C++ Geometry::getNumTexCoordArrays方法代码示例

        void apply(osg::Geometry& geom)
        {
            geom.setUseDisplayList(false);

            if (!_manualVertexAliasing) return;

            osg::notify(osg::NOTICE)<<"Found geometry "<<&geom<<std::endl;
            if (geom.getVertexArray())
            {
                setVertexAttrib(geom, _vertexAlias, geom.getVertexArray(), false, osg::Array::BIND_PER_VERTEX);
                geom.setVertexArray(0);
            }

            if (geom.getNormalArray())
            {
                setVertexAttrib(geom, _normalAlias, geom.getNormalArray(), true);
                geom.setNormalArray(0);
            }

            if (geom.getColorArray())
            {
                setVertexAttrib(geom, _colorAlias, geom.getColorArray(), false);
                geom.setColorArray(0);
            }

            if (geom.getSecondaryColorArray())
            {
                setVertexAttrib(geom, _secondaryColorAlias, geom.getSecondaryColorArray(), false);
                geom.setSecondaryColorArray(0);
            }

            if (geom.getFogCoordArray())
            {
                // should we normalize the FogCoord array? Don't think so...
                setVertexAttrib(geom, _fogCoordAlias, geom.getFogCoordArray(), false);
                geom.setFogCoordArray(0);
            }

            unsigned int maxNumTexCoords = geom.getNumTexCoordArrays();
            if (maxNumTexCoords>8)
            {
                osg::notify(osg::NOTICE)<<"Warning: Ignoring "<<maxNumTexCoords-8<<" texture coordinate arrays, only 8 are currently supported in vertex attribute conversion code."<<std::endl;
                maxNumTexCoords = 8;
            }
            for(unsigned int i=0; i<maxNumTexCoords; ++i)
            {
                if (geom.getTexCoordArray(i))
                {
                    setVertexAttrib(geom, _texCoordAlias[i], geom.getTexCoordArray(i), false, osg::Array::BIND_PER_VERTEX);
                    geom.setTexCoordArray(i,0);
                }
                else
                {
                    osg::notify(osg::NOTICE)<<"Found empty TexCoordArray("<<i<<")"<<std::endl;
                }
            }
        }

void RigGeometry::copyFrom(osg::Geometry& from)
{
    bool copyToSelf = (this==&from);

    osg::Geometry& target = *this;

    if (!copyToSelf) target.setStateSet(from.getStateSet());

    // copy over primitive sets.
    if (!copyToSelf) target.getPrimitiveSetList() = from.getPrimitiveSetList();

    if (from.getVertexArray())
    {
        if (!copyToSelf) target.setVertexArray(from.getVertexArray());
    }

    if (from.getNormalArray())
    {
        if (!copyToSelf) target.setNormalArray(from.getNormalArray());
    }

    if (from.getColorArray())
    {
        if (!copyToSelf) target.setColorArray(from.getColorArray());
    }

    if (from.getSecondaryColorArray())
    {
        if (!copyToSelf) target.setSecondaryColorArray(from.getSecondaryColorArray());
    }

    if (from.getFogCoordArray())
    {
        if (!copyToSelf) target.setFogCoordArray(from.getFogCoordArray());
    }

    for(unsigned int ti=0;ti<from.getNumTexCoordArrays();++ti)
    {
        if (from.getTexCoordArray(ti))
        {
            if (!copyToSelf) target.setTexCoordArray(ti,from.getTexCoordArray(ti));
        }
    }

    osg::Geometry::ArrayList& arrayList = from.getVertexAttribArrayList();
    for(unsigned int vi=0;vi< arrayList.size();++vi)
    {
        osg::Array* array = arrayList[vi].get();
        if (array)
        {
            if (!copyToSelf) target.setVertexAttribArray(vi,array);
        }
    }
}

 VertexAttribComparitor(osg::Geometry& geometry)
 {
     add(geometry.getVertexArray());
     add(geometry.getNormalArray());
     add(geometry.getColorArray());
     add(geometry.getSecondaryColorArray());
     add(geometry.getFogCoordArray());
     unsigned int i;
     for(i=0;i<geometry.getNumTexCoordArrays();++i)
     {
         add(geometry.getTexCoordArray(i));
     }
     for(i=0;i<geometry.getNumVertexAttribArrays();++i)
     {
         add(geometry.getVertexAttribArray(i));
     }
 }

void Tessellator::retessellatePolygons(osg::Geometry &geom)
{
#ifdef OSG_GLU_AVAILABLE
    // turn the contour list into primitives, a little like Tessellator does but more generally
    osg::Vec3Array* vertices = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
    
    if (!vertices || vertices->empty() || geom.getPrimitiveSetList().empty()) return;


    // we currently don't handle geometry which use indices...
    if (geom.getVertexIndices() ||
        geom.getNormalIndices() ||
        geom.getColorIndices() ||
        geom.getSecondaryColorIndices() ||
        geom.getFogCoordIndices()) return;
        
    // not even text coord indices don't handle geometry which use indices...
    for(unsigned int unit=0;unit<geom.getNumTexCoordArrays();++unit)
    {
        if (geom.getTexCoordIndices(unit)) return;
    }

    if (_ttype==TESS_TYPE_POLYGONS || _ttype==TESS_TYPE_DRAWABLE) _numberVerts=0; // 09.04.04 GWM reset Tessellator
    // the reset is needed by the flt loader which reuses a Tessellator for triangulating polygons.
    // as such it might be reset by other loaders/developers in future.
    _index=0; // reset the counter for indexed vertices
    _extraPrimitives = 0;
    if (!_numberVerts) {
        _numberVerts=geom.getVertexArray()->getNumElements();
        // save the contours for complex (winding rule) tessellations
        _Contours=geom.getPrimitiveSetList();
    }

    // now cut out vertex attributes added on any previous tessellation
    reduceArray(geom.getVertexArray(), _numberVerts);
    reduceArray(geom.getColorArray(), _numberVerts);
    reduceArray(geom.getNormalArray(), _numberVerts);
    reduceArray(geom.getFogCoordArray(), _numberVerts);
    for(unsigned int unit1=0;unit1<geom.getNumTexCoordArrays();++unit1)
    {
        reduceArray(geom.getTexCoordArray(unit1), _numberVerts);
    }

    // remove the existing primitives.
    unsigned int nprimsetoriginal= geom.getNumPrimitiveSets();
    if (nprimsetoriginal) geom.removePrimitiveSet(0, nprimsetoriginal);

    // the main difference from osgUtil::Tessellator for Geometry sets of multiple contours is that the begin/end tessellation
    // occurs around the whole set of contours.
    if (_ttype==TESS_TYPE_GEOMETRY) {
        beginTessellation();
        gluTessProperty(_tobj, GLU_TESS_WINDING_RULE, _wtype);
        gluTessProperty(_tobj, GLU_TESS_BOUNDARY_ONLY , _boundaryOnly);
    }
    // process all the contours into the Tessellator
    int noContours = _Contours.size();
    int currentPrimitive = 0;
    for(int primNo=0;primNo<noContours;++primNo)
    {
        osg::ref_ptr<osg::PrimitiveSet> primitive = _Contours[primNo].get();
        if (_ttype==TESS_TYPE_POLYGONS || _ttype==TESS_TYPE_DRAWABLE)
        { // this recovers the 'old' tessellation which just retessellates single polygons.
            if (primitive->getMode()==osg::PrimitiveSet::POLYGON || _ttype==TESS_TYPE_DRAWABLE)
            {

                if (primitive->getType()==osg::PrimitiveSet::DrawArrayLengthsPrimitiveType)
                {
                    osg::DrawArrayLengths* drawArrayLengths = static_cast<osg::DrawArrayLengths*>(primitive.get());
                    unsigned int first = drawArrayLengths->getFirst(); 
                    for(osg::DrawArrayLengths::iterator itr=drawArrayLengths->begin();
                        itr!=drawArrayLengths->end();
                        ++itr)
                    {
                        beginTessellation();
                            unsigned int last = first + *itr;
                            addContour(primitive->getMode(),first,last,vertices);
                            first = last;
                        endTessellation();
                        collectTessellation(geom, currentPrimitive);
                        currentPrimitive++;
                    }
                }
                else
                {
                    if (primitive->getNumIndices()>3) { // April 2005 gwm only retessellate "complex" polygons
                        beginTessellation();
                        addContour(primitive.get(), vertices);
                        endTessellation();
                        collectTessellation(geom, currentPrimitive);
                        currentPrimitive++;
                    } else { // April 2005 gwm triangles don't need to be retessellated
                        geom.addPrimitiveSet(primitive.get());
                    }
                }

            }
            else
            { // copy the contour primitive as it is not being tessellated
                geom.addPrimitiveSet(primitive.get());
            }
//.........这里部分代码省略.........