本文整理汇总了C#中Circuit.stampVoltageSource方法的典型用法代码示例。如果您正苦于以下问题：C# Circuit.stampVoltageSource方法的具体用法？C# Circuit.stampVoltageSource怎么用？C# Circuit.stampVoltageSource使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Circuit的用法示例。
在下文中一共展示了Circuit.stampVoltageSource方法的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: stamp
public override void stamp(Circuit sim)
{
if (waveform == WaveType.DC) {
sim.stampVoltageSource(0, lead_node[0], voltSource, getVoltage(sim));
} else {
sim.stampVoltageSource(0, lead_node[0], voltSource);
}
}示例2: stamp
public override void stamp(Circuit sim)
{
// output pin
sim.stampVoltageSource(0, lead_node[1], pins[1].voltSource);
// attach Vi to R1 pin so its current is proportional to Vi
sim.stampVoltageSource(lead_node[0], lead_node[4], pins[4].voltSource, 0);
// attach 5V to R2 pin so we get a current going
sim.stampVoltageSource(0, lead_node[5], pins[5].voltSource, 5);
// put resistor across cap pins to give current somewhere to go
// in case cap is not connected
sim.stampResistor(lead_node[2], lead_node[3], cResistance);
sim.stampNonLinear(lead_node[2]);
sim.stampNonLinear(lead_node[3]);
}示例3: getVoltageText
/*public override void getInfo(String[] arr) {
arr[0] = (gain == 1) ? "CCII+" : "CCII-";
arr[1] = "X,Y = " + getVoltageText(lead_volt[0]);
arr[2] = "Z = " + getVoltageText(lead_volt[2]);
arr[3] = "I = " + getCurrentText(pins[0].current);
}*/
// boolean nonLinear() { return true; }
public override void stamp(Circuit sim)
{
// X voltage = Y voltage
sim.stampVoltageSource(0, lead_node[0], pins[0].voltSource);
sim.stampVCVS(0, lead_node[1], 1, pins[0].voltSource);
// Z current = gain * X current
sim.stampCCCS(0, lead_node[2], pins[0].voltSource, gain);
}示例4: step
public override void step(Circuit sim)
{
bool v1 = lead_volt[0] > 2.5;
bool v2 = lead_volt[1] > 2.5;
if(v1 && !pins[0].value)
ff1 = true;
if(v2 && !pins[1].value)
ff2 = true;
if(ff1 && ff2)
ff1 = ff2 = false;
double @out = (ff1) ? 5 : (ff2) ? 0 : -1;
// System.out.println(out + " " + v1 + " " + v2);
if(@out != -1) {
sim.stampVoltageSource(0, lead_node[2], pins[2].voltSource, @out);
} else {
// tie current through output pin to 0
int vn = sim.nodeCount + pins[2].voltSource;
sim.stampMatrix(vn, vn, 1);
}
pins[0].value = v1;
pins[1].value = v2;
}示例5: stamp
public override void stamp(Circuit sim)
{
sim.stampVoltageSource(0, lead_node[inputCount], voltSource);
}示例6: stamp
public override void stamp(Circuit sim)
{
// stamp voltage divider to put ctl pin at 2/3 V
sim.stampResistor(lead_node[N_VIN], lead_node[N_CTL], 5000);
sim.stampResistor(lead_node[N_CTL], 0, 10000);
// output pin
sim.stampVoltageSource(0, lead_node[N_OUT], pins[N_OUT].voltSource);
// discharge pin
sim.stampNonLinear(lead_node[N_DIS]);
}示例7: stamp
public override void stamp(Circuit sim)
{
sim.stampVoltageSource(0, lead_node[3], voltSource);
sim.stampNonLinear(lead_node[3]);
sim.stampNonLinear(lead_node[1]);
}示例8: stamp
public override void stamp(Circuit sim)
{
if(position == 0)
sim.stampVoltageSource(lead_node[0], lead_node[1], voltSource, 0);
}示例9: stamp
public override void stamp(Circuit sim)
{
for(int i = 0; i != getLeadCount(); i++) {
Pin p = pins[i];
if(p.output)
sim.stampVoltageSource(0, lead_node[i], p.voltSource);
}
}示例10: stamp
public override void stamp(Circuit sim)
{
sim.stampVoltageSource(0, lead_node[0], voltSource, 0);
}示例11: stamp
public override void stamp(Circuit sim)
{
sim.stampVoltageSource(lead_node[4], lead_node[0], voltSource1);
sim.stampVoltageSource(lead_node[5], lead_node[1], voltSource2);
sim.stampResistor(lead_node[2], lead_node[4], impedance);
sim.stampResistor(lead_node[3], lead_node[5], impedance);
}示例12: stamp
public override void stamp(Circuit sim)
{
double v = (position == 0) ? lowVoltage : highVoltage;
if(isTernary) v = position * 2.5;
sim.stampVoltageSource(0, lead_node[0], voltSource, v);
}示例13: stamp
public override void stamp(Circuit sim)
{
if(position == 2) return; // in center?
sim.stampVoltageSource(lead_node[0], lead_node[position + 1], voltSource, 0);
}