUser, i_bmcPasswd,
                                           i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                                           i_hostuser, i_hostPasswd)

    ##
    # @brief  This function will test BMC Cold reset vs Host FW status
    #         1. When system is in runtime issue BMC Cold reset.
    #         2. Check Host FW services and drivers.
    #         3. Run sensors command
    #         4. Get list of chips
    #         5. This is expected to fail.
    #           https://github.com/open-power/op-build/issues/482
    #         6. Reboot the system at the end of test.
    #
    # @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
    #
    def test_bmc_cold_reset_effects(self):
        print "Test BMC Cold reset effects versus Host Firmware Status"
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        print "Issue BMC Cold reset"
        result = True
        try:
            self.cv_SYSTEM.sys_cold_reset_bmc()
            l_dir = BMC_CONST.SKIBOOT_WORKING_DIR
            self.cv_HOST.host_clone_skiboot_source(l_dir)
            self.cv_HOST.host_compile_xscom_utilities(l_dir)
            l_con = self.cv_SYSTEM.sys_get_ipmi_console()
            self.cv_IPMI.ipmi_host_login(l_con)
            self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
            self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("cd %s/external/xscom-utils/; ./getscom -l" % l_dir)
            self.opTestSensors.test_hwmon_driver()
            self.cv_SYSTEM.sys_ipmi_close_console(l_con)
        except:
            result = False
            pass
        print "Gathering the OPAL msg logs"
        self.cv_HOST.host_gather_opal_msg_log()
        self.cv_IPMI.ipmi_power_off()
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        if result is False:
            raise OpTestError("MC Cold reset vs Host FW Test failed")