本文整理汇总了C#中BulletSharp.DiscreteDynamicsWorld.GetConstraint方法的典型用法代码示例。如果您正苦于以下问题：C# DiscreteDynamicsWorld.GetConstraint方法的具体用法？C# DiscreteDynamicsWorld.GetConstraint怎么用？C# DiscreteDynamicsWorld.GetConstraint使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类BulletSharp.DiscreteDynamicsWorld的用法示例。
在下文中一共展示了DiscreteDynamicsWorld.GetConstraint方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: Start
void Start()
{
//Create a World
Debug.Log("Initialize physics");
List<CollisionShape> CollisionShapes = new List<CollisionShape>();
DefaultCollisionConfiguration CollisionConf = new DefaultCollisionConfiguration();
CollisionDispatcher Dispatcher = new CollisionDispatcher(CollisionConf);
DbvtBroadphase Broadphase = new DbvtBroadphase();
DiscreteDynamicsWorld World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, null, CollisionConf);
World.Gravity = new BulletSharp.Math.Vector3(0, -10, 0);
// create a few dynamic rigidbodies
const float mass = 1.0f;
//Add a single cube
RigidBody fallRigidBody;
BoxShape shape = new BoxShape(1f, 1f, 1f);
BulletSharp.Math.Vector3 localInertia = BulletSharp.Math.Vector3.Zero;
shape.CalculateLocalInertia(mass, out localInertia);
RigidBodyConstructionInfo rbInfo = new RigidBodyConstructionInfo(mass, null, shape, localInertia);
fallRigidBody = new RigidBody(rbInfo);
rbInfo.Dispose();
Matrix st = Matrix.Translation(new BulletSharp.Math.Vector3(0f, 10f, 0f));
fallRigidBody.WorldTransform = st;
World.AddRigidBody(fallRigidBody);
//Step the simulation 300 steps
for (int i = 0; i < 300; i++)
{
World.StepSimulation(1f / 60f, 10);
Matrix trans;
fallRigidBody.GetWorldTransform(out trans);
Debug.Log("box height: " + trans.Origin);
}
//Clean up.
World.RemoveRigidBody(fallRigidBody);
fallRigidBody.Dispose();
UnityEngine.Debug.Log("ExitPhysics");
if (World != null)
{
//remove/dispose constraints
int i;
for (i = World.NumConstraints - 1; i >= 0; i--)
{
TypedConstraint constraint = World.GetConstraint(i);
World.RemoveConstraint(constraint);
constraint.Dispose();
}
//remove the rigidbodies from the dynamics world and delete them
for (i = World.NumCollisionObjects - 1; i >= 0; i--)
{
CollisionObject obj = World.CollisionObjectArray[i];
RigidBody body = obj as RigidBody;
if (body != null && body.MotionState != null)
{
body.MotionState.Dispose();
}
World.RemoveCollisionObject(obj);
obj.Dispose();
}
//delete collision shapes
foreach (CollisionShape ss in CollisionShapes)
ss.Dispose();
CollisionShapes.Clear();
World.Dispose();
Broadphase.Dispose();
Dispatcher.Dispose();
CollisionConf.Dispose();
}
if (Broadphase != null)
{
Broadphase.Dispose();
}
if (Dispatcher != null)
{
Dispatcher.Dispose();
}
if (CollisionConf != null)
{
CollisionConf.Dispose();
}
}示例2: SimulateBall
//IMPORTANT Time.fixedTime must match the timestep being used here.
public static List<UnityEngine.Vector3> SimulateBall(BRigidBody ballRb, UnityEngine.Vector3 ballThrowForce, int numberOfSimulationSteps, bool reverseOrder)
{
var ballPositions = new List<UnityEngine.Vector3>(numberOfSimulationSteps);
//Create a World
Debug.Log("Initialize physics");
CollisionConfiguration CollisionConf;
CollisionDispatcher Dispatcher;
BroadphaseInterface Broadphase;
CollisionWorld cw;
SequentialImpulseConstraintSolver Solver;
BulletSharp.SoftBody.SoftBodyWorldInfo softBodyWorldInfo;
//This should create a copy of the BPhysicsWorld with the same settings
BPhysicsWorld bw = BPhysicsWorld.Get();
bw.CreatePhysicsWorld(out cw, out CollisionConf, out Dispatcher, out Broadphase, out Solver, out softBodyWorldInfo);
World = (DiscreteDynamicsWorld) cw;
//Copy all existing rigidbodies in scene
// IMPORTANT rigidbodies must be added to the offline world in the same order that they are in the source world
// this is because collisions must be resolved in the same order for the sim to be deterministic
DiscreteDynamicsWorld sourceWorld = (DiscreteDynamicsWorld) bw.world;
BulletSharp.RigidBody bulletBallRb = null;
BulletSharp.Math.Matrix mm = BulletSharp.Math.Matrix.Identity;
for(int i = 0; i < sourceWorld.NumCollisionObjects; i++)
{
CollisionObject co = sourceWorld.CollisionObjectArray[i];
if (co != null && co.UserObject is BRigidBody)
{
BRigidBody rb = (BRigidBody) co.UserObject;
float mass = rb.isDynamic() ? rb.mass : 0f;
BCollisionShape existingShape = rb.GetComponent<BCollisionShape>();
CollisionShape shape = null;
if (existingShape is BSphereShape)
{
shape = ((BSphereShape)existingShape).CopyCollisionShape();
}
else if (existingShape is BBoxShape)
{
shape = ((BBoxShape)existingShape).CopyCollisionShape();
}
RigidBody bulletRB = null;
BulletSharp.Math.Vector3 localInertia = new BulletSharp.Math.Vector3();
rb.CreateOrConfigureRigidBody(ref bulletRB, ref localInertia, shape, null);
BulletSharp.Math.Vector3 pos = rb.GetCollisionObject().WorldTransform.Origin;
BulletSharp.Math.Quaternion rot = rb.GetCollisionObject().WorldTransform.GetOrientation();
BulletSharp.Math.Matrix.AffineTransformation(1f, ref rot, ref pos, out mm);
bulletRB.WorldTransform = mm;
World.AddRigidBody(bulletRB, rb.groupsIBelongTo, rb.collisionMask);
if (rb == ballRb)
{
bulletBallRb = bulletRB;
bulletRB.ApplyCentralImpulse(ballThrowForce.ToBullet());
}
}
}
//Step the simulation numberOfSimulationSteps times
for (int i = 0; i < numberOfSimulationSteps; i++)
{
int numSteps = World.StepSimulation(1f / 60f, 10, 1f / 60f);
ballPositions.Add(bulletBallRb.WorldTransform.Origin.ToUnity());
}
UnityEngine.Debug.Log("ExitPhysics");
if (World != null)
{
//remove/dispose constraints
int i;
for (i = World.NumConstraints - 1; i >= 0; i--)
{
TypedConstraint constraint = World.GetConstraint(i);
World.RemoveConstraint(constraint);
constraint.Dispose();
}
//remove the rigidbodies from the dynamics world and delete them
for (i = World.NumCollisionObjects - 1; i >= 0; i--)
{
CollisionObject obj = World.CollisionObjectArray[i];
RigidBody body = obj as RigidBody;
if (body != null && body.MotionState != null)
{
body.MotionState.Dispose();
}
World.RemoveCollisionObject(obj);
obj.Dispose();
}
World.Dispose();
Broadphase.Dispose();
Dispatcher.Dispose();
CollisionConf.Dispose();
}
if (Broadphase != null)
{
//.........这里部分代码省略.........