C# DenseVector.CopyTo方法代码示例

//.........这里部分代码省略.........
            Vector vecSdash = new DenseVector(residuals.Count);
            Vector temp = new DenseVector(residuals.Count);
            Vector temp2 = new DenseVector(residuals.Count);

            // create some temporary double variables that are needed
            // to hold values in between iterations
            Complex currentRho = 0;
            Complex alpha = 0;
            Complex omega = 0;

            var iterationNumber = 0;
            while (ShouldContinue(iterationNumber, result, input, residuals))
            {
                // rho_(i-1) = r~^T r_(i-1) // dotproduct r~ and r_(i-1)
                var oldRho = currentRho;
                currentRho = tempResiduals.DotProduct(residuals);

                // if (rho_(i-1) == 0) // METHOD FAILS
                // If rho is only 1 ULP from zero then we fail.
                if (currentRho.Real.AlmostEqual(0, 1) && currentRho.Imaginary.AlmostEqual(0, 1))
                {
                    // Rho-type breakdown
                    throw new Exception("Iterative solver experience a numerical break down");
                }

                if (iterationNumber != 0)
                {
                    // beta_(i-1) = (rho_(i-1)/rho_(i-2))(alpha_(i-1)/omega(i-1))
                    var beta = (currentRho / oldRho) * (alpha / omega);

                    // p_i = r_(i-1) + beta_(i-1)(p_(i-1) - omega_(i-1) * nu_(i-1))
                    nu.Multiply(-omega, temp);
                    vecP.Add(temp, temp2);
                    temp2.CopyTo(vecP);

                    vecP.Multiply(beta, vecP);
                    vecP.Add(residuals, temp2);
                    temp2.CopyTo(vecP);
                }
                else
                {
                    // p_i = r_(i-1)
                    residuals.CopyTo(vecP);
                }

                // SOLVE Mp~ = p_i // M = preconditioner
                _preconditioner.Approximate(vecP, vecPdash);
                
                // nu_i = Ap~
                matrix.Multiply(vecPdash, nu);

                // alpha_i = rho_(i-1)/ (r~^T nu_i) = rho / dotproduct(r~ and nu_i)
                alpha = currentRho * 1 / tempResiduals.DotProduct(nu);

                // s = r_(i-1) - alpha_i nu_i
                nu.Multiply(-alpha, temp);
                residuals.Add(temp, vecS);

                // Check if we're converged. If so then stop. Otherwise continue;
                // Calculate the temporary result. 
                // Be careful not to change any of the temp vectors, except for
                // temp. Others will be used in the calculation later on.
                // x_i = x_(i-1) + alpha_i * p^_i + s^_i
                vecPdash.Multiply(alpha, temp);
                temp.Add(vecSdash, temp2);
                temp2.CopyTo(temp);

        /// <summary>
        /// Solves the matrix equation Ax = b, where A is the coefficient matrix, b is the
        /// solution vector and x is the unknown vector.
        /// </summary>
        /// <param name="matrix">The coefficient matrix, <c>A</c>.</param>
        /// <param name="input">The solution vector, <c>b</c></param>
        /// <param name="result">The result vector, <c>x</c></param>
        public void Solve(Matrix matrix, Vector input, Vector result)
        {
            // If we were stopped before, we are no longer
            // We're doing this at the start of the method to ensure
            // that we can use these fields immediately.
            _hasBeenStopped = false;

            // Error checks
            if (matrix == null)
            {
                throw new ArgumentNullException("matrix");
            }

            if (matrix.RowCount != matrix.ColumnCount)
            {
                throw new ArgumentException(Resources.ArgumentMatrixSquare, "matrix");
            }

            if (input == null)
            {
                throw new ArgumentNullException("input");
            }

            if (result == null)
            {
                throw new ArgumentNullException("result");
            }

            if (result.Count != input.Count)
            {
                throw new ArgumentException(Resources.ArgumentVectorsSameLength);
            }

            if (input.Count != matrix.RowCount)
            {
                throw Matrix.DimensionsDontMatch<ArgumentException>(input, matrix);
            }

            // Initialize the solver fields
            // Set the convergence monitor
            if (_iterator == null)
            {
                _iterator = Iterator.CreateDefault();
            }

            if (_preconditioner == null)
            {
                _preconditioner = new UnitPreconditioner();
            }

            _preconditioner.Initialize(matrix);

            var d = new DenseVector(input.Count);
            var r = new DenseVector(input);

            var uodd = new DenseVector(input.Count);
            var ueven = new DenseVector(input.Count);

            var v = new DenseVector(input.Count);
            var pseudoResiduals = new DenseVector(input);

            var x = new DenseVector(input.Count);
            var yodd = new DenseVector(input.Count);
            var yeven = new DenseVector(input);

            // Temp vectors
            var temp = new DenseVector(input.Count);
            var temp1 = new DenseVector(input.Count);
            var temp2 = new DenseVector(input.Count);

            // Initialize
            var startNorm = input.Norm(2);

            // Define the scalars
            double alpha = 0;
            double eta = 0;
            double theta = 0;

            var tau = startNorm;
            var rho = tau * tau;

            // Calculate the initial values for v
            // M temp = yEven
            _preconditioner.Approximate(yeven, temp);

            // v = A temp
            matrix.Multiply(temp, v);

            // Set uOdd
            v.CopyTo(ueven);

            // Start the iteration
            var iterationNumber = 0;
//.........这里部分代码省略.........

//.........这里部分代码省略.........
            Vector u = new DenseVector(residuals.Count);
            Vector y = new DenseVector(residuals.Count);
            Vector z = new DenseVector(residuals.Count);

            Vector temp = new DenseVector(residuals.Count);
            Vector temp2 = new DenseVector(residuals.Count);
            Vector temp3 = new DenseVector(residuals.Count);

            // for (k = 0, 1, .... )
            var iterationNumber = 0;
            while (ShouldContinue(iterationNumber, xtemp, input, residuals))
            {
                // p_k = r_k + beta_(k-1) * (p_(k-1) - u_(k-1))
                p.Subtract(u, temp);

                temp.Multiply(beta, temp2);
                residuals.Add(temp2, p);

                // Solve M b_k = p_k
                _preconditioner.Approximate(p, temp);

                // s_k = A b_k
                matrix.Multiply(temp, s);

                // alpha_k = (r*_0 * r_k) / (r*_0 * s_k)
                var alpha = rdash.DotProduct(residuals) / rdash.DotProduct(s);

                // y_k = t_(k-1) - r_k - alpha_k * w_(k-1) + alpha_k s_k
                s.Subtract(w, temp);
                t.Subtract(residuals, y);

                temp.Multiply(alpha, temp2);
                y.Add(temp2, temp3);
                temp3.CopyTo(y);

                // Store the old value of t in t0
                t.CopyTo(t0);

                // t_k = r_k - alpha_k s_k
                s.Multiply(-alpha, temp2);
                residuals.Add(temp2, t);

                // Solve M d_k = t_k
                _preconditioner.Approximate(t, temp);

                // c_k = A d_k
                matrix.Multiply(temp, c);
                var cdot = c.DotProduct(c);

                // cDot can only be zero if c is a zero vector
                // We'll set cDot to 1 if it is zero to prevent NaN's
                // Note that the calculation should continue fine because
                // c.DotProduct(t) will be zero and so will c.DotProduct(y)
                if (cdot.AlmostEqual(0, 1))
                {
                    cdot = 1.0f;
                }

                // Even if we don't want to do any BiCGStab steps we'll still have
                // to do at least one at the start to initialize the
                // system, but we'll only have to take special measures
                // if we don't do any so ...
                var ctdot = c.DotProduct(t);
                float eta;
                if (((_numberOfBiCgStabSteps == 0) && (iterationNumber == 0)) || ShouldRunBiCgStabSteps(iterationNumber))
                {

//.........这里部分代码省略.........
                }
            }

            _startingVectors = useOld ? _startingVectors : CreateStartingVectors(_numberOfStartingVectors, input.Count);

            // Store the number of starting vectors. Not really necessary but easier to type :)
            var k = _startingVectors.Count;

            // r_0 = b - Ax_0
            // This is basically a SAXPY so it could be made a lot faster
            Vector residuals = new DenseVector(matrix.RowCount);
            CalculateTrueResidual(matrix, residuals, xtemp, input);

            // Define the temporary values
            var c = new Complex[k];

            // Define the temporary vectors
            Vector gtemp = new DenseVector(residuals.Count);

            Vector u = new DenseVector(residuals.Count);
            Vector utemp = new DenseVector(residuals.Count);
            Vector temp = new DenseVector(residuals.Count);
            Vector temp1 = new DenseVector(residuals.Count);
            Vector temp2 = new DenseVector(residuals.Count);

            Vector zd = new DenseVector(residuals.Count);
            Vector zg = new DenseVector(residuals.Count);
            Vector zw = new DenseVector(residuals.Count);

            var d = CreateVectorArray(_startingVectors.Count, residuals.Count);

            // g_0 = r_0
            var g = CreateVectorArray(_startingVectors.Count, residuals.Count);
            residuals.CopyTo(g[k - 1]);

            var w = CreateVectorArray(_startingVectors.Count, residuals.Count);

            // FOR (j = 0, 1, 2 ....)
            var iterationNumber = 0;
            while (ShouldContinue(iterationNumber, xtemp, input, residuals))
            {
                // SOLVE M g~_((j-1)k+k) = g_((j-1)k+k)
                _preconditioner.Approximate(g[k - 1], gtemp);

                // w_((j-1)k+k) = A g~_((j-1)k+k)
                matrix.Multiply(gtemp, w[k - 1]);

                // c_((j-1)k+k) = q^T_1 w_((j-1)k+k)
                c[k - 1] = _startingVectors[0].DotProduct(w[k - 1]);
                if (c[k - 1].Real.AlmostEqual(0, 1) && c[k - 1].Imaginary.AlmostEqual(0, 1))
                {
                    throw new Exception("Iterative solver experience a numerical break down");
                }

                // alpha_(jk+1) = q^T_1 r_((j-1)k+k) / c_((j-1)k+k)
                var alpha = _startingVectors[0].DotProduct(residuals) / c[k - 1];

                // u_(jk+1) = r_((j-1)k+k) - alpha_(jk+1) w_((j-1)k+k)
                w[k - 1].Multiply(-alpha, temp);
                residuals.Add(temp, u);

                // SOLVE M u~_(jk+1) = u_(jk+1)
                _preconditioner.Approximate(u, temp1);
                temp1.CopyTo(utemp);

                // rho_(j+1) = -u^t_(jk+1) A u~_(jk+1) / ||A u~_(jk+1)||^2